Академический Документы
Профессиональный Документы
Культура Документы
Tig
When TIG welding austenitic stainless steel pipe, argon gas backing is called for. This is to:
a. Prevent oxidation
b. Prevent underbead cracking
c. Prevent porosity
d. Control the penetration bead shape
. Inherent rectification of the electrical output is produced in the arc when TIG welding using:
a. AC with a suppressor
b. AC without a suppressor
c. DC with reverse polarity
d. DC with straight polarity
Which defect would you expect to get in TIG welds in non-deoxidised steel?
a. Undercut.
b. Porosity.
c. Tungsten inclusions.
d. Linear misalignment.
Argon purging on the root side is necessary in the TIG welding of stainless steel to:
a. Obtain full penetration.
b. Obtain full fusion.
c. Avoid porosity in the root.
d. Obtain a satisfactory weld surface finish.
When TIG welding austenitic stainless steel pipe, argon gas backing is called for. This is to:
a. Prevent oxidation
b. Prevent underbead cracking
c. Prevent porosity
d. Control the penetration bead shape
MIG