Академический Документы
Профессиональный Документы
Культура Документы
Copper
Mechanical Properties
Alloy Temper Tensile Strength Yield Strength Elongation Vickers Hardness
Rm Rp 0.2 A50mm
(N/mm2) (N/mm2) (% min.)
Copper
Physical Properties
Density Coefficient of Electrical Electrical Thermal Modulus of Weldability Solderability Season
(g/cm3) Thermal Expan- Conductivity Conductivity Conductivity Elasticity Cracking
sion (10-6 K-1) (MS/m=m/Ωmm2) (% IACS) (W/mK) (kN/mm2)
8.9 17.7 57-58 98.3-100 385 130 very good very good no
8.9 17.7 41-52 70.7-90 293-364 132 very good very good no
Fe 2.1-2.6/Zn 0.05-0.2/ CW107C C19400 DIN 17670-1 Leadframes, contacts, switches, break-line pipes
P max. 0.15/Cu Rest
Ni 8.5-10.5*/Sn 1.8-2.8/Cu Rest CW351H C72500 DIN 17670-1 Contact springs, connectors, soldering tags
Cu 60-63/Ni 17-19/Zn Rest CW409J C76400 DIN 17670-1 Contact springs, spectacle parts, zipper parts, metal ware,
BS Alloy NS 106 cutlery
* Ni contains 0.5 % Co
Copper
Chemical Composition Applications
Chemical EN USA Earlier Standards
Composition UNS Alloy-No.
(%)
Cu 99.9/O=0.005-0.04 CW004/A C110 DIN 40500-3 Components for the electrical industry, connectors, tabs
BS Alloy C101
Cu 99.9/P≈0.003 CR020A C103 DIN 40500-3 Electrical devices, switching elements, connectors, tabs
free of oxygen, BS Alloy C103
with phosphor oxide
Sheets
Thickness: 0.2 – 2 mm
Width: max. 300 mm
Length: max. 2,000 mm
other dimensions upon request
Coils
up to 7.5 kg/mm width
other dimensions upon request
Traverse winding
on cores
on drums
(depending on strip cross section
and type, up to max. 1,500 kg
drum weight)
Order quantities
300 kg (or multiple)
other quantities upon request
Surface
oiled
oil-free
passivated
Profiled
according to your drawings
Surface plating
Hot dip tinning
Electric tinning
Partially plated
Gold, Silver, Nickel plating
Liability
The details in this brochure are exclusively meant for general information only. They correspond to the state of knowledge at the time
of issue and cannot replace the examination by our customers. Liability cannot be derived from the information.
QMF 348 Ed. 06/01
Gebr. Kemper GmbH + Co. KG, Metallwerke P. O. Box 15 20, D-57445 Olpe
Quality is our standard Phone ++49 (0) 27 61 8 91-1 24, Fax ++49 (0) 27 61 8 91-2 02, Internet: www.kemper-olpe.de
since 1864
E-Mail: Sales Department: pbroecher@kemper-olpe.de, Technical Support: vtietz@kemper-olpe.de