Академический Документы
Профессиональный Документы
Культура Документы
Filter Cartridges
• air / gas filters
• expanded PTFE
Performance Characteristics
1000 700
14 10
900
9
Differential Pressure (mbar)
600
12
Differential Pressure (psi)
800 0 barg
8
0 barg 500
700 10 7
600 6
8 400
500 5
6 300
400 4
2 barg 2 barg
300 4 200 3
200 2
2 100
100 1
0 0 0 0
0 100 200 300 400 500 600 700 0 20 40 60 80 100 120 140 160 180
Flow (Nm / hr) (air @ 21 °C)
3
Flow (Nm / hr) (air @ 21 °C)
3
Flow rates for other sizes available upon request Flow rates for other sizes available upon request
Specifications
Materials of Construction HIGH FLOW TETPOR II cartridges can be Integrity Test Data
Filtration Membrane: Expanded PTFE in situ steam sterilized for up to 225 cycles All cartridges are integrity tested prior to
Upstream Support: Polypropylene at 142 °C (287.6 °F). despatch by the pressure decay and aerosol
Downstream Support: Polypropylene challenge test methods. Values are for
Inner Support Core: 316L Stainless Steel Retention Characteristics cartridges wetted with 60 / 40 IPA / Water.
Outer Protection Cage: Polypropylene HIGH FLOW TETPOR II cartridges have been Cartridge Test Diffusional Water Water Water
End Caps: Polypropylene fully validated as 0.2 micron sterilizing grade
Pressure Flow Intrusion Intrusion Flow
Test Pressure
End Cap Insert: Polysulphone filter cartridges, for compressed air and gas (bar) (psi) (ml / min) (barg) (psig) (ml / 10 min) (µl / 10 min)
Standard o-rings: Silicone applications. They exceed liquid bacterial D 0.8 11.6 0.6 2.5 36.2 N / A N/A
challenge levels as recommended by ASTM+. C 0.8 11.6 1.1 2.5 36.2 N / A N/A
Food and Biological Safety In addition, HIGH FLOW TETPOR II is also B 0.8 11.6 2.8 2.5 36.2 2.3 657
A 0.8 11.6 5.6 2.5 36.2 4.6 1314
Materials conform to the relevant validated by aerosol bacterial and
K 0.8 11.6 7.70 2.5 36.2 6.4 1828
requirements of 21CFR Part 177, MS-2 Coliphage challenge testing.
10¨ 0.8 11.6 16.50 2.5 36.2 13.5 3857
EC1935 / 2004 and current USP Plastics +ASTM American Society for Testing and Materials
20¨ 0.8 11.6 33.00 2.5 36.2 27.0 7714
Class VI - 121 °C and ISO10993 equivalents. 30¨ 0.8 11.6 49.50 2.5 36.2 40.5 11571
Ordering Information
ZHFT / -
DS_GF_07_01/12 Rev. 4B