Академический Документы
Профессиональный Документы
Культура Документы
TRAINING SESSIONS
OFFERED AT SOLIDXPERTS
ENSURE YOUR SUCCESS WITH SOLIDWORKS …
SolidWorks training courses focus on fundamental skills and concepts.
As an Authorized SolidWorks Training Center, SolidXperts provides both basic and advanced training
of the highest quality. Our trainers are certified by DS SolidWorks Corp. Each course includes a
training book, as well as practice sessions for which each participant is given access to a computer.
Course Outlines for SolidWorks
® SolidXperts, inc. All Rights Reserved.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
(CONTINUED)
6. Forming Tools and Gussets Appendix A : Sheet Metal Tables
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
(CONTINUED)
8. Reusable Data
▪ Reusing data
▪ Task pane
▪ SolidWorks Resources
▪ Design library
▪ Files Explorer
▪ Library features
▪ Configurations in library features
▪ Smart component
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
(CONTINUED)
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
(CONTINUED)
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
(CONTINUED)
6. Freeform Shapes
▪ Subdivision Modeling
▪ 2D Freeform Shapes
▪ 3D Freeform Shapes
▪ Modifying the Shape
▪ Finishing the Freeform
▪ Applying Material
▪ Publishing Images
▪ Setting the Lighting
▪ Preparing the Output Image
▪ Rendering the Image
▪ Further Customizing the View
▪ Bending a Freeform
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Page 23
Course Outline for Simulation
▪ Mesh control
▪ Understanding the effect of boundary conditions
10. Mixed Meshing Solids, Beams & Shells
▪ Mixed meshing
3. Assembly Analysis with Contacts ▪ Beam Imprint
▪ Contact analysis
▪ Pliers with global contact
11. Design Study
▪ Pliers with local contact
▪ Design study
▪ Part 1: multiple load cases
4.Symmetrical and Free Self-Equilibrated ▪ Part 2: Geometry modification
Assemblies
12. Thermal Stress Analysis
▪ Shrink fit parts
▪ Analysis with soft springs ▪ Thermal stress analysis
▪ Examining results in local coordinate systems (optional)
5. Assembly Analysis with Connectors and ▪ Saving models in its deformed shape
Mesh Refinement
13. Adaptive Meshing
▪ Connecting components
▪ Connectors ▪ Adaptive meshing
▪ Mesh Control in an Assembly ▪ H-adaptivity study
▪ Problem statement ▪ P-Adaptivity study
▪ Part 1: Draft quality coarse mesh analysis ▪ H vs P elements – summary
▪ Part 2: High quality mesh analysis
14. Large Displacement Analysis
6. Compatible/ Incompatible Mesh
▪ Small vs Large displacement analysis
▪ Compatible /incompatible meshing ▪ Part 1: small displacement linear analysis
▪ Part 2: Large displacement non-linear analysis
7. Analysis of Thin Components
▪ Thin components
▪ Part 1: Mesh with solid elements
▪ Part 2: Refined solid mesh
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
▪ Fatigue
▪ Stress-life (S-N) based fatigue
▪ Thermal study
▪ Thermal stress study
▪ Fatigue terminology
▪ Fatigue study
▪ Fatigue study with dead load (optional)
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
▪ Problem statement
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
6. EFD Zooming
▪ EFD zooming
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
1. Introduction to HVAC
▪ Objectives
▪ HVAC Module
▪ Case Study: Office
▪ Project Description
▪ Radiation
▪ Radiation Transparency
▪ Radiation Source
▪ Radiative Surface
▪ Discussion
▪ Comfort Parameters
▪ Conclusions
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
1. SustainabilityXpress
▪ Using the Environmental Impact Dashboard
▪ Evaluating the Environmental Impact of a ▪ Impact Assessment Methodologies
Part ▪ Creating a Report
▪ Selecting a Material ▪ Exporting Settings for a SolidWorks
▪ Using the Find Similar Material Tool Sustainability Study
▪ Setting the Manufacturing Options ▪ Evaluating the Environmental Impact of an
▪ Setting Use Options Assembly
▪ Using the Environmental Impact Dashboard ▪ Preparing the Assembly to Be Evaluated
▪ Impact Assessment Methodologies ▪ Defining the Assembly Process
▪ Creating a Report ▪ Specifying Assembly Use Parameters
▪ Exporting Settings for a SolidWorks ▪ Modifying Transportation Defaults
Sustainability Study ▪ Modifying End of Life Disposal Defaults
▪ Adding Materials ▪ Specifying Duration of Use
▪ Updating the Materials Database ▪ Modifying Components
▪ Adding Materials
2. SolidWorks Sustainability ▪ Adding Sustainability Data to a Custom
Material
▪ SolidWorks Sustainability Overview ▪ Assigning Financial Impact to a Custom
▪ Sustainability Task Pane Views Material
▪ Evaluating the Environmental Impact of a ▪ Updating the Materials Database
Part ▪ Requesting Materials
▪ Selecting a Material ▪ Visualizing Sustainability Properties
▪ Using the Find Similar Material Tool
▪ Setting the Manufacturing Options
▪ Setting Use Options
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Page 37
Course Outline PDM
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Page 41
Course Outline for Composer
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Page 43
Course Outline for Electrical
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
(CONTINUED)
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Page 49
Course Outline for Add-Ins
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
6. Drawing Automation
▪ Automating Drawing Creation
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
1. Inspection Add-in
▪ Overview
▪ Inspection project
▪ Extraction settings
▪ Tolerance settings
▪ Project templates
▪ Characteristic tree
▪ Characteristic properties
▪ Balloon location
▪ Multiple characteristic instances
▪ Multi-line notes
▪ Exporting
▪ Design revision
▪ Manual Ballooning
2. Standalone Application
▪ Overview
▪ User interface
▪ Inspection project
▪ Extracting characteristics
▪ General characteristic tools
▪ Table manager
▪ Managing bill of characteristics
▪ Grids
▪ Multiple drawings
▪ Publishing reports
▪ Drawing revisions
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
1. DimXpert
▪ DimXpert Overview
▪ Auto Dimension Scheme
▪ Datums
▪ Size Dimensions
▪ Location Dimensions
▪ Geometric Tolerances
▪ Tolerance Status
▪ DimXpert Options
▪ Using DimXpert Information in Drawings
▪ Pattern Feature
2. TolAnalyst
▪ TolAnalyst Overview
▪ Establishing the Measurement
▪ Assembly Sequence
▪ Assembly Constraints
▪ Analysing the Results
▪ Fixed/Floating Fasteners
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Lesson 1 Lesson 7
▪ Basic Setup ▪ Form Navigation
▪ Capturing your Models
Lesson 8
Lesson 2
▪ Enhancing your Forms
▪ Project Designer ▪ Dynamic Replacement Files
Lesson 3 Lesson 9
▪ Building Rules ▪ Driving Custom Properties
Lesson 4 Lesson 10
▪ Improving your Project ▪ Documents
Lesson 5 Lesson 11
▪ Static Replacement Files ▪ Drawings
Lesson 6
▪ Tables
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
Lesson 1 Lesson 11
▪ Creating a Group and Capturing Models ▪ Drawings
Lesson 2 Lesson 12
▪ Building a user interface in DriveWorks ▪ Specification flow
Administrator ▪ Preparing your models for automation
Lesson 10
▪ Documents
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
▪ Layer Control - Activate Layer Command 10. Drawing Output and Layout
▪ Color Control Command - LineStyle Control
Command ▪ Drawing Layout – View Tiles
▪ LineWeight Control Command ▪ Working with Viewports on Sheets- Print
▪ Layers Manager Command
▪ Property Painter
▪ Properties Command
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
1. Basic Operations
▪ Basic Manipulations
▪ Extrude
▪ Insert loops
2. Operations (Continued)
▪ Hard Line
▪ Define Boundary
4. Spatial Constrains
▪ Retain Offset Constrain
▪ Retain Ratio Constrain
5. Advance Operations
▪ Advance Manipulations
▪ Thicken
▪ Symmetry
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
4. Information
▪ Part Glue
▪ Print Information
▪ Mechanical Properties
Course Objectives: At the end of the course, the student will know the capabilities of the software and will be able to use the features.
Training Course: Training is held in a laboratory class and each student has their own station.
Methodology: Training is based on case studies demonstrated by the instructor. At the end of each lesson, time will be given for exercises.
Competences Evaluation: During the class work, the instructor will show the exercises and explain the solutions to the entire class.
Instructor: SolidXperts trainers are Certified SolidWorks Instructors (CSWI) and authorized by Emplois Québec.
Course Materials: One or more training manuals are included with the training course (Exceptions apply to teachers and students from educational institutions).
Attestation: A certificate will be given to the student at the end of the course to attest the successful completion of the requirements for the course.
98 Spit Brook Road, Suite #304 2650 Marie Curie Ave. 1173 Charest blvd. West, Suite #350
Nashua, NH 03062 Saint-Laurent, QC, H4S 3C3 Québec, QC, G1N 2C9