Академический Документы
Профессиональный Документы
Культура Документы
Pressure Controls
Style C External Bellows - Copper Alloy
O Copper alloy bellows may be used on water or air, and other liquids or gases not corrosive to this alloy.
@ For applications where settings approach 0 psi, select a control that has an adjustable range that goes into vacuum.
© Transients (pulses) can occur in a system prior to reaching a steady-state condition. Surge pressures within published values generated
during start-up or shut-down of a machine or system, not exceeding 8 times in a 24 hour period, are negligible.
O With 3/8" N.P.S.F. female pipe connection.
© To determine differential in inches of mercury vacuum multiply valve in table by 2.036 (or approximately 2).
0) The combined Type 7&9 and 4&13 Hazardous Gas and Dust service enclosure is supplied with special gasket and O-ring seal to
diminish/exclude moisture, fluids, and dust from entering the enclosure. Enclosures rated 7&9 only are not designed to restrict moisture from
entering the enclosure, which is common to outdoor service.
Ordering Modifications
Modifications are ordered by adding the appropriate modification suffix code to the catalog number of the basic device. Add suffix
codes to the catalog number in descending order (highest number first).
Modifications
Contact Blocks O
3*
O
contact with no snap action. Contacts Control Circuit Rating:
X171 ©
close on rise and close on fall with an AC-125VA, 24 to 250V
open circuit between contact closures.
0-^0
Single pole single throw, normally .5 HP., 115V AC
1 H.P., 230V AC X221 0
open — closes on rise.
Control Circuit Rating:
AC-125VA, 24-1 10V ^
o—r—o
Single pole single throw, normally AC-345VA, 110-600V X231 ©
closed — opens on rise. DC-57.5VA, 110-250V
^
o-~_^_o
Single pole single throw, normally
open — closes on rise.
1 H.P., 115V AC
1.5 HP., 230V AC
Control Circuit Rating:
A X321 0
O T O
Single pole single throw, normally AC-600VA, 110-600V
DC-57.5VA, 110-250V X331 ©
closed — opens on rise. £_^
Two circuit, single pole single throw,
~r
oo
normally open — a common terminal is Non-inductive: X021 ©
connected to two separate contacts 5A, 240V — 3A, 600V
which close on rise. Control Circuit Rating:
Two circuit, single pole single throw, AC-125VA, 24 to 600V
normally closed — a common terminal DC-57.5VA, 115 to O iij u
230V X031 ©
is connected to two separate contacts
which open on rise. £_^
External Manual Reset (Not available in Type 7 & 9 Enclosures) ©O
Single pole single throw, normally
open — contacts open at a predeter-
^-p-S
mined setting on fall and remain open
X 140 00©
until system is restored to normal run £-±
conditions at which time contacts can
be manually reset.
Single pole single throw, normally Non-inductive:
closed — contacts open on rise and re- 5A, 240V O 1—O
main open until system is restored to 3A, 600V X150©O©
Control Circuit Rating:
normal run conditions at which time AC-125VA, 24 to 600V
contacts can be manually reset. DC-57.5VA, 115 to
^
Single pole double throw, one contact 230V
normally closed — contact opens on
rise and remains open until system is
restored to normal run condition at
which time contact can be manually re-
set. A second contact closes when the
•2?
X15A©O©
Modifications
Oxygen / Nitrous Oxide Service
Description Suffix Code
*
Bellows and fittings are specially prepared for oxygen and nitrous oxide service. The de-
vices are tested with pure oxygen, bellows are plugged for protection from contamination, X2
and a warning tag is applied to avert contamination.
Factory Options
Factory Set Pressure Controls Two Style A Controls In One
Ordering Factory Set Pressure Controls. Quality analog "Test"© gauges are used Enclosure
• When a specific differential is unimpor- when applying requested factory settings Bulletin 836 Style pressure controls which
tant, and the approximate inherent to these rugged industrial grade pressure function independently may be mounted
minimum differential satisfies the ap- controls. (Gauges are calibrated and the side by side in a single Type 1 enclosure.
plication, specify the factory setting as accuracy is traceable to National Bureau This design is ideal for installations where
follows: of Standards.) The actual requested set- two controls would ordinarily be mounted.
ting is applied to the control by reading the Each dual unit can be a combination of a
set point directly from the test gauge being Style A pressure control and a bulb and
Ref: Set to open at O increasing used. However, traceable gauge toler- capillary type temperature control. See re-
pressure. Minimum differential. ance variance between source and user, spective product tables.
and possible severe shock during ship-
ping and installation, may contribute to the To order this arrangement, specify the two
-OR- desired catalog numbers in their mounted
factory settings deviating slightly from the
specified values. Slight recalibration can position within the dual enclosure to form
Ref: Set to close at O decreasing
easily be accomplished upon final installa- a single catalog number. The list price is
pressure. Minimum differential.
tion to meet specific requirements for the the sum of the two Type 1 enclosed de-
more demanding applications. When vices.
installed, the controls will perform with a For more information and pricing of spe-
• When a specific differential is required, repeat accuracy as established in the
specify factory settings as follows: cial controls, consult your Master Price
paragraph on page 15-5 entitled Repeat List or nearest Allen-Bradley Sales Office.
Accuracy and Mechanical Life. Special
Ref: Set to open at O service is available to factory set controls
Close at O . on Digital Laboratory Instruments, up to
600 psi, when required for the more critical
For pricing consult your Master Price List applications. An additional charge may be
or your nearest Allen-Bradley Sales Office. added for this service contingent upon set-
ting tolerance and quantity. Consult your
nearest Allen-Bradley Sales Office.
UL CSA
File Number Guide Number File Number Class
Bulletin 836 E 14842 (NKPZ2) LR1234 1222-01
E53048 (Haz. Loc.) NKPZ LR11924(Haz. Loc.) 3211-03
NOWT 3218-02
Hazardous Location Enclosure not CE compliant.
O Specify psi (pounds per square inch) or, in Hg Vac. (inches of mercury vacuum).
@ Per ANSI B40.1 Grade 2A (0.5% accuracy full scale), Grade 3A (0.25% accuracy full scale), etc.
Allen-Bradley 15-15
Bulletin 836
Pressure Controls
Technical Data
15-6 Mien-Bradley
Bulletin 836
Pressure Controls
Product Overview
Description
Bulletin 836 Pressure Controls are de- Allen-Bradley Bulletin 836 Pressure Con- to meet most control circuit requirements.
signed for general industrial use to control trols are used in many types of industries The controls have adjustable pressure
and detect pressure. Allen-Bradley Bulle- and applications. They can be used to ranges from 30" mercury vacuum to 900
tin 836 Pressure Controls can be used in control pneumatic systems, maintaining psi with corresponding differentials. Ac-
pneumatic and hydraulic systems. Pres- preset pressures between two values. cessories and modifications are available
sure controls use copper alloy or stainless Pressure controls can be used to detect to tailor the device to meet most applica-
steel bellows. The design and high quality over-pressures of gases or liquids to pro- tion requirements.
components provide long life operation tect machines, processes, and personnel.
with air, water, oil, non-corrosive liquids, They can also be used to detect low pres- Applications
vapors, gases, and some corrosive liquids sures to protect equipment from loss of • Air Compressors
or gases. Pressure controls feature snap coolants and lubrication.
• Compressed Air Monitor Systems
action precision switches equipped with
silver contacts. The straight in-line and rel- Bulletin 836 Pressure Controls are offered • Liquid Level Control
atively friction-free construction provides in a variety of styles to meet a wide range
of applications. The devices are available • Vacuum Transfer Systems
accurate and consistent operation regard-
less of the angle at which the controls are in Type 1,4 & 13,4X, 7 & 9 and 4 & 13 com- • High Pressure Alert
mounted. Pressure controls are designed bined and Open Type without enclosure • Low Pressure Alert
for easy adjustment of both trip and reset for panel mounting. Pressure controls
have a wide variety of contact modifications • Monitor Low and High Pressure
pressures.
Style A — Small Size, Internal Copper Alloy Bellows
Style A
• Independently adjustable range and differential
• 7/16" - 20 SAE flare for 1/4" copper connection tubing
• Adjustable Operating Range - 30" mercury vacuum to 375 psi
• Maximum Line Pressure - 750 psi
• Occasional Surge Pressure - 850 psi
15-2 Allen-Bradley
Bulletin 836
Pressure Controls
Dimension Drawings — Style C
Open Type O
Approximate Shipping Weight 2 Ibs. (.91 kg)
V4-18N.P.T.F.
1k
t
' t ^
\ 1.38
(34.S )
£of 0.88
44 3 8.6 3
(117 .5)
(22.2) ~T (21! .1) 10 25
Dia.
Holes ' (26 3.4)
1 75 / 1
(44.4) I1 i , ^ ^
oj ^n
1I!
-1
to I( E A] Lrtt J
2.69
(68.3)
,
r LJ tr»- i —\\ / J
.
1
*- (34.1)
1.34
"
•* -«
^ >•
1.: 8 1. 28 \ /
;• 7 2 ^ ^
— fc-
1.88
(32 5) (32 -5) (e 9-1)5, 4 4 .2
s(47.6)
-« »- -«
(131 •2) d0 1
V.-1 8 N.P.T. F
Type 1 O Type 7S9and4S 13
Approximate Shipping Weight 2-1/2 Ibs. (1.1 kg) Approximate Shipping Weight 10 Ibs. (4.5 kg)
1.31 / 1.5
(38.1)
1.5
(95.2)
;
/ r (17.5)
(33.3) r (38.1) |
'
i /
£of 0.75-14
(19.2)
'
,
/C 5
f t
0.66
(16.7)
t
7.38
I N.P.T.F.
7.56 r 6 25 (187.3)
(192.1) (158.8) 8.
(22
y
^BIf
, i J
r
^ V 1
' •vL 3£
1.63
"(41.3)
T T
(42.1)
1 (4)-0.2 (5.2) Dia.
Mtg. Holes
«-2.56 »
(65.1)
\ V4-18 M.P.T.F,
! 0.38
(9.5)
2.06
(52.4)
V4-18 N.P.T.F.
Type 4X
Type 4 <S 13
Approximate Shipping Weight 6 Ibs. (2.7 kg)
Approximate Shipping Weight 5 Ibs. (2.3 kg)
O Catalog Numbers 836-C1 and 836-C1A require a 2 inch swing radius from centerline of pressure connection. Mount control on 7/8 inch
minimum spacers.
Note: N.P.T.F. - American Standard Taper Pipe Thread (Dryseal).
15-20 Allen-Bradley
NEMA Enclosures
Important
Type 1 enclosures are intended for indoor use primarily to provide a Type 3R enclosures are intended for outdoor use primarily to provide
degree of protection against contact with the enclosed equipment in a degree of protection against falling rain, and to be undamaged by
locations where unusual service conditions do not exist. The the formation of ice on the enclosure. They are designed to meet rod
enclosures are designed to meet the rod entry and rust-resistance entry, rain ➌, external icing ➋, and rust-resistance design tests. They
design tests. Enclosure is sheet steel, treated to resist corrosion. are not intended to provide protection against conditions such as dust,
internal condensation, or internal icing.
Type 1 Type 4
Flush Mounting Watertight
Stainless Steel
Important-8