Академический Документы
Профессиональный Документы
Культура Документы
desired dimensions. As the precision of the machining process increases, the tolerance gets
reduced, but no practical machine can produce components with zero tolerance. Due to this
tolerance only, the concept of MMS, LMS and bonus tolerance is developed.
The situation become even more complicated when multiple components with different
tolerances form an assembly. For such an assembly, what will be the tolerance? How to calculate
the whole assembly tolerance? Assembly tolerance chain analysis or tolerance stack up analysis
is the answer.
Assembly tolerance chain stack up analysis can be performed in many ways. The simplest
method is the worst case method, which we are going to discuss here.
The thickness and tolerance of the four plates are shown in the above figure. We have to find out
the dimension “X” and its tolerance value. Proceed as below:
For PLATE-1:
For PLATE-2:
For PLATE-3:
LSL= 15-0.3 = 14.7
For PLATE-4:
• Sum up the LSL thickness values of all the plates, and you will get the LSL thickness of
the whole assembly as below:
• Calculate the upper specification limit (USL)size for each of the plates like below:
For PLATE-1:
For PLATE-2:
For PLATE-3:
For PLATE-4:
• Sum up the USL thickness values of all the plates, you will get the USL of the whole
assembly as below:
• Sum up the nominal thickness dimensions of all the plates to get the nominal thickness
value of the whole assembly, like below:
TN = 27 + 15 + 15 + 15 = 72
• So, by the worst case method we got the overall dimension (X) of the assembly as:
X = 72 ± 1.5
Conclusion
Assembly tolerance chain stack up analysis is used for calculating the tolerance value of the
overall assembly (or a gap in the assembly) from the tolerance values of the individual
components. The worst case method of the stack up analysis is the simplest among all the
methods used in industry