Академический Документы
Профессиональный Документы
Культура Документы
Design
The case consists of a well-dimen-
sioned welded construction and is
provided with a large inspection and A strong shaft is equipped with the Application
assembly flap. In order to avoid adjustable and easily exchangeable ■ For continuous mixing of compound
agglutinations, the mixing chamber mixing tools made of wear-resistant feed with liquids and steam.
lining can consist of synthetic material special cast iron. The shaft runs in ■ For mixing dried beet pulp with
or stainless steel - depending on anti-friction bearings arranged outside molasses – if necessary with
requirement. The inner jacket can be the mixing chamber. The mixer shaft is synthetic lining.
replaced through the assembly flap. balanced dynamically with balancing ■ Generally for moistening granular/
disks arranged in separate chambers. powdery products.
Liquid addition is effected via injection The exceptional silence in operation ■ In general: for (all) mixing tasks
devices, the design of the which results from this design. Subsequent where liquids must be added to
depends on the type of liquids. balancing can be effected locally at solid matters.
any time. Between the mixing and
the balancing chambers the shaft is
provided with special seals.
KAHL Continuous Mixer
Technical data
D E D