Вы находитесь на странице: 1из 3

Removing the Fixing Cleaning Web

<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the Fixing Assembly")
2. Remove the Fixing Assembly. (Reference)
3. Remove the Fixing Front Cover.
3-1) Remove the Fixing Front Cover.
2 Screws

4. Remove the Fixing Upper Cover.


4-1) Remove the Handle by sliding to the rear side.

4-2) Remove the Fixing Upper Cover.


1 Screw
<Procedure>
1) Open the Fixing Cleaning Web Cover.
2 Screws
NOTE:
Because it is engaged, hold the Fixing Cleaning Web Cover to remove the screws.

2) Remove the Fixing Cleaning Web.

CAUIOTN: Points to Caution at Installation


Be sure to install the Fixing Cleaning Web in the correct direction.

When installing the Fixing Cleaning Web, be sure to wind the web around the Web Take-up Roller until the green
line on the web disappears from view.

Вам также может понравиться