Академический Документы
Профессиональный Документы
Культура Документы
Product Advantages
No building thickness
No cracking (zero cracks)
No drainage problems
Perfect shaped lines
Minimum blackening which clears with rain
High retro-reflection almost lifelong
No peeling, no missing parts of paint.
Very low asphalt effect
Excellent adhesion due to its formulation
and the method that is applied (200bar pressure)
Alkali resistant
Appropriate for asphalt and concrete surfaces.
www.gicoman.com
Standards Compliance
GIC RMP 77 complies with the following standards:
EN 1871:2000
EN 1436:2007
Typical properties
Appearance Pastry liquid
Finish Flat
Wet film thickness max 2.2 mm
Solubility Acetone
pH 7.5-8.00
Flash point >30
Specific Gravity Kg/l 1.450 ± 0.050
Solid Content 51%
VOC 31%
(directive 2004/42/CE)
VOC (volatile carbon) 23.91% (258.61 g/l)
Technical Characteristics
Volume solids 34%
Coverage capability CR> 98
Relative consumption 800g/m²
Touch time 20min
VOC One component high
(directive 2004/42/CE) performance coatings
VOC given in l/g in a ready 500g/l
to use condition
VOC of product 465g/l
Technical support
GIC provides a comprehensive technical support services to specifiers, end users, contractors and is able to
offer on-site technical assistance.
Application:
Stir well if needed. The product should be sprayed with airless machine with pressure 180-200bar. In extreme
cases you can use brush or roller (synthetic). Spray pattern should be even all through the width of the line.
For cleaning machinery use Toluene. Do not leave machinery more than 24hrs without cleaning.
Colors
White, Signal Yellow, Matt Black, Grey, Red, Green, Blue, total more than 20 shades based on RAL COLOR
Shades and additionally 3 FLOUROSCENT shades are available.
Coverage
800g/m² of paint but quantity may vary according to the surface and the job.
Packing
GIC RMP 77 is supplied in cans of 5 and 20 liters. Alternatively is available in plastic drums of 200 liters and
1000 liters IBC Tanks
For further information refer to the Material Safety Data Sheet available for this product.
Important note
GIC endeavors to ensure that the technical information contained herein is true, accurate and
represents our best knowledge and experience. No warranty is given or implied as GIC has no Control over the
conditions of use and the competence of any labor involved in application.
As all GIC technical data sheets are updated on a regular basis it is the customer’s responsibility to check
that the product is suitable for the intended application and that the actual conditions of use are in
accordance with those recommended
January 2014
www.gicoman.com