Академический Документы
Профессиональный Документы
Культура Документы
(311.2 mm)
Application D Technology PDC bits are the proven solution for the
ever increasing commplexity of directional applications and operators
tougher performance objectives. In motor steerable, rotary steerable and
vertical drilling applications our technology enhancements offer
superior performance and directional control.
LGC Gauge Design The bit's gauge design is optimized for the
application to match the drive system, dog-leg requirements and
formation characteristics. LGC (Length, Geometry and Cutting
structure) gauge design approach delivers predictable and consistent
build rates without compromising hole quality.
Product Specifications
IADC: M323
Number of Blades: 5
Cutter Quantity (Total, Face): 63, 33
Primary Cutter Size .75 in (19.0 mm)
Number of Nozzles: 7
Nozzle Type: SP
Fixed TFA 0 in² (0.0 mm²)
Gauge Length 2 in (50.8 mm)
Junk Slot Area 33.1 in² (213.4 cm²)
Bit Breaker: 123210007,123215860,123210008
Connection: 6-5/8 API REG
Makeup Torque:
7 1/2" + Bit Sub 37.1 - 42.4 kft-lb (50.3 - 57.5 kNm)
Reference Part Number: N19757
Status: M
Operating Recommendations*:
Hydraulic Flow Rate: 550 - 1200 gpm (2100 - 4550 lpm)
Rotation Speed: For Rotary, Motor, and Rotary
Steerable Applications
Max. Weight On Bit: 40 klb (18 tn or kdaN)
*The ranges of bit weight and RPM shown are representative of typical operating
parameters, but will not necessarily yield optimum bit life or lowest drilling cost. It is www.bakerhughes.com
not recommended that the upper limits of both weight and RPM be run simultaneously. © 2012 Baker Hughes Incorporated. All rights reserved.
Contact your local Hughes Christensen representative for recommendations in your area.
bhiTrackPage("Bit","Bit Stylesheet"); %>