Академический Документы
Профессиональный Документы
Культура Документы
ECE343
1 Starting PSPICE
• To run Capture: Select Start → All Programs→ OrCAD 16.0→ OrCAD Capture
CIS
Figure 1:
• Type in the name of the new project and specify the location where it will be saved.
Be sure to save it in U drive (for instance, U: \ECE 343\Lab 1), because PSPICE
cannot re-open files that have been stored in the root directory and your project
will be lost.(refer to fig4)
1
Figure 2:
• Then you will be prompted to create a PSPICE project. Choose Create a Blank
Project and click OK.(fig5)
• If your project did not open to the Schematic Editor then open your new folder
open SCHEMATIC1 → open PAGE1.(fig6)
2 Adding Libraries
• To add the parts libraries select Place Part
• You will be prompted with a new window called Place Part. The parts list should
be empty if the libraries have not been added.
• If library Platte at right hand side of the window is empty, then click the small
dashed square on the right top corner of Library platte. Add library file as fig7 and
fig8 shows.
2
Figure 3:
3
Figure 4:
• Or, you can simply press play button in the tool box
4
Figure 5:
Figure 6:
5
Figure 7:
6
Figure 8:
7
Figure 9:
8
Figure 10: