Академический Документы
Профессиональный Документы
Культура Документы
Page 1
SingleVario 2061
Section
Dimensions
80 50 45
Product Data
Car data Free space
SingleVario CONFORMITY
Page 2 le
Free space Loadab 0 kg
2061
50
Width 0
to 2,5
80
dimesions up
m for
A syste ight !
any h e table
ly adjus
Page 3
nt
Height (H) 3
eque
subs
Approach
Load plan Dimensions:
Installation Cutting through 1 All space requirements are minimum
finished dimensions. Tolerances for space
Delimitation 5
Clear height
requirements +30 . Dimensions in cm.
210
Page 4
(DH)
Electrical EB (single platform) = 2 vehicles
150
installation
Technical
Type H DH**
data
2061-160 320 160
Page 5
To be perfor-
2061-170* 330 170
med by the Grounding 4 Steel pillar base 6
customer 2061-180 340 180
520 (for vehicle up to 5.00 m = 16’4’’ long)
Description
»540 (for vehicle up to 5.20 m 17’ long)« 2061-190 350 190
Before lowering the platform, the vehicle parked in the lower parking space 2061-200 360 200
must be driven off!
2061-210 370 210
80 50 45
Free space * = standard type ** = without car
Suitable for:
Standard passenger car,
station wagon/Van/SUV.
Free space
50
140
1 For dividing walls: cutting through
100
A1 2 92
Free space 10 x 10 cm (for pipes).
15° 13°
for door 6°
2 Dimensions A1, A2 and A3 must be 95 125
500 <520>
coordinated with the door supplier.
Standard station wagon/Van/SUV
3 If the total height is greater, the max.
80
160 30
vehicle height for the upper parking
space increases accordingly.
see table
4
105
to the edge of the platform in the access without any sports options such as
area to mark the danger zone in front of spoilers, low-profile tyres etc.
the supporting surface of the upper
platform edge (see »Load Plan«, Page 3)
6 Variable steel pillar bases in two sizes
(see »Load Plan«, Page 3).
7 Maximum load of 2,500 kg for extra
charge.
Klaus Multiparking GmbH
Hermann-Krum-Straße 2
D-88319 Aitrach
Phone +49-75 65-5 08-0
Fax +49-75 65-5 08-88
E-Mail info@multiparking.com
Internet www.multiparking.com
SingleVario 2061 | Code number 584.69.890 | Version 01.2008 Page 2 of 5
Page 1
Width for basement garage
Section
Dimensions Dividing walls
Car data
Single Platform (EB) Double arrangement (2 x EB) Tripple arrangement (3 x EB)
Page 2
Width
dimesions
EB EB EB EB EB EB
Page 3
Approach B1 B1 B1 Carriageway in
accordance with
Load plan local regulations
usable platform width B1 usable platform width B1 usable platform width B1
Installation
230 * 260 230 * 520 230 * 780
240 270 240 540 240 810
Page 4 250 280 250 560 250 840
Electrical 260 290 260 580 260 870
installation 270 300 270 600 270 900
Technical
data
Columns in system zone
Page 5 Single Platform (EB) Double arrangement (2 x EB) Tripple arrangement (3 x EB)
To be perfor-
max.
max.
max.
med by the
140
140
140
customer
Description
EB EB EB EB EB EB EB EB EB EB EB EB
max.
max.
max.
140
140
140
B2 B3 min. 20 B2 B3 min. 20 B2 B3 min. 20
Carriageway in
accordance with
usable platform width B2 B3 usable platform width B2 B3 usable platform width B2 B3 local regulations
230 * 255 250 230 * 515 510 230 * 775 770
240 265 260 240 535 530 240 805 800
250 275 270 250 555 550 250 835 830
260 285 280 260 575 570 260 865 860
270 295 290 270 595 590 270 895 890
EB EB EB EB EB EB EB EB EB EB EB EB
Allround door
A3
dimensions require
coordination between
L L L S S door supplier and L L L S S
DF DF DF local agency of DF DF DF
Klaus Multiparking.
Carriageway in
accordance with
usable platform width door entrance width DF L S usable platform width door entrance width DF L S local regulations
230 * 2375 125 25 230 * 475 225 45
240 250 125 25 240 500 20 40
250 250 15 30 250 520 1 20 40
260 260 15 30 260 540 1 20 40
270 270 15 30 270 560 1 20 40
* = standard width (parking space width 2.30 m) 1 = no standard width for doors!
Please note:
End parking spaces are generally more difficult to drive into. Therefore we recommended for end parking spaces our wider platforms.
Parking on standard width platforms with larger vehicles may make getting into and out of the vehicle difficult. This depends on type
of vehicle, approach and above all on the individual driver’s skill.
SingleVario 2061 | Code number 584.69.890 | Version 01.2008 Page 3 of 5
Page 1
Approach
Section
Dimensions
Car data The illustrated maximum approach angles
must not be exceeded. Incorrect approach
Page 2 angles will cause serious maneouvring &
Width positioning problems on the parking system
dimesions for which the local agency of Klaus accepts
no responsibility.
Page 3 4%
Approach
Load plan
Installation 14 %
Page 4
Load plan
Electrical
installation
Option 1: short steel pillar base Option 2: long steel pillar base
Technical
data
Page 5
To be perfor- F6 300 F6 300
med by the F6 F6
customer
Description
300 F3 300 F5
F3 F2 F5
F4
F2
F4
12 F1 F1
115 LP+
10
245 F1 12 LP+
10
F1
245
115
10 cm wide marking compliant to ISO 3864 10 cm wide marking compliant to ISO 3864
platform load F1 F2 F3 F4 F5 F6
2,000 kg 30 1.1 7.4 0.4 3.8 ±1
2,500 kg 35 1.3 8.9 0.6 4.7 ±1
Forces in kN
The steel pillar base can be selected optionally (short or long). Please make sure to note the corresponding forces that apply!
Units are dowelled to the floor. Drilling depth: approx. 15 cm.
Floor and walls are to be made of concrete (quality minimum C20/25)!
Installation data
Free space for longitudinal and vertical ducts (e.g. ventilation)
B1 0 +5
B1 0+2.5 +2.5
B1 0 B1, B2 = (see table on page 2)
(265) (262.5) (262.5)
35 10 35 10 35 10
Free space for vertical pipelines,
ventilation branch canals
15
1
Free space for horizontal
ducting
Approach level
20
1 Size 15 cm is reduced to 5 cm
for type 2061-160
max.140
180
Page 4 and protective conductor
Electrical 6 every Foundation earth connector corner pit
installation 10 m floor
120
Conduit EN 25 (M25)
Technical 8 9 height: + 1.10 m
data 7 1 Equipotential bonding in accordance 1 per
14 0,00 with DIN EN 60204 from foundation system
earth connector to the system
Page 5
To be perfor-
med by the 6 7
customer
Electrical data (included in delivery of Klaus Multiparking)
Description No. Description
to the next
system 8 Terminal box
9 Control line 3 x 0.75 mm2 (PH + N + PE)
10 Control line 7 x 1.5 mm2 with marked wire and protective conductor
11 Operating device
12 Control line 5 x 1.5 mm2 with marked wire and protective conductor
13 Hydraulic unit 3.0 kW, three-phase current, 400 V / 50 Hz
14 Control line 5 x 1.5 mm2 with marked wire and protective conductor
Technical data
Range of application Sound insulation
Generally, this parking system is not suited for short-time parkers According to DIN 4109 (Sound insulation in buildings), para. 4,
(temporary parkers). Please do not hesitate to contact your local annotation 4, Klaus Multiparkers are part of the building services
KLAUS agency for further assistance. (garage systems).
Units Normal sound insulation:
Low-noise power units mounted to rubber-bonded-to metal
DIN 4109, para. 4, Sound insulation against noises from building
mountings are installed. Nevertheless we recommend that parking
services.
system’s garage be built separately from the dwelling.
Table 4 in para. 4.1 contains the permissible sound level values
Available documents emitted from building services for personal living and working areas.
– wall recess plans According to line 2 the maximum sound level in personal living and
– maintenance offer/contract working areas must not exceed 30 dB (A).
– declaration of conformity Noises created by users are not subject to the requirements
– test sheet on airborne and slid-borne sound (see table 4 , DIN 4109).
Corrosion protection The following measures are to be taken to comply with this value:
See separate sheet regarding corrosion protection. – Sound protection package according to offer/order
(Klaus Multiparking GmbH)
Railings – Minimum sound insulation of building R’w = 57 dB
If there are traffic routes next to or behind the installations, railings (to be provided by customer)
compliant to DIN EN 294 must be installed by the customer. Railings
must also be in place during construction. Increased sound insulation (special agreement):
Environmental conditions DIN 4109, Amendment 2, Information on planning and execution,
proposals for increased sound insulation.
Environmental conditions for the area of multiparking systems:
Temperature range – 10 to +40° C. Relative humidity 50 % at a Agreement: Maximum sound level in personal living and working
maximum outside temperature of +40° C. areas 25 dB (A). Noises created by users are not subject to the
If lifting or lowering times are specified, they refer to an environmental requirements (see table 4 , DIN 4109).
temperature of +10 ° C and with the system set up directly next to the The following measures are to be taken to comply with this value:
hydraulic unit. At lower temperatures or with longer hydraulic lines,
these times increase. – Sound protection package according to offer/order
(Klaus Multiparking GmbH)
– Minimum sound insulation of building R’w = 62 dB
(to be provided by customer)
15
Page 3
Building services
7
Approach Lighting, ventilation, fire extinguishing and fire alarm systems. = = = =
Load plan
20
Installation Marking
According to DIN EN 14 010, a warning that identifies this danger
9
Page 4 area must be placed in the entrance area that conforms to ISO 3864.
Electrical This must be done according to EN 92/58/EWG for systems without Conduit EN 25 (M25) 9 9
installation a pit 10 cm from the edge of the platform.
Technical
data Wall cuttings
If the following are not included in the quotation, they will also
Page 5
Any necessary wall cuttings according to page 1.
have to be provided / paid for by the customer:
To be perfor- Electrical supply to the main switch
med by the – Mounting of contactor and terminal box to the wall valve, complete
customer Suitable electrical supply to the main switch and the control wire line wiring of all elements in accordance with the circuit diagram
Description must be provided by the customer during installation. The functionality – Costs for final technical approval by an authorized body
can be monitored on site by our fitters together with the electrician.
If this cannot be done during installation for some reason for which the
customer is responsible, the customer must commission an electrician
at their own expense and risk.
Description
General description Platforms consisting of:
Multiparking system providing dependent parking spaces for 2 cars – Platform base sections
one on top of the other each. The lower vehicle parks directly on the – Adjustable wheel stops
floor plate. The vehicle parked on the bottom must be driven out – Canted access plates
before lowering the platform. – Side members
The height of the platform can be adjusted flexibly (even subsequently). – Cross members
– Screws, nuts, washers, distance tubes, etc.
Adjustment of maximum load of 2,500 kg can be made subsequently.
Dimensions are in accordance with the underlying dimensions of Hydraulic system consisting of:
parking pit, height and width – Hydraulic cylinder
The parking bays are accessed horinzotally (installation deviation ± 1 %). – Solenoid valve
– Safety valve
Vehicles are positioned on the upper parking space using wheel stops on – Hydraulic conduits
the right side (adjust according to operating instructions). – Screwed joints
Operation via operating device with hold-to-run-device using – High-pressure hoses
master keys. – Installation material
The operating elements are usually mounted either in front of the Electric system consisting of:
column or on the outside of the door frame
– Operating device (Emergency Stop, lock, 1 master key per
Operating instructions are attached to each operator's stand. parking space)
For garages with doors at the front of the parking system the special – Terminal box at wall valve
dimensional requirements have to be taken into account. – Electrical locking device
Multiparking system consisting of: Hydraulic unit consisting of:
– 2 steel pillars with bases that are mounted on the floor (short or – Hydraulic power unit (low-noise, installed onto a console with a
long, can be selected optionally). rubber-bonded-to-metal mounting)
– 2 sliding platforms (mounted to the steel pillars with – Hydraulic oil reservoir
sliding bearings) – Oil filling
– 1 platform – Internal geared wheel pump
– 1 mechanic synchronization control system (to ensure synchronous – Pump holder
operation of the hydraulic cylinders while lowering and lifting the – Clutch
platform) – 3-phase-AC-motor (3.0 kW, 230/400 V, 50 Hz)
– 1 hydraulic cylinder – Contactor (with thermal overcurrent relay and control fuse)
– 1 automatic hydraulic safety valve (prevents accidental lowering of – Test manometer
the platform while accessing the platform) – Pressure relief valve
– Dowels, screws, connecting elements, bolts, etc. – Hydraulic hoses (which reduce noise transmission onto the
– The platforms and parking spaces are end-to-end accessible for hydraulic pipe
parking!