Академический Документы
Профессиональный Документы
Культура Документы
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
PROJECT PARTICULARS
Project Proposed
Location of Project
Address of Project: Near chakaur park, Nimanwasa, Maksi road industrial area,
Dist. Ujjain, M. P.
Capacity Proposed
Average Revenue
Rupees Seventy Nine Lac Fifty One Thousand Seven Hundred Ninety Four Only per
annum (Rs 79, 51, 794/-).
Proposed Building
1
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
Engineers – 2
Welder – 1
Fitter – 1
Painter – 1
Helper – 1
2
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
Motor – 3
Spindle Drive – 1
Controller – 1
Vice – 1
Spindle – 1
Tools – NA
Paint – NA
3
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
LOAN REQUIREMENTS
Amount of Loan proposed
Amount Proposed: Rs Twenty Four Lac Fifty Five Thousand Only (Rs 24, 55, 000/-)
The loan is under the scheme of PMEGP approved by District Industries Center
(DIC), Dist. Ujjain (M. P.)
Interest Rate
Interest at the rate of 13.5 % per annum (as per the bank guideline)
4
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
Market Challengers
Hyt Engineering Company Pvt. Ltd. – 29/10, D-2 Block, Midc, Chinchwad, Pune.
Jyoti Engineering Works – Green Land Chokdi, Ahmedabad Highway, Behind Anand
Auto Mobiles, Rajkot.
Macpower CNC Machines Pvt. Ltd. – Plot No: 2234, Kranti Gate, Lodhika GIDC,
Metoda, Rajkot.
Market Scope
Arpit Plastics Pvt. Limited. 14-C, E, 15-A, Industrial Area, Maksi Road, Ujjain.
B. L. Engineering, Plot No. 16 G, Nr Chakaur Park, Industrial Area, Maksi Rd, Ujjain.
Shivam Water Treaters Pvt. Ltd., Bharat Cement Pipe Compound, Near PWD Store,
Narol Cross Road, Narol, Ahmedabad.
Suppliers
Lubi electronics – Sardar Patel Ring Road, Near P T C Collage, Near P T C Collage,
Nana Chiloda, Gandhinagar, Gujrat.
Arun Automation – 112/1, 3rd Floor Langford Raod Minerva Circle, Langford Street,
Bangalore, Karnataka.
Adtech (Shenzhen) CNC Technology Co., Ltd – 36th Building, Ma Jialong Industrial
Park, Nanshan, City: Shenzhen, Guangdong, China (Mainland) – 518052.
Bob CAD-CAM Inc., 28200 U.S. Highway 19 North, Suite E, Clearwater, Florida, US
– 33761.
5
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
SYNOPSIS
A milling machine is a tool used for machining solid materials (including wood, acrylic,
aluminium, steel, etc). A conventional milling machine move the work piece radially against the
rotating milling cutter, which cuts on its sides as well as on its tip. Work piece and cutter
movement are precisely controlled to less than 0.001 in (0.025 mm), usually by means of
precision ground slides and lead screws or analogous technology. Milling machines may be
manually operated, mechanically automated, or digitally automated via Computer Numerical
Control (CNC).
Actually the term CNC originated from its parent NC. NC (Numerical Control) refers
to the automation of machine tools that are operated by abstractly programmed commands
encoded on a storage medium instead of manually controlled via hand wheels or levers, or
mechanically automated via cams alone. Later, the NC machines used motors that moved the
controls to follow points fed into the system on punched tape. These early servomechanisms
were rapidly augmented with analog and digital computers, creating the modern Computer
Numerical Control (CNC) machine tools that have revolutionized the machining processes.
The CNC Milling Machine or sometimes referred to as machining center is a highly
accurate form of milling. It allows the part to be engineered to a high level of complexity such as
engraved elements and relief. The precision achieved is unsurpassed and with little operator
input needed following the set up phase and the production of the test piece it's also cost
effective. A milling machine is an essential tool room machine designed to produce a very
accurate work.
In a CNC system, end-to-end component design is highly automated using Computer
Aided Design (CAD) and Computer Aided Manufacturing (CAM) programs. The programs
produce a computer file that is interpreted to extract the commands needed to operate a particular
machine via a Postprocessor, and then loaded into the CNC machines for production. Since any
particular component might require the use of a number of different tools, i.e. drills, saws, etc., it
may often combine multiple tools into a single "cell". In other cases, a number of different
machines are used with an external controller and human or robotic operators that move the
component from machine to machine. In either case, the complex series of steps are needed to
produce any part that closely matches the original CAD design.
6
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
PROJECT DETAIL
The project is an innovative step in manufacturing a CNC Milling machine. Hence it is a
step to decrease the workers fatigue and increases precision. The machine may be classified
under the category of omniversal milling machine. The CNC milling machine is being equipped
with all the three axis motion in tool hence the work-piece will be placed on the work table and
tool will perform all the operations as of omniversal milling.
Thus the operations which could be performed includes machining slots, grooves,
keyways, spur, helical, bevel gears, twist drills, reamers, taper spiral grooves in reamers,
contouring, milling cutters and all types of milling, drilling and shaping operations.
Machine manufacturing time (including transportation + erection-commissioning + trial
run + technical guidance) will be 25 days.
Money back time will be 30 days, after the collection of satisfactory certificate.
Major applications of machine are as under:
Repetitive type of work.
Reduction in production time.
Market Scope of CNC milling machine: As like all the government, private and semi-
government offices of all types has been switched to computers rather than working manually.
Similar industrial machinery revolution is about to come. The market of a milling m/c has very
wide range. Though, it is broadly classified in 5 categories as under:
The first and foremost market is all the technical institutes which have Mechanical,
Automobile, Marine or similar branches.
Secondly, all the emerging industries with high goals.
Thirdly, all the industries which are planning to upgrade their machineries.
All the places where precision are one of the scales to measure finished goods.
All the industries who want to increase their production rate.
The above points can be elaborated and they cover almost all the technical industries (no
matter micro, small, medium or large scale). Also, it is not a matter of consideration whether the
7
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771
industry is similar to a maintenance workshop for a giant one or giant itself. The requirement of
CNC milling in this fast-furious world of precision and accuracy is at every above level.
8
AUTOZ ENGINEERING
NEAR CHAKAUR PARK, NIMANWASA, INDUSTRIAL AREA, MAKSI ROAD, DIST. UJJAIN, MADHYA PRADESH
EMAIL: shahidss8@rediffmail.com PH NO.: 91-9993128771