0 оценок0% нашли этот документ полезным (0 голосов)
39 просмотров2 страницы
This document provides instructions for installing child restraints in the rear seats of a Chevrolet Cruze. It describes how to use the lower LATCH anchors and top tether anchors to secure the child restraint. The steps are:
1. Attach the lower attachments of the child restraint to the lower LATCH anchors in the rear seat.
2. If recommended by the manufacturer, attach the top tether of the child restraint to the top tether anchor and tighten it according to the instructions.
3. Route the top tether strap either under or over the rear seat head restraint, depending on the seating position and type of restraint.
This document provides instructions for installing child restraints in the rear seats of a Chevrolet Cruze. It describes how to use the lower LATCH anchors and top tether anchors to secure the child restraint. The steps are:
1. Attach the lower attachments of the child restraint to the lower LATCH anchors in the rear seat.
2. If recommended by the manufacturer, attach the top tether of the child restraint to the top tether anchor and tighten it according to the instructions.
3. Route the top tether strap either under or over the rear seat head restraint, depending on the seating position and type of restraint.
This document provides instructions for installing child restraints in the rear seats of a Chevrolet Cruze. It describes how to use the lower LATCH anchors and top tether anchors to secure the child restraint. The steps are:
1. Attach the lower attachments of the child restraint to the lower LATCH anchors in the rear seat.
2. If recommended by the manufacturer, attach the top tether of the child restraint to the top tether anchor and tighten it according to the instructions.
3. Route the top tether strap either under or over the rear seat head restraint, depending on the seating position and type of restraint.
Chevrolet Cruze Owner Manual - 2011 Black plate (51,1)
Seats and Restraints 3-51
This system is designed to make For outboard rear seating
WARNING (Continued) installation of child restraints easier. positions, if the head When using lower anchors, do restraint interferes with the of the retractor to set the lock, not use the vehicle's safety belts. proper installation of the if the vehicle has one, after the Instead use the vehicle's anchors child restraint, the head child restraint has been installed. and child restraint attachments to restraint may be removed. secure the restraints. Some See “Head Restraint Notice: Do not let the LATCH restraints also use another vehicle Removal and attachments rub against the anchor to secure a top tether. Reinstallation” at the vehicle’s safety belts. This may 1. Attach and tighten the end of this section. damage these parts. If necessary, lower attachments to the 1.3. Attach and tighten the lower move buckled safety belts to lower anchors. If the child attachments on the child avoid rubbing the LATCH restraint does not have lower restraint to the lower attachments. attachments or the desired anchors. Do not fold the empty rear seat seating position does not have 2. If the child restraint manufacturer with a safety belt buckled. This lower anchors, secure the child recommends that the top tether could damage the safety belt or restraint with the top tether and be attached, attach and tighten the seat. Unbuckle and return the the safety belts. Refer to the the top tether to the top tether safety belt to its stowed position, child restraint manufacturer anchor. Refer to the child before folding the seat. instructions and the instructions restraint instructions and the in this manual. following steps: If you need to secure more than one child restraint in the rear seat, 1.1. Find the lower anchors for 2.1. Find the top tether anchor. see Where to Put the Restraint on the desired rear outboard page 3‑46 for additional information. seating position. Open the cover to expose the anchor. Make sure to attach the child 1.2. Put the child restraint on restraint at the proper anchor the seat. location. Chevrolet Cruze Owner Manual - 2011 Black plate (52,1)
3-52 Seats and Restraints
2.2. Route, attach, and tighten
the top tether according to the child restraint instructions and the following instructions:
. If you are using a dual . If you are using a single
tether in a rear outboard tether in the center seating seating position with an position without a headrest, adjustable head restraint, or the rear outboard head or in the center seating restraint has been removed, position with an adjustable route the single tether over . If you are using a single headrest, route the dual the seatback. tether in a rear outboard tether around the head seating position with an restraint or headrest. See adjustable head restraint, Head Restraints on or in the center seating page 3‑2 for additional position with an adjustable information. headrest, route the single tether under the head restraint or headrest. See Head Restraints on page 3‑2 for additional information.