Вы находитесь на странице: 1из 7

Djezzy

2G 3G RF Optimisation Center Manager chez VIMPELCOM


Company NameDjezzy
Dates EmployedJan 2015 – Sep 2015 Employment Duration9 mos
• Responsible of the Radio planning and Optimization 2G 3G for the Capital & Center
Wilayas in Algeria (16 Engineers for Huawei, ALU, NSN & ZTE 2400 2G Sites /700 3G
NoneB).
• Manage the team of the Center, and follow up that all network optimization tasks
are executed in an orderly and timely manner, to the required quality, and in line
with project plans and Client requirements.
• Responsible for swap 2G from ALU to Huawei & 3G rollout, including plan of
project installation and acceptance, and management of project resources.
• The Project operation such as daily, weekly and monthly report, complaint
management.
• Manage several project (SON Master Implementation Huawei, Feature test &
parameters Adjustment, 3G/2G HO & reselection strategy).
• Solid knowledge on 2G/3G signaling parameters & feature.

Djezzy
Optimisation Team Leader chez OTA Vimpelcom
Company NameDjezzy
Dates EmployedJan 2011 – Dec 2014 Employment Duration4 yrs
LocationAlger
• Responsible of the Radio planning and Optimization for the Center Wilayas in
Algeria (8 Engineers for ALU, NSN & Huawei, 2000 Sites/11 Wilayas).
• Manage the team of the Center & South Algeria, and follow up that all network
optimization tasks are executed in an orderly and timely manner, to the required
quality, and in line with project plans and CLIENT requirements.
• Check the KPIs and the performance for all cells, and prepare a work plan to the
engineers in order to reach the target KPIs fixed by the Management.
• Planning, following up and achievement of several projects (AFP project with
OPTIMI tool, Redesign project, Swap Huawei Project, Rebalancing GSM/DCS Project,
remove of unnecessary equipment project).
• Check the impact of all actions and trials executed on the network (Frequency-
Tuning, Parameters Tuning, Mechanicals Actions, Ho Delete / Addition, AMR Tuning,
GPRS/EDGE Parameters Tuning).
• Help the engineers to reach their KPIs objective and their daily tasks
• Solve rapidly the problems of the subscriber complaints.
• Make trainings for GSM, GPRS and Edge.

DJEZZY
RF Planning and Optimization Senior Engineer
Company NameDJEZZY
Dates EmployedAug 2005 – Dec 2011 Employment Duration6 yrs 5 mos
Company for GSM
network, Algiers-Algeria.

QoS analysis using the optimization tool (RNO, NPO, SPOTS, M2000 & PRS).
Radio network optimization for all different cells layer types.
Frequency Planning (change frequency, Neighbors audit...).
Make different actions to solve Problems (parameters change, redesign cells, HO
audit and frequency tuning).
Planning new Base stations using Planet (site database).
Supervising & mapping the parameters while upgrading from BR09 to BR10
(Siemens) and B9 to B10 (Alcatel Lucent).
Checking & solving Parameters data base inconsistency for GSM, GPRS & Edge.
Generating Parameters DB for new sites & hardware extension for network Rollout
process.
Handling Site swaps in term of DB parameters Work Orders.
Qvoice and TEMS DT periodically analyzing for the major cities.
Reduce TCH & SDCCH Congestion by using Traffic sharing between neighbor's
cells.
Perform a successful AFP implementation via Optimi Tool on several Town (Djelfa,
Bouira, Aindefla), also I have a good knowledge for ACP of OPTIM tool.
Reporting to the Top management the network behaviors (Traffic voice and data,
KPIs, main problems and solutions).
Analysis the complaints and TQM problems using Drive test (TEMS investigation)
Analysis and investigation several problems: Quality, Interference and Hardware
problem (TRE problems, Low call duration TCH Ass Failure, SDCCH Access failure, BSS
problem) with RNO, NPO M2000.
RMS feature (Radio Measurement Statistic)
Micro cells& concentric cells Parameters tuning.
Addition/Remove TRXs (or Twin) - dual Band Activation.

YACINE IRKAKEN ;:
2G RNP/RNO Engineer
Company NameHuawei Technologies
Dates EmployedSep 2015 – Mar 2017 Employment Duration1 yr 7 mos
LocationAlgérie
• KPI Monitoring and drive test log-file analysis.
• Analyze Drive tests “Black Spots” and made fine-tuning by changing BSS
parameters, tilt, azimuth, frequency, CRO, Frequency Hopping,….etc.
• 2G SSV : Drive test coordinator and reporting
• Using SMartRNO "Huawei Software" to generate the script for SWAP procedure
“Parameters and Neighboring script”.
• 2G/3G Network planning before Power increase and make suggestion for
frequency change and adjust tilt, azimuth to avoid overshooting and degradation of
KPIs, suggest new sites for 3G networks.

Huawei Technologies
LTE RNP/RNO Engineer
Company NameHuawei Technologies
Dates EmployedJun 2014 – Oct 2015 Employment Duration1 yr 5 mos
LocationAlgérie
• Site selection and coverage prediction for TSSR.
• Radio parameters planning “ PCI, Root Sequence...” .
• LTE radio network planning proposal reports for coverage and quality
improvement.
• Redesign of some cells after installing new sites (Tilt ,Azimuth) and make
sure to avoid PCI & PRACH Conflict.
• Neighbors planning.
• Doing Drive Test ,Analysis and propose actions for initial tuning and make
the SSV Report.

LAMYA:
-3G Wilaya Simulation based on 2G existing sites to meet the target coverage
percentage per year(RSCP/ EcIo/HSPA).
-Solution proposal based on target coverage KPI ( Additional sector/Antenna
change/CPICH power/New site)
-Validation of the simulation with the customer.
-Monthly coverage plot based on on-air sites.
-Neighbors and PSC plan of wilaya.
-Updating the 3G engineering parameters Data base.
-Prepare the cluster acceptance report.

ericsson
3G initial tuning
Company NameEricsson
Dates EmployedDec 2016 – Present Employment Duration1 yr 2 mos
LocationAlgeria
• The aim is based on enhancement of main 3G KPIs and improving UTRAN network
performance.
• Accessibility performance analysis (RAB HS, RAB CS, RAB PS, RRC).
• Retain-ability performance analysis (Call drop, Drop HS).
• Mobility performance analysis (SHO, IRAT).
• Analyzing propagation delay to figure out the overshooting cells.
• Check HW, TX issue, VSWR, RSSI,and escalate to the concerned.
• Radio parameter
tuning:primaryCpichPower,qRxLevMin,qQualMin,minPwrMax,minPwrRl ....
• Analyzing WCDMA neighboring cell support (WNCS) to define the missing
relations based on several measurements.
Ericsson
Optimization Engineer 2G
Company NameEricsson
Dates EmployedApr 2014 – Present Employment Duration3 yrs 10 mos
LocationAlgérie
Responsibility :

• Maintaining and improving network performance and quality in terms of main


Radio 2G KPIs and tune the network for a better performance
• Check worst cells list impacting the network performance using business
object tool.
• Accessibility performance analysis (RACH SDCCH).
• Retain-ability performance analysis (TCH drop call, traffic…).
• Mobility performance analysis (Handover).
• Radio parameter tuning :
(Accmin,CRO,RLT,PT,HCSlayer,Hop,CRH,offset,MaxRet,BSPWRB,BSPWRT)
• Analyzing GSM neighboring cell support (NCS) to define the missing relations
based on several measurements.
• Frequency change using FAS and MCOM site to decrease interference issue that
may impact the network quality.
• Check SSV report (serving cells,rx level & quality,C/I and cross issue).
• Able to make some Drive tests whether 2G or 3G using Tems Investigation 15
Ericsson
DT post proccessing 3G (Mobilis initial tuning 3G)
Company NameEricsson
Dates EmployedJan 2014 – Apr 2014 Employment Duration4 mos
LocationAlgérie
Responsibility :

- Measures the quality of networks (RSCP,SQI,Throughput,Handover,IRAT…)


- SSV Test (Single Site Verification): Voice & Video Call, HSDPA, HSUPA, R99 UL&DL
- Drive Test Route (cluster) get the Network performance & behavior for several
sites
- Post processing using Mapinfo, Actix and make Reporting.
- Drive Test Using Tems investigation 15.3,Mapinfo, Actix Reporting
-Check "Message 3 layer" for any issue suspected during the drive test and
coordinate with the integrator to change parameters.
LAMINE AMRANE :
CEM & RAN Optimization Sr. Engineer
Company NameHuawei Technologies
Dates EmployedApr 2016 – Present Employment Duration1 yr 10 mos
LocationAlgeria
 LTE Project Delivery
• LTE cell parameter design and Cluster definition.
• LTE SSV reports generation using Assistant 3.15 & 3.16.
• LTE Cluster reports generation using Assistant 3.15 & 3.16.
• Ping delay issue troubleshooting (DRX, loop duration, scheduling
time,..etc.).
• Low throughput analysis.
• SINR Degrdation troubleshooting.
• Routine Network Audit (Neighboring, TAC, PCI, Interoperability,…etc.).
• CSFB Interworking…etc.
• Daily WCL Analysis and improvement.
• Feature Trial: Flash CSFB, ANR, RACH Optimization, Enhanced Scheduling, …etc.
• Coverage evaluation new built recommendation.
• Traffic and User evolution follow up.
 SmartCare Project Delivery
• Using SEQ Analyst to monitor PS KQIs (Only PS Probes deployed in ATM Network,
CS Probes deployment ongoing).
• communicate with junior- and medium-level customers about technical
solutions, project plans, and progresses; obtain support and acknowledgement from
customers.
• Customer Pain points and high values output and communication.
• KQI degradation route causes analysis and reporting.
• VAP/VAC Analysis and troubleshooting.
• Customer Complaints Handling using SEQ Analyst Platform.
• VIP Real Time Assurance to prevent their complaints and any abnormal behavior
or degradation expericenced by VIP user should be escalated directly before receive
complaints from their side.
• Support 2G/3G/4G User migration strategy.
• Churn prediction and Enhance User Experience of VAP (Very Anoyed Persons) to
reduce the churn rate.
• Special follow and care of the KQIs of the most used Apps (FaceBook,
Instagram, Youtube,…etc.).
Huawei Technologies
3G RNO Engineer
Company NameHuawei Technologies
Dates EmployedSep 2015 – Apr 2016 Employment Duration8 mos
LocationAlgeria
• 3G PAC Acceptance status follow-up and reports delivery (using PRS for OSS
KPI) to customer for validation.
• DT Cluster logs CS/PS analysis (using Actix/TEMS Discovery) and report
preparation for customer validation.
• Licenses check if are correctly configured (TTI 2ms activation, DynCE,
HSDPA/HSUPA, etc…).
• Optimize license usage and remove unneeded ones.
• Hourly/Daily KPI monitoring and WCL analysis after increasing cells power of
the whole network from 20W to 40W.
• RET checking and comparison with engineering data got from RNP team, to
confirm that all changes are request for Optimization actions
• RTWP Analysis by checking TMA activation, RxBranch, external interference,
etc…
• Frequencies configuration alignment (Cell power, CPICH, PSC, Inter and Intra
frequency, etc…).
• 2nd carrier, 3rd carrier, add sector and new sites Work orders creation and
send to NOC Team for execution.
• FACH Congestion on WCL that have high contribution in RNCs degradation.
• CE Usage Based on Max CE usage and CE congestion, find out CE license
addition required and WBBP addition.
• SPU/DPU, WBBP Board usage check.
• Alarms check: Present alarms in new opening area and send to NOC for
cleaning.
• Test new features to enhance more KPIs (DynCE, CE Overbooking, GBR, LDR,
etc…).
• RNC KPI insurance and improvement, WCL analysis and actions execution.
• Q-Voice Benchmarking: analysis & report.
• Coverage and pilot pollution analysis.
• Drive test for customer complaints.
• Skills transfer to customer staffs
Huawei Technologies
2G RNO Team Leader
Company NameHuawei Technologies
Dates EmployedMay 2014 – Sep 2015 Employment Duration1 yr 5 mos
LocationAlgeria

• Responsible for 2G KPIs insurance after Antenna swap for the whole DJEZZY
live network more than 2000 sites.
• Manage RF Swap Team; 8 RNP/RNO Engineers and 4 Rigger.
• Deployment Team interfacing to fix Antenna swap Plan/Priority and Hardware
issues resolution deadline.
• Drive test SSV/Cluster Before/After master plan making and region
dispatching.
• DT Roads definition and validation with customer.
• RF Audit (Antenna Number/Type/Azimuth/Tilts/HBA/TRX/Feeders Status/VSWR…)
Reports preparation and validation.
• Weekly meeting with Customer (Optimization Senior Manager & Project TD) to
confirm KPI Acceptance Progress, discuss team work efficiency and issues.
• Preparing Network Audit (Physical parameter/KPIs) before starting Antenna
Swap for all regions and escalate any abnormal analysis to be considered during
acceptance.
• Hardware problems detection and escalation to Maintenance Team for
intervention.
• Technical support for RF team member to reach agreed target and enhance
HUAWEI business.
• Resolution of customer complaints regarding coverage and poor quality of
services due to swap.
• As needed, provide real-time support to the resolution of major outages.
• Daily and weekly summary reporting and meeting on issues and cleaning
progress.

IMS Group
2G RNO Engineer
Company NameIMS Group
Dates EmployedOct 2013 – May 2014 Employment Duration8 mos
LocationAlgeria
• Hourly/Daily KPI monitoring for swapped sites and actions execution in case of
degradation.
• Difference of antenna beam width and gain analysis and proper actions
proposition.
• Traffic Volume balancing Cells/Sites/Bands.
• Site configuration tuning (Antenna tilting, azimuth, HBA, frequency, audit
Neighbors, power, Rxlev access min, Max TA, etc…).
• RET (Remote Electrical Tilt) Configuration using M2000.
• CR creation and work order follow-up
• Field measurement & external interference scan (if necessary)
• Analyze SSV/Cluster drive test with ACTIX or TEMS DISCORVERY and solve any
problem observed (Cross feeder, Cross Sector, interference, Overshooting)

Youssef Bendiaballah:
Planning Engineer: Advanced skills.
Optimization: Beginer skills.

Working for OTA Algeria project for 3G/LTE planning and network coverage
improvement.
- Neighbors relations plan and audit.
- PSC (3G) and PCI(LTE) planning and audit.
- coverage simulations and enhancement by taking soft or aggressive
mechanical/power actions (LTE /3G)
- Cluster and DT analysis, overlapping with calibrated models simulations. solution
recommendations if needed.
- U900 tuning and neighbors planning.
- RF optimisation as a junior NPO.
- DT team coordination.

Fateh medah :
Professional experience

November 2008 – Now: Huawei 2G/3G Radio Optimization Engineer, working on important
successful projects ,actually now working for OTA BSS SWAP project as RNO engineer
Mars 2011- Now : work for Orascom Telecom Algeria 2G SWAP project , main tasks are:
Discuss with customer about parameter mapping, KPI mapping, KPI acceptance, and SSV
and cluster DT procedure.
Drive test for before and after SWAP for Benchmarking, KPI collection and compare
for before and after SWAP.
Parameter optimization to reach KPI target and improve network quality.

Huawei
Huawei RNO Engineer

Main competence:

Post processing and analysis to isolate and remove any abnormalities in the network
behavior, 2G/3G Drive test data.
Analyzing the SSV and cluster data, preparing SSV and cluster reports,2G/3G Radio
network performance optimization, by performing Adjacency and Frequency Plan
optimization and suggestion, problem reporting and analyzing, contribute on
providing solutions.
LAC/RAC check and suggestion, and fine tuning of parameters in order to reach KPIs.
Audit and consistency check on 2G/3G Parameters.
Fine tuning of specific RF parameters for the sites and clusters to reach optimal
thresholds of KPI’s.
Provide training to subcontractors to improve their performance on SSV and cluster
verification and optimization and troubleshooting.
SSV and cluster management reporting (daily SSV and cluster progress reporting
,distribute subcontractors task, as SSVs, cluster verification and
optimization,throublshoting action execution,…)
3G Huawei radio parameter check and optimization
2G Huawei radio parameters check and optimization
3G RAN Huawei equipments: RNC, NodeB
CDMA planning with GENEX UNET.
Familiar with Optimi xSimulator GSM for QOS prediction.
Familiar with all Huawei Genex software family:GENEX PROBE,GENEX
ASSISTANT,NASTAR(2G/3G),UNET,M2000,PRS,and CME.
Good knowledge on HSPA,HSPA+,HSPA MIMO technologies.

Radio Network Planning Engineer


Company NameWataniya Télécom Algérie
Dates EmployedJun 2013 – Present Employment Duration4 yrs 9 mos
LocationAlgiers
- Radio Frequency Planning and Optimization: managing projects of frequency
planning, retuning and reframing under EFO “Ex-xAFP” tool.
- New sites integration parameters preparation: new RF and Neighboring plan.
- Radio planning for new sites: making simulations with Atoll to establish new
nominal plan, site survey, ranking according to radio objectives proposed
candidates for each nominal site.
- Deployment follow-up and selection of sites to be on air according to yearly
objectives.
- Radio capacity monitoring and dimensioning: following of traffic behavior and
taking actions for network growth and expansion for E/// equipment.
- Swap BSC, and new BSC design.
- Basic Radio Network Optimization: following network KPIs and signaling any issue
affecting the performance of the network.
- Drive test analysis.
- 3G sites planning and integration CDD preparation.
- Create & develop many macros to facilitate my daily tasks.
- Atoll database administrator and keeping the database updated.

Вам также может понравиться