Академический Документы
Профессиональный Документы
Культура Документы
Lesson Plan
I. OBJECTIVES:
At the end of one-hour lesson, the students are expected to:
1. Define the usage of tools for repairing computers;
2. Innumerate the types of hand tools.
3. Identify the different types of hand tools used in computer hardware servicing
4. Value the importance of following safety precaution while working.
III. PROCEDURE:
A. Preliminary Activities
1. Prayer
2. Greetings
3. Checking of the Attendance
4. Unlocking of Difficulties
What are the meanings of the following?
a. ESD (Electrostatic discharge)- is the sudden flow of electricity
between two electrically charged objects caused by contact, an
electrical short, or dielectric breakdown. A buildup of static
electricity can be caused by turbo charging or by electrostatic
induction.
b. Torx- developed in 1967 by Camcar Textron, is the trademark for a
type of screw head characterized by a 6-point star-shaped pattern.
A popular generic name for the drive is star, as in star screwdriver or
star bits
c. Lint free cloth- is a special type of cleaning cloth that does not give
up any fluff when used. Being free of lint means the cloth is less
likely to build up a charge. Which can caused ESD; damaging
electronic equipment like HD television, computer monitors and
digital cameras.
5. Motivation:
Show pictures of tools and ask the student if they want to know how it
works. Use Picture equation to reveal the topic for the day.
B. Developmental Activities:
1. Activity:
a. Provide pre-test for basic hand tools
b. Student will list down the types of Hand tools according to the
usage.
Preliminary Activity: Pre-Test
Direction: Select the letter of the correct answer. Write your answers on a separate
sheet of paper.
1. Which tool is used for hardware to stand on to prevent static electricity from building
up?
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same
5. Which tool is used to retrieve parts from location that are too small for your hand to
fit?
7. Which tool is used to bundle cables neatly inside and outside of a computer?
9. Which tool is used to loosen or tighten screws that have a star-like depression on the
top, a feature that is mainly found on laptop?
10. Which tool is used to blow away dust and debris from different computer parts
without touching the components?
2. Analysis
What will happen if we use improper hand tools?
What could be possible output if we used proper hand tools?
3. Abstraction
Ask the following question:
1) What have you learned from our topic?
2) Why do we need to identify the purpose of the basic usage of
the hand tools? What could be the problem that will occur, if
we used improper hand tools?
3) 4 Categories of hardware tools:
Electo-Static Discharge (ESD) tools
Hand tools
Cleaning Tools
Diagnostic Tools
4. Application
Identify the basic hand tools and provide the purpose in using the
tools?
IV. EVALUATION:
Task 1: Clean it up!!
Direction: Complete the computer cleaning chart shown below. Indicate the
appropriate tools to be used in cleaning the different computer components.
COMPUTER MAINTENANCE
Computer case
Mouse
Keyboard
Monitor
Speaker
Cooling fan
Heat sink
Direction: Use the appropriate tools to do each of the following tasks. Safety
precautions must be observed while working.
Directions: Name the tools presented below. Write your answers on the space provided
before each tool.
1. 8.
2. 9.
3. 10.
4. 11.
5. 12.
6. 13.
7. 14.
Directions: Using the different available tools in the laboratory, you will segregate the tools according to
their classification whether it is an ESD tool, Hand tool, cleaning tool or a diagnostic tool. You will be
rated according to the scoring rubric below:
Classification of Tools
Scoring Rubrics
Criteria Score
20- 22 10
15- 19 8
10- 14 6
5-9 4
1-4 2
V. Assignment:
Write an example of Equipment in computer hardware servicing.