Академический Документы
Профессиональный Документы
Культура Документы
Following is the detail of Solar Water Heating Systems which can be installed in H.P.
For calculation of area in case of ETC type Solar Water Heating Systems , MNRE approval for
No. of tubes required for different capacities in LPD appearing in Annexure A . Test report
of MNRE approved test Centre will be considered for the calculation of minimum area.
2 CAPITAL SUBSIDY
Capital subsidy on above is limited to 60 % of the bench marked cost of solar water heating
systems from Ministry of New and Renewable (MNRE) , Govt. of India under Off - Grid
and Decertralized Solar Applications of Jawaharlal Nehru Solar Mission (JNNSM) for non-
commercial users and for commercial users it is 30 %. Following is the detail:-
These systems can be installed through HIMURJA as well as in MARKETING MODE mode on
net of subsidy as under:-
HIMURJA is having rate contract with following approved firms for the installation of
all kind of systems from following MNRE approved manufactureres under rate contract:-
M/S. Inter Solar System(P) Ltd. 901-A, Ind. For 100,200,1000 & 2,000 LPD
Area, Phase –II, Chandigarh-160002.
M/S Electrotherm, Renewables, Plot No. 414/1, For 100,200,500,1000 & 2,000 LPD
GIDC, Phase-II, Vatva, Ahmedabad-382445.
Following are the Rates & Technical Parameters of solar water heating systems :-
A RATES
Without H.E. - -
Without H.E. - - -
Without H.E. - -
3. THERMAL PERFORMANCE
Whether tested for thermal performance test Yes
Name of testing Institute.
SPERI, Vallabh, Vidyanagar
Date of test , whether report enclosed SL2010/518, dt. 03-02-2010,SL/2009/279 dt.01-
06-2009
Average efficiency 0.4364
Maximum temperature rise in 24 hours 24.53*C
4. COATING
Name & type of coating Three layer Cu-(SS-A/N)-ALN
Coating emissivity ≤6.55
Absorber area. 0.0846 m2
Transmittance of cover glass tube ≥ 0.89
Reflectance of glass tube 5%
Reflectance of coating ≤ 6.5%
Absorbance of glass tube ≥ 93.5%
5. DETAIL OF INSULATING MATERIAL
a) Material ISO-Poly/ Glass wool
b) Thickness of bottom insulation. -NA-
c) Thermal conductivity <0.2kcal/mh*C/0.023kcal/mh*C
d) Density 1. 40kg/m3 / 48kg/ m3
6. DETAILS OF COLLECTOR & HOT
WATER TANK STANDS
Material MS
Size 35 x 35 x 5 mm & higher
Details of protective coating Powder coating
S. No. Description M/S. Inter Solar System(P) Ltd. 901-A, Ind. Area,
Phase –II, Chandigarh-160002.
Ph. 098140- 04139.
1. Number of collectors proposed 1-100LPD,2-200LPD, 10-1000LPD, 20-2000LPD
2. Detail of collectors.( Flat Plate type )
Type of collector Cu-Cu Size of Cu-cu
collector dimensions. 1860+10 x 1240+10 x 100+10
Absorber area. 2.1 m2 each
Efficiency of collectors. 71%
System Efficiency 50%
Absorber coating Selective coating
Absorbvitity / Emissivity >92%<.20
Collector Box material thickness Aluminum
and other details, if any.
No of risers. 10Nos
Fin width. 118mm
3. DETAIL OF INSULATING
MATERIAL.
Material Rockwool/ Glass wool
Thickness of bottom insulation. 50mm
Thickness of side insulation. 25mm
Thermal Conductivity 0.029 W/mK
Density 48 kg/ m3
4. DETAILS OF GLAZING MATERIAL.
Material Toughened glass
Type and Make Flat/ gold plus /AIS
Thickness 4mm + .2mm
Transitivity More than 80%
5. DETAILS OF COLLECTOR & HOT
WATER TANK STANDS
Material M.S Enamel Painted
Size 35 x 35 x 5 mm
Details of protective coating Enamel painted
6. DETAILS OF HOT WATER TANK
No. of tanks with capacity. One No with each
Material & size SS up to 200LPD, above MS
Dimensions D357/1000,455/1250,715/1250,1010/1250, 1430/1250
7. DETAILS OF INSULATING
MATERIAL FOR HOT WATER
TANK
Thermal Conductivity 0.02W/Mk
Density 48kg/ m2 rock wool
32 kg/ m2puf
Thickness 150 mm rockwool,70mm puff
INSTRUMENTATIONS:-
10. Specifications and details of the hot EPDM piping connection 1 ¼’’ size
water piping with insulation and
cladding material
11. Specifications and details of the cold -do-
water piping.
12. DETAILS OF HEAT EXCHANGER
Specifications ¾’’ ¢ coil type
Flow rates of Hot and Cold Water Concurrent with thermosyphen effect
Material Copper
13. Detail of sacrificing anode or any other 1 ¼’’¢ Aluminum alloy sacrificial anode
feature
INSTRUMENTATIONS:-
In marketing mode 24 No. firms have been approved and registered by HIMURJA for the
installation of Solar Water Heating Systems in the State strictly as per MNRE specifications
on net of subsidy basis subject to adherence of standard Terms and Conditions .
Interested beneficiaries may get installed Solar Water Heating Systems (SWHS)
from HIMURJA or from registered firms up to their satisfaction. The subsidy will be
claimed by registered firms from HIMURJA as per Annexure B, C & D.
HIMURJA will release the subsidy to the registered firms in case of net of subsidy
or to the individual beneficiaries after receipt of requisite documents duly verified by
concerned project officers of HIMURJA and sanction of subsidy from the MNRE.