Академический Документы
Профессиональный Документы
Культура Документы
2009 / 2010
By offering a broad range of specialty torque tools and equipment along
with technical services, Tohnichi has improved the reliability of our
customers' products in transportation, information technology, and many
other fields that affect our daily lives.
Laboratory
Visitors can use this space.
Actual work piece is carried in and
proper tightening torque can be
measured.
Showroom
TOHNICHI torque products are
set-up and displayed so that visitor
can have a clear look on what's
available on the torque market and
what will be coming up soon.
Lecture room
Various courses of torque
engineering seminars are available.
Training room
Our customers can attend
workshops, covering a global
training, general repair and
adjustment on torque products.
The above facilities and services are available at Tokyo, Osaka, Nagoya in Japan and Tohnichi Europe in Belgium.
TOHNICHI SERVICE SYSTEM
Product Services
Preliminary Services
Product Preliminary
Services Services
■ Research and Development ■ Open Technical Laboratory and Showroom
■ Studies on Screw-Tightening Reliability ■ Torque Engineering Seminars
■ Studies on Durability ■ Identifying Solutions
■ Studies on Torque-Measurement ■ Internet and Telephone Consulting
■ Technical Reference Materials on Torque Control
■ Assistance for ISO 9000 Certification
After-Sales
Services
■ Testing and Repair Services
■ Issuing of Calibration Certificates
■ Parts Supplies
■ Workshops for Repair and Adjustment
Brussels
Chicago
Tokyo
Atlanta
Shanghai
World Wide
Services
■ Tohnichi’s International Service Network
■ The World’s Premier Brand
■ English Service
■ Overseas Seminars
■ Calibration Certificate ■
● Torque wrenches are measuring instruments. The calibration certificate is the document
which certifies the accuracy of the torque wrenches, which are traceable to Japanese national
standards. Please keep the calibration certificate for future use.
● Accuracy % is calculated on each scale reading or preset value. Only if marked "F.S." then
calculation is based on the full scale value.
● Tohnichi torque wrenches with a calibration certificate can immediately be used even at
ISO9000 plants without acceptance inspection and request of certificate.
● The calibration certificate is effective for 3 years from the date of inspection or 1 year from the
date first used. Therefore, please fill the date in the calibration certificate when first used.
● Manual torque tools are normally guaranteed to 100,000 cycles or 1 year. It can be also used
up to 1,000,000 cycles if the function is properly maintained and adjusted at every 100,000
cycles.
Contents
How to select Torque Products ・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 Auxiliary Equipment ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 34
From Torque Control To Tightening Assurance System ・・・ 4
SCSP ――――― Click Type Torque Wrench ・・・・・・・・・・・・ 17 Fcon ―――――― Bolt tension stabilizer ・・・・・・・・・・・・・・・ 49
TT2000 ―――― Ultrasonic Bolt Tension Meter ・・・・・・・・・ 50
BCSP ――――― Click Type Torque Wrench ・・・・・・・・・・・・ 18
RPTM ――――― Wire / Rope Tension Meter ・・・・・・・・・・・ 51
SP/RSP ―――― Click Type Torque Wrench ・・・・・・・・・・・・ 19
T-S ―――――― T-Handle Dial Indicating Torque Wrench・・・ 51
SPLS/RSPLS ― Click Type Torque Wrench ・・・・・・・・・・・・ 20
SP-N ――――― Click Type Torque Wrench ・・・・・・・・・・・・ 20
CTA2 ――――― Digital Torque and Angle Wrench ・・・・・・・ 21 Optional Equipment
WQL ―――――― Angle Wrench ・・・・・・・・・・・・・・・・・・・・・ 21
MPQL/MQL ―― Marking Torque Wrench ・・・・・・・・・・・・・・ 22 CD42 ――――― Torque Indicator ・・・・・・・・・・・・・・・・・・・・ 52
CMQSP ―――― Marking Torque Wrench ・・・・・・・・・・・・・・ 22 R-DT999 ――― Data Tank ・・・・・・・・・・・・・・・・・・・・・・・・ 52
POKAYOKE SYSTEM (Error-Proofing) ・・・・・・・・・・・ 23 DFS ―――――― Data Filling System Software ・・・・・・・・・・ 52
TORQUE WRENCH WITH LIMIT SWITCH ・・・・・・・・・ 24 EPP16M2 ――― Printer ・・・・・・・・・・・・・・・・・・・・・・・・・・・ 53
FH256MC ――― Radio Frequency Torque Wrench ・・・・・・・ 25 DECA ――――― Torque Multiplier ・・・・・・・・・・・・・・・・・・・ 53
CNA-4mk2 ―― POKA PATROL (Counter) ・・・・・・・・・・・・・ 25 EVERTORQUE ― Lubricant for repairing torque tool ・・・・・・ 53
CONNECTING CABLE & ACCESSORIES ・・・・・・・・・ 26
DB/DBE/DBR ― Dial Indicating Torque Wrench ・・・・・・・・・ 27
CDB-S ――――― Dial Indicating Torque Wrench ・・・・・・・・・ 27
Technical Data
SCDB-S ―――― Dial Indicating Torque Wrench ・・・・・・・・・ 27
Relation Figure of Screw & Torque ・・・・・・・・・・・・・・・ 54
SF/F/FR ―――― Beam Type Direct Reading Torque Wrench ・・・ 28
Standard Tightening Torque ・・・・・・・・・・・・・・・・・・・・ 55
CSF/CF ―――― Beam Type Direct Reading Torque Wrench ・・・ 28
QF/QFR ―――― Beam Type Direct Reading Torque Wrench ・・・ 28
CEM3 ――――― Digital Torque Wrench ・・・・・・・・・・・・・・・ 29
CTB ―――――― Digital Retightening Type Torque Wrench ・・・ 29
Accessories
Interchangeable Head ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 30
Interchangeable Socket ・・・・・・・・・・・・・・・・・・・・・・・・・・ 32
Interchangeable Bit ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 33
1
Selection of Tightening Tools
TORQUE
Rotary slip torque screwdriver
TORQUE SCREWDRIVER (over-torque prevention) Preset type of RTD
ATG/BTG
CL 100 N × 15D
Size of interhchanbeable head
with 3-jaw chuck
TORQUE GAUGE/ * Interchangeable head type only.
TM
Please refer to TORQUE HAND BOOK for further technical information.
2 3
Selection of Tightening Tools
wireless
For Hexagon
wired wired Socket Cap
Receiver
Count Checker Screw
R-FH256
CNA-4mk2 CMQSP Receiver
Torque Torque
Torque R-FHD256
Controller Indicator
Indicator Special
EM250 CD42
CD42 Product
Software Tightening Count Control Visual Check
Software
Need quotation
Need quotation
Rotary Peak
Torque Sensor Torque Wrench Tester Torque Wrench Checker
Torque Meter
CTB
CEM3-BT
ST2
TCF+TP Special
Product
CEM3
wireless infrared
wired wired wired DOTE3 TCC TF LC2
4 5
RTD
Rotary Slip Adjustable Assembly Adjustable Rotary Slip Graduation
Torque Screwdriver
Torque screwdriver with over-torque prevention rotary-slip mechanism for
Direction various applications from mass production to maintenance work.
Accuracy ± 3%
CAPACITY CAPACITY DIMENSION [mm] CAPACITY
S.I. [cN • m] METRIC [kgf • cm] WEIGHT AMERICAN [lbf • in]
OVERALL LENGTH
MODEL MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. L' MIN. ∼ MAX.
Torque Screwdriver
LTD
Non-Rotary Adjustable Assembly Adjustable Graduation
Torque Screwdriver
Standard torque screw driver for tightening small
Direction
fasteners.
Accuracy ± 3%
CAPACITY CAPACITY DIMENSION [mm] CAPACITY
[cN • m] METRIC [kgf • cm] WEIGHT AMERICAN [lbf • in]
S.I. MODEL OVERALL LENGTH
MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. L' MIN. ∼ MAX.
LTD15CN 2 ∼ 15 0.1 1.5LTD 0.2 ∼ 1.5 0.01 1.5LTD-A 0.2 ∼ 1.5
100 0.05
LTD30CN 4 ∼ 30 0.2 3LTD 0.4 ∼ 3 0.02 3LTD-A 0.4 ∼ 3
LTD60CN LTD60CN 10 ∼ 60 0.5 6LTD 1∼6 0.05 110 0.08 6LTD-A 1∼6
LTD120CN 20 ∼ 120 1 12LTD 2 ∼ 12 0.1 130 0.16 12LTD-A 2 ∼ 12
LTD260CN 60 ∼ 260 2 26LTD 6 ∼ 26 0.2 150 0.27 26LTD-A 6 ∼ 26
LTD500CN 100 ∼ 500 2.5 50LTD 10 ∼ 50 0.25 155 0.32 50LTD-A 10 ∼ 40
LTD1000CN 200 ∼ 1000 100LTD 20 ∼ 100 185 0.58 100LTD-A 20 ∼ 90
5 0.5
LTD2000CN 300 ∼ 2000 200LTD 30 ∼ 200 255 1.15 200LTD-A 30 ∼ 180
Note 1. Preset hook spanner (for LTD260CN ∼ LTD2000CN only).
LTD120CN (With Resin Grip) 2. LTD2000CN comes with a tightening tool.
3. Tightening tool for LTD500CN and LTD1000CN are available (separately sold).
4. Bits for LTD2000CN are TOHNICHI special bits.
5. Resin grip (for LTD120CN and LTD260CN only).
RTDZ
Rotary Slip Adjustable Assembly Adjustable Rotary Slip Graduation Resin Body
Insulated Torque
Screwdriver Insulated design suited for use in electric shock hazard
Direction
conditions.
Accuracy ± 3%
CAPACITY CAPACITY DIMENSION[mm]
[cN • m] METRIC [kgf • cm] WEIGHT
S.I. MODEL OVERALL LENGTH
MODEL [kg]
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. L'
RTDZ260CN RTDZ260CN 60 ∼ 260 2 26RTDZ 6 ∼ 26 0.2 150 0.22
RTDZ500CN 100 ∼ 500 2.5 50RTDZ 10 ∼ 50 0.25 186 0.38
Torque Screwdriver
RNTD30CN 10 ∼ 30 1∼3 95 0.07 1 ∼ 2.5
RNTD60CN 20 ∼ 60 2∼6 2∼5
RNTD120CN 40 ∼ 120 4 ∼ 12 0.11 4 ∼ 10
RNTD60CN 110
RNTD260CN 100 ∼ 260 10 ∼ 26 0.18 10 ∼ 22
RNTD500CN 200 ∼ 500 20 ∼ 50 120 0.27 20 ∼ 40
Note 1. Standard bit in the market place can be used (6.35 HEX).
2. RNTD500CN comes with a T-bar as standard accessory (supportive handle).
3. Counterclockwise tightening model available upon request
Standard Accessories Resin grip (for RNTD120CN and RNTD260CN only).
RNTD120CN (With Resin Grip)
NTD
Preset Torque Assembly Preset
Screwdriver
Preset style non-rotary adjustable screw driver.
Direction Accuracy ± 3%
S.I. CAPACITY METRIC CAPACITY DIMENSION [mm] AMERICAN CAPACITY
[cN • m] [kgf • cm] WEIGHT [Ibf • in]
MODEL OVERALL LENGTH
[kg]
MIN. ∼ MAX. MIN. ∼ MAX. L' MIN. ∼ MAX.
NTD15CN 5 ∼ 15 0.5 ∼ 1.5 0.5 ∼ 1.3
NTD30CN 10 ∼ 30 1∼3 95 0.07 1 ∼ 2.5
NTD60CN 20 ∼ 60 2∼6 2∼5
NTD120CN 40 ∼ 120 4 ∼ 12 0.11 4 ∼ 10
NTD60CN NTD260CN 100 ∼ 260 10 ∼ 26
110
0.18 10 ∼ 22
NTD500CN 200 ∼ 500 20 ∼ 50 120 0.27 20 ∼ 40
NTD1000CN 400 ∼ 1000 40 ∼ 100 155 0.55 40 ∼ 90
Note 1. Standard bit in the market place can be used (6.35 HEX).
2. NTD500CN and NTD1000CN comes with a T-bar as standard accessory (supportive handle).
Standard Accessories Resin grip (for NTD120CN and NTD260CN only)
BMRD30CN2
Accuracy ± 3%
CAPACITY CAPACITY ACCESSORY CAPACITY
S.I. OVERALL LENGTH WEIGHT
[cN • m/N • m] METRIC [gf • cm/kgf • cm] BIT AMERICAN [ozf • in/lbf • in]
Torque Screwdriver
MTD
Dial Indicating Torque Inspection Dial Indicating Direct Reading
Screwdriver for Small
Screws Direct-reading style torque screwdriver for very small
Direction
torque inspection.
Accuracy ± 3%
CAPACITY CAPACITYDIMENSION CAPACITY
[mN • m] METRIC [gf • cm] [mm] WEIGHT ACCESSORY AMERICAN [ozf • in]
S.I. MODEL
MODEL [g] BIT MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. L' MIN. ∼ MAX.
MTD1MN 0.1 ∼ 1 0.02 10MTD 1 ∼ 10 0.2 109.5 22 + #0 - -
MTD2MN 0.3 ∼ 2 0.05 20MTD 3 ∼ 20 0.5 - 0.15 × 1 - -
99.5 21
MTD5MN 0.5 ∼ 5 0.1 50MTD 5 ∼ 50 1 - 0.2 × 1.5 MTD07Z 0.1 ∼ 0.7
MTD5MN MTD10MN 1 ∼ 10 0.2 100MTD 10 ∼ 100 2 132.0 23 - 0.3 × 2 MTD1.4Z 0.2 ∼ 1.4
Note Bit for MTD is included as standard.
Torque Screwdriver
STC200CN 40 ∼ 200 0.2 20STC 4 ∼ 20 0.02 Count value 3 digit 0.43 20STC-A 4 ∼ 20
201
STC400CN 80 ∼ 400 0.5 40STC 8 ∼ 40 0.05 Torque value 4 digit 40STC-A 8 ∼ 40
STC200CN
STC
Inspection of Torque Drivers
EPP16M2
Printer for TOHNICHI digital torque meters and
instruments
I/F Cable
PART# APPLICABLE MODELS
379 R-DT999 → EPP16M2
575 R-DT999 → PC (D-SUB9Pin FEMALE)
584 R-DT999 → PC (USB A type)
EPP16M2
575
QLLS
301 QLE550N ∼ 2100N / CLE, DQLE, TiEQLE
QL-MH
Ratchet Head Type Assembly Adjustable Ratchet Head Graduation
Adjustable Torque
Wrench with Metal
Knurled metal handle version of QL model.
Direction
Handle
Accuracy ± 3%
CAPACITY CAPACITY MAX HAND DIMENSION
[N • m] METRIC [kgf • cm/kgf • m] FORCE WEIGHT
S.I. MODEL OVERALL LENGTH
MODEL [kg]
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L'
QL100N4-MH QL25N-MH 5 ∼ 25 0.25 225QL-MH 50 ∼ 250 kgf • cm 2.5 154 230 0.25
QL50N-MH 10 ∼ 50 0.5 450QL-MH 100 ∼ 500 5 278 260 0.45
QL100N4-MH 20 ∼ 100 900QL4-MH 200 ∼ 1000 392 335 0.69
1 10
■ Optional Accessory QL140N-MH 30 ∼ 140 1400QL-MH 300 ∼ 1400 438 400 0.79
CARRYING CASE QL200N4-MH 40 ∼ 200
2
1800QL4-MH 400 ∼ 2000 20 500 490 1.4
QL280N-MH 40 ∼ 280 2800QL-MH 4 ∼ 28 0.2 467 695 1.9
PART# DIMENSION [ ㎜ ] WEIGHT [㎏] APPLICABLE MODELS
QL100N4 ∼ QL140N
PQL100N4 ∼ PQL140N
840 H91xW429xD120 0.5 MTQL70N, MTQL140N
DB25N ∼ DB100N
APPROX.5PCS of SOCKET(under W19)
QL50N, QL50N-MH
CL50Nx12D, CL50Nx15D
842 H60xW400xD70 0.25 CL50Nx12D-MH, CL50Nx15D-MH
MTQL40N ∼ 70N, CL100N-MH
PQL50N, QL100N4-MH
843 H80xW520xD80 0.36 QL200N4, QL200N4-MH, DQL200N4
Interchangeable Head
CL100N × 15D [L' = 310( ㎜ )]
Torque Wrench
175 0.16
CL12N4×8D 2 ∼ 12 0.1 120CL4 20 ∼ 120 1 79 120CL4-A 20 ∼ 100
SH, RH, QH, 10D 225CL3-A
CL25N×10D 5 ∼ 25 0.25 225CL3 50 ∼ 250 2.5 139 200 0.22 ( )
HH, DH, SH-N
50 ∼ 200
842
QL50N, QL50N-MH
CL50Nx12D, CL50Nx15D
H60xW400xD70 0.25 CL50Nx12D-MH, CL50Nx15D-MH
CL140N×15D 30 ∼ 140
1
1400CL3 300 ∼ 1400
10
397 370 0.67 ( ) QH, HH, 15D
DH, AH,
RQH 1400CL3-A 30 ∼ 100
CLLS
Error-proofing (Pokayoke) torque wrench
with limit switch output to eliminate missed tightening.
DIMENSION
WEIGHT
S.I. MODEL [mm]
L
[kg] POKA Patrol
CLMS12N4x8D
CLLS25Nx10D
50
59
0.32
0.39 CNA-4mk2
CLLS50Nx12D 79
0.54
CLLS50Nx15D 89
CLLS100Nx15D 121 0.69
CLLS140Nx15D 136 0.84
CLLS200Nx19D 224 1.37
CLLS280Nx22D 309 2.17
CLLS420Nx22D 499 3.57
Note 1. For specifications, refer to basic models (QL, CL, PQL, PCL, TiQL).
2. Standard curl cord can be extended to about 2 m in full extension.
SCL
European Style Assembly Adjustable Interchangeable Graduation
Interchangeable
Head Type Adjustable torque wrench with DIN interchangeable
Direction
Adjustable Torque head connector.
Accuracy ± 3%
Wrench
CAPACITY MAX HAND DIMENSION
HEAD SIZE WEIGHT
S.I. MODEL [N • m] FORCE [mm]
[kg]
MIN. ∼ MAX. [mm] [N] L
SCL25N-9x12 5 ∼ 25 9x12 137 215 0.22
SCL50N-9x12 10 ∼ 50 9x12 256 239 0.37
SCL50N - 9x12 SCL100N-9x12 20 ∼ 100 9x12 370 313 0.52
SCL200N-14x18 40 ∼ 200 14x18 476 464 1.2
Note 1. Overall length does not include the interchangeable head part.
2. Applicable to European Style head only. TOHNICHI interchangeable head cannot be used.
DQL/DQLE
Dual Square Assembly Adjustable Ratchet Head Graduation Bi-directional
Drives Type
Direction Adjustable Torque wrench with dual square drives for both clockwise
Torque and counterclockwise tightening.
Wrench
Accuracy ± 3%
■ DQL200N4 Optional Accessory CAPACITY CAPACITY MAX HAND DIMENSION CAPACITY
CARRYING CASE S.I. MODEL [N • m] METRIC [kgf • cm/kgf • m]
MODEL
FORCE [mm] WEIGHT AMERICAN
[kg] MODEL
[lbf • ft]
PART# DIMENSION [ ㎜ ] WEIGHT [㎏] APPLICABLE MODELS MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L' MIN. ∼ MAX.
843 H80xW520xD80 0.36 QL200N4, QL200N4-MH, DQL200N4 DQL200N4 40 ∼ 200 1800DQL4 400 ∼ 2000 kgf·cm 20 500 490 1.4 1800DQL4-A 30 ∼ 150
2
DQL280N 40 ∼ 280 2800DQL3 4 ∼ 28 kgf·m 0.2 467 695 2.0 2800DQL3-A 30 ∼ 200
DQLE550N 100 ∼ 550 5500DQLE 10 ∼ 55 500 1195 5.1 5500DQLE-A 100 ∼ 400
■ DQLE Optional Accessory DQLE750N 100 ∼ 750 5 7500DQLE 10 ∼ 75 0.5 600 1370 7.1 7500DQLE-A 100 ∼ 600
DQLE1000N 100 ∼ 1000 10000DQLE 10 ∼ 100 714 1540 9.5 10000DQLE-A 100 ∼ 700
Standard Adjusting tool for DQLE550N ∼ DQLE1000N
ADJUSTING Accessories
MTQL
Torque Wrench Assembly Adjustable Ratchet Head Graduation
for Motorsports
Wide range torque wrench for sports related vehicle use.
Direction
Accuracy ± 5%
CAPACITY CAPACITY MAX HAND DIMENSION
[N • m] METRIC [kgf·m] FORCE [mm] WEIGHT
S.I. MODEL
MODEL [kg]
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L'
MTQL70N MTQL40N 5 ∼ 40 0.5 400MTQL 0.5 ∼ 4 0.05 227 250 0.45
MTQL70N 10 ∼ 70 700MTQL 1∼7 337 285 0.47
1 0.1
MTQL140N 20 ∼ 140 1400MTQL 2 ∼ 14 438 400 0.77
Standard Carrying case
■MTQL Optional Accessory Accessories
TOOL
PART# APPLICABLE MODELS
Torque Wrench
301 QLE550N ∼ 2100N / CLE, DQLE, TiEQLE
YCL
Overtorque Prevention Assembly Interchangeable Graduation Two Step Motion
Interchangeable Head Type
Direction Adjustable Torque Wrench Two step motion prevents over-torque.
Accuracy ± 3%
CAPACITY CAPACITY MAX HAND DIMENSION CAPACITY
[N • m] METRIC [kgf • cm] FORCE [ mm ] WEIGHT INTERCHANGEABLE AMERICAN [lbf·in / lbf·ft]
S.I. MODEL
MODEL [kg] HEADS MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L' MIN. ∼ MAX.
YCL90N × 15D YCL12Nx10D 5 ∼ 12 0.1 120YCL 50 ∼ 120 1 60 SH, RH, 10D YCL100I 50 ∼ 100 lbf·in
YCL23Nx10D 10 ∼ 23 0.2 230YCL 100 ∼ 230 2 115
226 0.32
QH, HH (
YCL200I )
100 ∼ 200
YCL45Nx12D 20 ∼ 45 0.25 450YCL 200 ∼ 450 2.5 173 SH, RH, QH, YCL400I 200 ∼ 400
YCL70Nx12D 30 ∼ 70 0.5 700YCL 300 ∼ 700 5 270
275 0.50 ( HH, DH ) 12D YCL600I 300 ∼ 600
YCL90Nx15D 40 ∼ 90 0.25 900YCL 400 ∼ 900 2.5 250 YCL750I 400 ∼ 750
YCL140Nx15D 60 ∼ 140 1400YCL 600 ∼ 1400 390
369 1.0 ( HH,SH,DH,RH,RQH
QH, 15D
) YCL1000I 600 ∼ 1000
0.5 5
YCL180Nx19D 80 ∼ 180 1800YCL 800 ∼ 1800 330 570 1.70 ( HH,SH,DH,RH,RQH
QH, 19D
) YCL100F 45 ∼ 100 lbf·ft
TiQL/TiQLE
Titanium Assembly Pre-Lock Ratchet Head Graduation Titanium Material
Type
Direction Adjustable World’s first titanium torque wrench.
Torque
Wrench Accuracy ± 3%
CAPACITY CAPACITY MAX HAND DIMENSION
[N • m] METRIC [kgf • cm/kgf • m] FORCE [mm] WEIGHT
S.I. MODEL
MODEL [kg]
TiQL180N [L' = 594( ㎜ )] MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L'
TiQL180N 1800TiQL 450 494 0.9
040 ∼ 180 400 ∼ 1800 kgf • cm 20
TiLQL180N 2 1800TiLQL 360 594 1.0
kgf • m
TiEQLE750N [L' = 1365( ㎜ )] TiEQL360N 080 ∼ 360 3600TiEQL 8 ∼ 36 0.2 406 987 2.4
TiEQLE750N 100 ∼ 750 5 7500TiEQLE 10 ∼ 75 0.5 600 1365 4.5
TiEQLE1400N 200 ∼ 1400 10 14000TiEQLE 20 ∼ 140 1 848 1794 7.5
■ TiEQLE Optional Accessory Note 1. Other Limit switch type and wireless type are available upon request.
2. Special model such as TiEQL550N is also available upon request.
Standard 1. Color marking band (3 colors).
Accessories 2. Hex key (For TiQL180N, TiLQL180N, TiQL360N, and TiEQL360N).
ADJUSTING 3. Adjusting tool (For TiEQLE750N, TiEQLE1400N).
TOOL FOR TiQLE
PART# APPLICABLE MODELS
301 QLE550N ∼ 2100N / CLE, DQLE, TiEQLE
TiQLLS
Error-proofing (Pokayoke) torque wrench with limit switch
output to eliminate missed tightening.
DIMENSION
[mm] WEIGHT
S.I. MODEL
L
[kg] POKA Patrol
TiQLLS180N
TiLQLLS180N
179
1.0
1.1 CNA-4mk2
TiEQLLS360N 351 2.5
Note 1. For specifications, refer to basic models (QL,
CL, PQL, PCL, TiQL).
2. Standard curl cord can be extended to a bout 2m
in full extension.
PQL100N4
Accuracy ± 3%
■ PQL Optional Accessory CAPACITY CAPACITY MAX HAND DIMENSION CAPACITY
S.I. [N • m] METRIC [kgf • cm] [mm] WEIGHT AMERICAN [lbf • in][lbf • ft]
FORCE
MODEL MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L' MIN. ∼ MAX.
PQL6N4 1∼6 0.05 60PQL4 10 ∼ 60 0.5 45 60PQL4-A 10 ∼ 50 lbf • in
190 0.19
PQL12N4 2 ∼ 12 0.1 120PQL4 20 ∼ 120 1 89 120PQL4-A 20 ∼ 100
CARRYING CASE 840 PQL25N 5 ∼ 25 0.25 225PQL 50 ∼ 250 2.5 159 215 0.25 225PQL-A 50 ∼ 200
PQL50N 10 ∼ 50 0.5 450PQL 100 ∼ 500 5 274 250 0.40 450PQL-A 100 ∼ 400
PART# DIMENSION [ ㎜ ] WEIGHT [㎏] APPLICABLE MODELS
QL100N4 ∼ QL140N PQL100N4 20 ∼ 100 900PQL4 200 ∼ 1000 395 320 0.65 900PQL4-A 15 ∼ 75 lbf • ft
1 1
PQL100N4 ∼ PQL140N PQL140N 30 ∼ 140 1400PQL 300 ∼ 1400 441 385 0.75 1400PQL-A 30 ∼ 100
840 H91xW429xD120 0.5 MTQL70N, MTQL140N PQL200N4 40 ∼ 200 2 1800PQL4 400 ∼ 2000 20 503 470 1.40 1800PQL4-A 30 ∼ 130
DB25N ∼ DB100N
APPROX.5PCS of SOCKET(under W19)
Torque Wrench
QL50N, QL50N-MH
CL50Nx12D, CL50Nx15D
PQLLS
842 H60xW400xD70 0.25 CL50Nx12D-MH, CL50Nx15D-MH
MTQL40N ∼ 70N, CL100N-MH
PQL50N, QL100N4-MH
Error-proofing (Pokayoke) torque wrench
with limit switch output to eliminate missed
tightening.
DIMENSION
WEIGHT
S.I. MODEL [mm]
[kg]
L
PQLLS25N 34 0.39
PQLLS50N 49 0.57 POKA Patrol
PQLLS100N4
PQLLS140N
PQLLS200N4
81
101
179
0.82
0.92
1.67
CNA-4mk2
Note 1. For specifications, refer to basic models
(QL, CL, PQL, PCL, TiQL).
2. Standard curl cord can be extended to about 2m
in full extension.
QRSP
Open Ring Head Type Assembly Preset Open Ratchet Head
Preset Torque Wrench
Direction
Open ratchet torque wrench for piping work.
Accuracy ± 3%
S.I.CAPACITY METRIC CAPACITY MAX HAND DIMENSION
[N • m] [kgf • cm] [mm] WEIGHT
MODEL FORCE
[kg]
MIN. ∼ MAX. MIN. ∼ MAX. [N] L'
QRSP38N17 195 300
QRSP38N19 194 305 0.4
QRSP38N × 17 10~45 100~450
QRSP38N21 192 305
QRSP38N24 191 310 0.43
Note Cannot be used for inspection purpose.
QRSPLS
■ QRSP Optional Accessory
THRUSTRING TOOL FOR SP
PART# TOOL No. APPLICABLE MODELS
SP38N, 67N, QSP50N ∼ 140N
312 A-3
BQSP50N ∼ 140N / BCSP Error-proofing (Pokayoke) torque wrench with limit switch
output to eliminate missed tightening.
POKA Patrol
DIMENSION
S.I.MODEL [mm]
L
WEIGHT
[kg] CNA-4mk2
QRSPLS38NX17 94
QRSPLS38NX19 95 0.57
QRSPLS38NX21 97
QRSPLS38NX24 99 0.6
Note 1. For specifications, refer to basic models (QSP,
CSP, QRSP, SP, RSP, SP-N).
2. Standard curl cord can be extended to about 2m
in full extension.
3. The curl cord length of SPLS19N-8x10N is about
5m in full extension.
Interchangeable Head
PCL100N × 15D
Accuracy ± 3%
SH AH RH CAPACITY CAPACITY
MAX HAND DIMENSION CAPACITY
[N • m] METRIC [kgf • cm]
FORCE [mm] WEIGHT INTERCHANGEABLE AMERICAN [Ibf • in/ibf • ft]
S.I.MODEL
MODEL [kg] HEADS MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L' MIN. ∼ MAX.
lbf·in
PCL6N4x8D 1∼6 0.05 60PCL4 10 ∼ 60 0.5 39 SH, RH, 8D 60PCL4-A 10 ∼ 50
QH RQH DH
PCL12N4x8D 2 ∼ 12 0.1 120PCL4 20 ∼ 120 1 79
170 0.16
QH, HH (
120PCL4-A 20 ∼ 100 )
SH, RH, QH, 10D 225PCL-A
PCL25Nx10D 5 ∼ 25 0.25 225PCL 50 ∼ 225 2.5 137 195 0.22 ( )
HH, DH, SH-N
50 ∼ 200
HH SH-N FH
Torque Wrench
PCL50Nx12D
10 ∼ 50 0.5
450PCL 100 ∼ 450
5
235 220 ( HH,SH,DH,RH,RQH
QH, 12D 450PCL-A
) 100 ∼ 400
1400PCL-A 30 ∼ 100
PCLLS
Error-proofing (Pokayoke) torque wrench with limit switch
output to eliminate missed tightening.
DIMENSION
WEIGHT
S.I. MODEL [mm] POKA Patrol
[kg]
L
PCLLS25Nx10D
PCLLS50Nx12D
59
79
0.39
0.49 CNA-4mk2
PCLLS50Nx15D 89 0.49
PCLLS100Nx15D 121 0.65
PCLLS140Nx15D 136 0.8
PCLLS200Nx19D 224 1.47
Note 1. For specifications, refer to basic models
(QL, CL, PQL, PCL, TiQL).
2. Standard curl cord can be extended to about
2 m in full extension.
MT70N
Moto Tork (Prelock Assembly Pre-Lock Interchangeable Graduation
Adjustable Specialty
Direction Torque Wrench Allows basic tightening tool to be used as a torque
for Motorcycle wrench.
Maintenance)
Accuracy ± 5%
CAPACITY CAPACITY APPLICABLE BOLT MAX HAND
[N • m] METRIC [kgf • m] (REFERENCE) WEIGHT
S.I. MODEL POWER
MODEL [kg]
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. STEEL BOLT HIGHT TENSION BOLT [N]
MT70N 10 ∼ 70 0.2 MT-7 1.0 ∼ 7.0 0.02 M8, M10, M12 (M14) M6 (M7), M8, M10 292 0.65
Note Accuracy for MT70N is ± 5%.
Standard 1. Hex key
Accessories 2. Carrying case
MT70N
QSP100N4
Accuracy ± 3%
S.I.CAPACITY METRIC CAPACITY MAX HAND DIMENSION AMERICAN CAPACITY
■ QSP Optional Accessory MODEL [N • m] [kgf • cm/kgf • m] FORCE [mm] WEIGHT
[kg]
[lbf • in]
MIN. ∼ MAX. MIN. ∼ MAX. [N] L' MIN. ∼ MAX.
QSP1.5N4 0.3 ∼ 1.5 3 ∼ 15 kgf·cm 15 3 ∼ 13
0.16
QSP3N4 0.6 ∼ 3 6 ∼ 30 30 165 6 ∼ 25
THRUSTRING
QSP6N4 1∼6 10 ∼ 60 45 10 ∼ 50
TOOL 0.19
QSP12N4 2 ∼ 12 20 ∼ 120 89 175 20 ∼ 100
PART# TOOL No. APPLICABLE MODELS QSP25N3 5 ∼ 25 50 ∼ 250 155 215 0.25 50 ∼ 200
310 A-1 QSP1.5N ∼ 6N / CSP
QSP50N3 10 ∼ 50 100 ∼ 500 281 240 0.4 100 ∼ 400
SP2N ∼ 19N, QSP12N / CSP
311 A-2 QSP100N4 20 ∼ 100 200 ∼ 1000 398 315 0.65 100 ∼ 750
Torque Wrench
QSPLS
ADJUSTING TOOLS
FOR QSP3
PART# DIMENSION[ ㎜ ] APPLICABLE MODELS
QSP25N3 / CSP3, QSP1.5N4 ∼ 12N4
931 2.5x1.5x6
BQSP25N3 / BCSP3, CSP1.5N4 ∼ 12N4 Error-proofing (Pokayoke) torque wrench with limit switch
QSP50N3 ∼ 280N3 / CSP3, BQSP100N4, 200N4
930 4x2.5x8
BQSP50N3 ∼ 280N3 / BCSP3, BCSP100N4, 200N4 output to eliminate missed tightening.
DIMENSION [mm] WEIGHT
S.I.MODEL
L [kg] POKA Patrol
CNA-4mk2
QSPMS12N4 32 0.32
QSPLS25N3 34 0.37
QSPLS50N3 49 0.57
QSPLS100N4 81 0.8
QSPLS140N3 101 0.9
QSPLS200N4 179 1.47
QSPLS280N3 249 2.57
QSPLS420N 449 3.87
BQSP
Bi-Directional Type Assembly Preset Ratchet Head Bi-directional
Preset Torque Wrench
Direction
Single purpose torque wrench applicable for bi-
directional tightening (clockwise / counter-clockwise).
BQSP100N4
Accuracy ± 3%
S.I.CAPACITY METRIC CAPACITY MAX HAND DIMENSION AMERICAN CAPACITY
■ BQSP Optional Accessory MODEL [N • m] [kgf·cm/kgf·m] FORCE [mm] WEIGHT [lbf • in]
[kg]
THRUSTRING TOOL MIN. ∼ MAX. MIN. ∼ MAX. [N] L' MIN. ∼ MAX.
PART# TOOL No. APPLICABLE MODELS BQSP25N3 5 ∼ 25 50 ∼ 250 kgf • cm 161 214 0.20 50 ∼ 200
SP2N ∼ 19N, QSP12N / CSP BQSP50N3 10 ∼ 50 100 ∼ 500 279 242 0.40 100 ∼ 400
311 A-2
QSP25N / CSP, BQSP25N / BCSP BQSP100N4 20 ∼ 100 200 ∼ 1000 390 314 0.63 100 ∼ 750
SP38N, 67N, QSP50N ∼ 140N BQSP140N3 30 ∼ 140 300 ∼ 1400 444 379 0.73 300 ∼ 1000
312 A-3
BQSP50N ∼ 140N / BCSP
BQSP200N4 40 ∼ 200 400 ∼ 2000 500 462 1.3 350 ∼ 1600
SP120N ∼ 310N, QSP200N ∼ 280N
313 A-4 BQSP280N3 40 ∼ 280 4 ∼ 28 kgf • m 664.5 2.4 350 ∼ 2500
BQSP200N, 280N / BCSP 466
QSP420N / CSP BQSP420N 60 ∼ 420 6 ∼ 42 970.5 3.7 600 ∼ 3600
314 A-5
BQSP420N / BCSP Note The set torque value must be the same for clockwise and counterclockwise directions.
■ BQSP3/4 Optional
Accessory
ADJUSTING TOOLS FOR QSP3
PART# DIMENSION[ ㎜ ] APPLICABLE MODELS
QSP25N3 / CSP3, QSP1.5N4 ∼ 12N4
931 2.5x1.5x6
BQSP25N3 / BCSP3, CSP1.5N4 ∼ 12N4
QSP50N3 ∼ 280N3 / CSP3, BQSP100N4, 200N4
930 4x2.5x8
BQSP50N3 ∼ 280N3 / BCSP3, BCSP100N4, 200N4
CSP100N3 × 15D
Accuracy ± 3%
S.I.CAPACITY METRIC CAPACITY MAX HAND DIMENSION AMERICAN CAPACITY
■ CSP Optional Accessory MODEL [N • m] [kgf·cm/kgf·m] FORCE [mm] WEIGHT INTERCHANGEABLE [lbf • in]
[kg] HEADS
THRUSTRING TOOL MIN. ∼ MAX. MIN. ∼ MAX. [N] L' MIN. ∼ MAX.
PART# TOOL No. APPLICABLE MODELS CSP1.5N4x8D 0.3 ∼ 1.5 3 ∼ 15 kgf·cm 13 3 ∼ 13
130
310 A-1 QSP1.5N ∼ 6N / CSP CSP3N4x8D 0.6 ∼ 3 6 ∼ 30 26 SH, RH, 8D 6 ∼ 25
311 A-2
SP2N ∼ 19N, QSP12N / CSP CSP6N4x8D 1∼6 10 ∼ 60 39 ( QH, HH) 10 ∼ 50
QSP25N / CSP, BQSP25N / BCSP 165 0.2
CSP12N4x8D 2 ∼ 12 20 ∼ 120 79 20 ∼ 100
SP38N, 67N, QSP50N ∼ 140N
312 A-3
BQSP50N ∼ 140N / BCSP
SP120N ∼ 310N, QSP200N ∼ 280N
CSP25N3x10D 5 ∼ 25 50 ∼ 250 134 195 ( HH,SH,DH,
RH, QH, 10D
SH-N )
50 ∼ 200
313 A-4
Torque Wrench
BQSP200N, 280N / BCSP SH, RH, QH, 12D
314 A-5
QSP420N / CSP CSP50N3x12D 240 215 ( HH, DH, RQH )
BQSP420N / BCSP 10 ∼ 50 100 ∼ 500 0.3 100 ∼ 400
CSP50N3x15D 229 220
SH, RH, QH,
CSPLS
Interchangeable Head Error-proofing (Pokayoke) torque wrench with limit switch
output to eliminate missed tightening.
DIMENSION [mm] WEIGHT
S.I.MODEL
L [kg] POKA Patrol
CNA-4mk2
SH AH RH CSPMS12N4X8D 50
0.32
CSPLS25N3X10D 59
CSPLS50N3X12D 79
0.5
CSPLS50N3X15D 89
CSPLS100N3X15D 121
QH RQH DH 0.74
CSPLS140N3X15D 136
CSPLS200N3X19D 224 1.37
CSPLS280N3X22D 309 2.17
CSPLS420NX22D 499 3.87
HH SH-N FH
Note 1. For specifications, refer to basic
models (QSP, CSP, QRSP, SP,
RSP, SP-N).
2. Standard curl cord can be
extended to about 2m in full
extension.
3. The curl cord length of SPLS19N-
8x10N is about 5m in full
extension.
SCSP
European Style Assembly Interchangeable Preset
Interchangeable Head
Direction Type Preset Torque Single purpose torque wrench with DIN interchangeable
Wrench head connector.
SCSP50N-9 × 12
Accuracy ± 3%
S.I.CAPACITY METRIC CAPACITY HEAD MAX HAND DIMENSION
[N • m] [kgf • cm] SIZE [mm] WEIGHT
MODEL FORCE
[kg]
MIN. ∼ MAX. MIN. ∼ MAX. [mm] [N] L
SCSP25N-9x12 5 ∼ 25 50 ∼ 250 9x12 138 204 0.15
SCSP50N-9x12 10 ∼ 50 100 ∼ 500 9x12 258 230 0.3
SCSP100N-9x12 20 ∼ 100 200 ∼ 1000 9x12 375 302 0.45
SCSP200N-14x18 40 ∼ 200 400 ∼ 2000 14x18 476 434 1
Note 1. Overall length does not include interchangeable head part.
2. Applicable for European Style head only. TOHNICHI interchangeable head cannot be used.
BCSP100N3 × 15D
Accuracy ± 3%
S.I. MODEL METRIC CAPACITY MAX HAND DIMENSION AMERICAN CAPACITY
BCSP Optional Accessory MODEL [N • m] [kgf • cm/kgf • m] FORCE [mm] WEIGHT INTERCHANGEABLE [lbf • in]
[kg] HEADS
THRUSTRING TOOL MIN. ∼ MAX. MIN. ∼ MAX. [N] L' MIN. ∼ MAX.
PART# TOOL No. APPLICABLE MODELS
SP2N ∼ 19N, QSP12N / CSP
BCSP25N3x10D 5 ∼ 25 50 ∼ 250 kgf • cm 139 193 0.20 ( SH,HH,RH,DHQH, ) 10D 50 ∼ 200
311 A-2
QSP25N / CSP, BQSP25N / BCSP
SH, RH, QH,
312 A-3
SP38N, 67N, QSP50N ∼ 140N BCSP50N3x12D
10 ∼ 50 100 ∼ 500
239 214
0.23 ( HH, DH ) 12D 100 ∼ 400
BQSP50N ∼ 140N / BCSP
BCSP50N3x15D 227 217 100 ∼ 400
SP120N ∼ 310N, QSP200N ∼ 280N SH, RH, QH, 15D
313 A-4
( HH, DH, RQH )
Torque Wrench
BQSP200N, 280N / BCSP BCSP100N3x15D 20 ∼ 100 200 ∼ 1000 343 290 0.57 100 ∼ 750
QSP420N / CSP BCSP140N3x15D 30 ∼ 140 300 ∼ 1400 400 349 0.62 300 ∼ 1000
314 A-5
BQSP420N / BCSP
SH, RH, QH, 19D
BCSP200N3x19D 40 ∼ 200 400 ∼ 2000 449 427 1.2 ( HH, DH, RQH ) 350 ∼ 1600
SP38N × 10
RSP38N × 14
Accuracy ± 3% Accuracy ± 3%
S.I. CAPACITY METRIC CAPACITY Applicable bolt (reference) HEAD OVERALL S.I. CAPACITY METRIC CAPACITY Applicable bolt (reference) HEAD OVERALL
[N • m] [kgf • cm] WEIGHT WEIGHT
MODEL S…Small Hex O.W. x THICKNESS LENGTH MODEL [N • m] [kgf • cm] S…Small Hex O.W. x THICKNESS LENGTH
[kg] [kg]
MIN. ∼ MAX. MIN. ∼ MAX. H…High tension [mm] [mm] MIN. ∼ MAX. MIN. ∼ MAX. H…High tension [mm] [mm]
SP2Nx5.5 M3 SP160Nx21 30 ∼ 160 300 ∼ 1600 52 x 13 440 0.95
0.4 ∼ 2 4 ∼ 20 M14
SP2Nx7 RSP160Nx21 32 ∼ 170 320 ∼ 1700 35 x 13 470 0.9
M4
SP8Nx7 1.5 ∼ 8 15 ∼ 80 23 x 5 180 SP38Nx22 8 ∼ 38 80 ∼ 380 Air conditioner(3/8 R410) 41 x 8 265 0.35
0.15
SP2Nx8 0.4 ∼ 2 4 ∼ 20 ー SP67Nx22 13 ∼ 67 130 ∼ 670 M14 45 x 10 325 0.5
Torque Wrench
SP8Nx8 1.5 ∼ 8 15 ∼ 80 SP120Nx22 24 ∼ 120 240 ∼ 1200 M14, M16(H) 51 x 11 395 0.75
RSP8Nx8 2 ∼ 7.2 20 ∼ 90 200 RSP120Nx22 25 ∼ 127 250 ∼ 1270 35.4 x 13 420 0.8
M5 15.1 x 6
RSP19Nx8 4 ∼ 14.1 40 ∼ 210 230 0.2 SP160Nx22 30 ∼ 160 300 ∼ 1600 M14, M16(S) 56 x 13 440 0.95
SP38Nx8 8 ∼ 38 80 ∼ 380 31 x 8 250 0.35 RSP160Nx22 32 ∼ 170 320 ∼ 1700 35 x 15.5 470 0.9
SP8Nx9 1.5 ∼ 8 15 ∼ 80 ー 23 x 5 180 0.15 SP220Nx22 45 ∼ 220 450 ∼ 2200 60 x 15 580 1.4
M14(H)
SP38Nx9 8 ∼ 38 80 ∼ 380 ー 31 x 8 255 0.35 RSP220Nx22 48 ∼ 230 480 ∼ 2300 38.4 x 13 615 1.35
SP2Nx10 0.4 ∼ 2 4 ∼ 20 SP310Nx22 65 ∼ 310 650 ∼ 3100 M16(S, H) 60 x 16 640 2
23 x 5 180
SP8Nx10 1.5 ∼ 8 15 ∼ 80 M6 0.15 SP120Nx23 24 ∼ 120 240 ∼ 1200 ー 51 x 11 395 0.75
RSP8Nx10 2∼9 20 ∼ 90 17.5 x 7 205 SP8Nx24 1.5 ∼ 8 15 ∼ 80 ー 34 x 8 195 0.15
SP19Nx10 M6(H) 27 x 6.5 210 SP38Nx24 8 ∼ 38 80 ∼ 380 ー 43 x 8 265 0.35
SP19N-1x10 24 x 12 SP67Nx24 13 ∼ 67 130 ∼ 670 plumbing 46 x 11 330 0.5
3.5 ∼ 19 35 ∼ 190
SP19N-2x10 Flare nut 24 x 20 215 0.2 SP120Nx24 24 ∼ 120 240 ∼ 1200 M16 51 x 11 400 0.75
SP19N-3x10 24 x 15 SP160Nx24 30 ∼ 160 300 ∼ 1600 M16, plumbing 56 x 13 455 0.95
RSP19Nx10 4 ∼ 12.2 40 ∼ 210 17.5 x 7 230 RSP160Nx24 32 ∼ 170 320 ∼ 1700 M16 39 x 15.5 475 0.9
SP38Nx10 8 ∼ 38 80 ∼ 380 M6(H) 31 x 8 255 SP220Nx24 45 ∼ 220 450 ∼ 2200 65 x 15 580 1.4
RSP38Nx10 9 ∼ 24.2 90 ∼ 420 17.5 x 7 275 RSP220Nx24 48 ∼ 230 480 ∼ 2300 40 x 13 615 1.35
M16(H), M18(S)
SP38N-1x10 24 x 12 0.35 SP310Nx24 65 ∼ 310 650 ∼ 3100 62 x 16 640
2
SP38N-2x10 8 ∼ 38 80 ∼ 380 Flare nut 24 x 20 250 RSP310Nx24 68 ∼ 255 680 ∼ 3200 41.8 x 15 680
SP38N-3x10 24 x 15 SP160Nx26 30 ∼ 160 300 ∼ 1600 Air conditioner(1/2 R410A) 56 x 13 455 0.95
SP2Nx12 0.4 ∼ 2 4 ∼ 20 SP8Nx27 1.5 ∼ 8 15 ∼ 80 ー 40 x 8 200 0.15
25 x 5.5 180 0.15
SP8Nx12 1.5 ∼ 8 15 ∼ 80 M8(S) SP38Nx27 8 ∼ 38 80 ∼ 380 ー 45 x 8 270 0.35
SP19Nx12 3.5 ∼ 19 35 ∼ 190 30 x 6.5 210 0.2 SP67Nx27 13 ∼ 67 130 ∼ 670 plumbing 50 x 11 330 0.5
SP38Nx12 8 ∼ 38 80 ∼ 380 35 x 8 250 SP120Nx27 24 ∼ 120 240 ∼ 1200 ー 53 x 15 400 0.75
M8(S, H) 0.35
RSP38Nx12 9 ∼ 29.5 90 ∼ 420 20.4 x 8 275 SP160Nx27 30 ∼ 160 300 ∼ 1600 56 x 13 455 0.95
SP2Nx13 0.4 ∼ 2 4 ∼ 20 ー SP220Nx27 45 ∼ 220 450 ∼ 2200 M18 65 x 15 580 1.4
25 x 5.5 180 0.15
SP8Nx13 1.5 ∼ 8 15 ∼ 80 RSP220Nx27 48 ∼ 230 480 ∼ 2300 45 x 13 620 1.35
SP19Nx13 3.5 ∼ 19 35 ∼ 190 M8 30 x 6.5 210 SP310Nx27 65 ∼ 310 650 ∼ 3100 66 x 16 645
0.2 2
RSP19Nx13 4 ∼ 21 40 ∼ 210 22 x 7 235 RSP310Nx27 68 ∼ 320 680 ∼ 3200 M18(H), M20(S) 45 x 15 680
SP38Nx13 8 ∼ 38 80 ∼ 380 35 x 8 250 SP420Nx27 090 ∼ 420 950 ∼ 2200 78 x 18 840 3.3
M8(H) 0.35
RSP38Nx13 9 ∼ 29.5 90 ∼ 420 21.5 x 8 280 SP67Nx29 13 ∼ 67 130 ∼ 670 special 50 x 11 330 0.5
SP19Nx14 3.5 ∼ 19 35 ∼ 190 30 x 6.5 210 0.2 SP220Nx29 45 ∼ 220 450 ∼ 2200 ー 65 x 15 585 1.4
SP38Nx14 8 ∼ 38 80 ∼ 380 M10(S) 35 x 8 250 SP67Nx30 13 ∼ 67 130 ∼ 670 special 52 x 11 335 0.5
0.35
RSP38Nx14 9 ∼ 42 90 ∼ 420 23.3 x 9 280 SP120Nx30 24 ∼ 120 240 ∼ 1200 ー 56 x 15 400 0.75
SP67Nx14 13 ∼ 67 130 ∼ 670 45 x 10 320 0.5 SP220Nx30 45 ∼ 220 450 ∼ 2200 plumbing 63 x 15 585 1.4
RSP67Nx14 14 ∼ 59 140 ∼ 730 M10(S, H) 24.8 x 10 350 0.45 SP310Nx30 65 ∼ 310 650 ∼ 3100 72 x 16 645
M20 2
SP120Nx14 24 ∼ 120 240 ∼ 1200 45 x 11 390 0.75 RSP310Nx30 68 ∼ 320 680 ∼ 3200 50 x 15 685
SP38Nx16 8 ∼ 38 80 ∼ 380 38 x 8 250 SP420Nx30 90 ∼ 420 900 ∼ 4200 M24, M22(S) 78 x 18 840 3.3
M10 0.35
RSP38Nx16 9 ∼ 42 90 ∼ 420 26.2 x 9 280 SP560Nx30 130 ∼ 560 1300 ∼ 5600 ー 81 x 19 995 4
SP67Nx16 13 ∼ 67 130 ∼ 670 45 x 10 320 0.5 SP67Nx32 13 ∼ 67 130 ∼ 670 ー 54 x 11 335 0.5
M10(H)
RSP67Nx16 14 ∼ 59 140 ∼ 730 27.2 x 10 350 0.45 SP220Nx32 45 ∼ 220 450 ∼ 2200 65 x 15 585 1.4
plumbing
SP2Nx17 0.4 ∼ 2 4 ∼ 20 ー 28 x 6 190 0.15 SP310Nx32 65 ∼ 310 650 ∼ 3100 72 x 16 645 2
SP19Nx17 3.5 ∼ 19 35 ∼ 190 ー 31 x 8 220 0.2 SP420Nx32 90 ∼ 420 900 ∼ 4200 M22 78 x 18 840 3.3
SP38Nx17 8 ∼ 38 80 ∼ 380 Air conditioner(1/4 R410A) 38 x 8 255 SP560Nx32 130 ∼ 560 1300 ∼ 5600 M22(H), M24(S) 83 x 19 995 4
0.35
RSP38Nx17 9 ∼ 42 90 ∼ 420 M10 27.4 x 9 280 SP67Nx33.3 13 ∼ 67 130 ∼ 670 ー 57 x 11 335 0.5
SP67Nx17 13 ∼ 67 130 ∼ 670 45 x 10 320 0.5 SP220Nx34 45 ∼ 220 450 ∼ 2200 plumbing 67 x 15 590 1.4
M10(H), M12(S)
RSP67Nx17 14 ∼ 73 140 ∼ 730 28.9 x 12 350 0.45 SP420Nx34 ー
90 ∼ 420 900 ∼ 4200 78 x 18 840 3.3
SP120Nx17 24 ∼ 120 240 ∼ 1200 M12(S, H) 45 x 11 390 0.75 SP420Nx35 ー
RSP120Nx17 25 ∼ 100 250 ∼ 1270 ー 29.4 x 12 417 0.8 SP220Nx36 45 ∼ 220 450 ∼ 2200 Air conditioner(3/4 R410A) 72 x 15 590 1.4
SP67Nx18 13 ∼ 67 130 ∼ 670 45 x 10 320 0.5 SP420Nx36 90 ∼ 420 900 ∼ 4200 ー 78 x 18 840 3.3
M12
RSP67Nx18 14 ∼ 73 140 ∼ 730 29.6 x 12 350 0.45 SP560Nx36 130 ∼ 560 1300 ∼ 5600 M24, M27(S) 87 x 19 1000 4
SP120Nx18 24 ∼ 120 240 ∼ 1200 M12(H) 51 x 11 395 0.75 SP160Nx41 30 ∼ 160 300 ∼ 1600 ー 70 x 15 455 0.95
RSP120Nx18 25 ∼ 100 250 ∼ 1270 ー 30.6 x 12 420 0.8 SP310Nx41 ー 81 x 15
65 ∼ 310 650 ∼ 3100 665 2
SP2Nx19 0.4 ∼ 2 4 ∼ 20 ー SP310Nx46 ー 86 x 15
29 x 8 195 0.15
SP8Nx19 1.5 ∼ 8 15 ∼ 80 ー SP560Nx46 ー 97 x 19 1005
130 ∼ 560 1300 ∼ 5600 4.5
SP38Nx19 8 ∼ 38 80 ∼ 380 ー 38 x 8 255 0.35 SP560Nx55 ー 104 x 19 1010
SP67Nx19 13 ∼ 67 130 ∼ 670 45 x 10 320 0.5 Note 1. Use a torque wrench tester for setting torque or request torque setting when ordering.
M12 2. Please specify model name and required set torque when ordering.
RSP67Nx19 14 ∼ 73 140 ∼ 730 29.8 x 12 350 0.45
Example SP38Nx10x30N.m
SP120Nx19 24 ∼ 120 240 ∼ 1200 51 x 11 395 0.75 SP38Nx10x300kgf.cm
RSP120Nx19 25 ∼ 127 250 ∼ 1270 31.8 x 13 420 0.8 3. Inch size width models are available upon request. Confirm to us desired inch size.
M12(H), M14(S)
SP160Nx19 30 ∼ 160 300 ∼ 1600 52 x 13 440 0.95
RSP160Nx19 32 ∼ 170 320 ∼ 1700 32.8 x 13 470 0.9
SP220Nx19 45 ∼ 220 450 ∼ 2200 M14(S, H) 60 x 15 575 1.4
SP19Nx21 3.5 ∼ 19 35 ∼ 190 ー 35 x 8 220 0.2
SP67Nx21 13 ∼ 67 130 ∼ 670 plumbing 45 x 10 325 0.5
SP120Nx21 24 ∼ 120 240 ∼ 1200 51 x 11 395 0.75
M14
RSP120Nx21 25 ∼ 127 250 ∼ 1270 35.2 x 13 420 0.8
SPLS38N × 17
Accuracy ± 3%
DIMENSION [mm] WEIGHT DIMENSION [mm] WEIGHT DIMENSION [mm] WEIGHT DIMENSION [mm] WEIGHT
S.I.MODEL S.I.MODEL S.I.MODEL S.I.MODEL
L [kg] L [kg] L [kg] L [kg]
SPLS8NX7 SPLS38N-1×10 53 SPLS160N×19 RSPLS8N×8
40 0.33
SPLS8NX8 SPLS38N-2×10 55 0.53 SPLS160N×21 RSPLS8N×10
SPLS8NX9 20 0.32 SPLS38N-3×10 53 SPLS160N×22 RSPLS19N×8
178 1.11 0.37
SPLS8NX10 SPLS67N×14 SPLS160N×24 RSPLS19N×10 53
SPLS8NX12 SPLS67N×16 SPLS160N×26 RSPLS19N×13 0.4
SPLS19NX10 SPLS67N×17 SPLS160N×27 RSPLS38N×10
75
SPLS19NX12 33 0.35 SPLS67N×18 112 SPLS220N×19 RSPLS38N×12
284 0.49
SPLS19NX13 SPLS67N×19 SPLS220N×22 RSPLS38N×13 76
SPLS19N×14 33 SPLS67N×21 SPLS220N×24 RSPLS38N×14
75
SPLS19N×17 0.35 SPLS67N×22 0.63 SPLS220N×27 RSPLS38N×17 0.55
40
SPLS19N×21 SPLS67N×24 SPLS220N×29 289 1.62 RSPLS67N×14 138
SPLS19N-1×10 SPLS67N×27 115 SPLS220N×30 RSPLS67N×17 0.63
Torque Wrench
137
SPLS19N-2×10 38 0.37 SPLS67N×29 SPLS220N×32 RSPLS67N×19
SPLS19N-3×10 SPLS67N×30 SPLS220N×34 RSPLS120N×17
291 0.97
SPLS38N×8 SPLS67N×32 117 SPLS220N×36 RSPLS120N×19 151
SPLS38N×9 SPLS67N×33.3 SPLS310N×22 RSPLS120N×22 1.02
284
SPLS38N×10 SPLS120N×14 131 0.96 SPLS310N×24 RSPLS160N×19
SPLS38N×12 SPLS120N×17 SPLS310N×27 RSPLS160N×22 203 1.17
SPLS38N×13 55 SPLS120N×18 SPLS310N×30 289 2.17 RSPLS160N×24
SPLS38N×14 SPLS120N×19 SPLS310N×32 RSPLS220N×22
0.5 1.67
SPLS38N×16 SPLS120N×21 131 0.96 SPLS310N×41 RSPLS220N×24 316
304
SPLS38N×17 SPLS120N×22 SPLS310N×46 RSPLS220N×27 1.65
SPLS38N×19 SPLS120N×23 RSPLS310N×24
SPLS38N×22 SPLS120N×24 RSPLS310N×27 319 2.17
SPLS38N×24 65 RSPLS310N×30
SPLS38N×27
Note 1. For specifications, refer to basic models (QSP, CSP, QRSP, SP, RSP,
SP-N). THRUSTRING TOOL FOR SP POKA Patrol
2. Standard curl cord can be extended to about 2m in full extension.
PART#
311
TOOL No.
A-2
APPLICABLE MODELS
SP2N ∼ 19N, QSP12N / CSP
QSP25N / CSP, BQSP25N / BCSP
CNA-4mk2
SP38N, 67N, QSP50N ∼ 140N
312 A-3
BQSP50N ∼ 140N / BCSP
SP120N ∼ 310N, QSP200N ∼ 280N
313 A-4
BQSP200N, 280N / BCSP
SP-N
Notched Head Type Assembly Preset Notch Head
Preset Torque Wrench
Direction
Notched open head torque wrench for brake flare nut.
Accuracy ± 3%
S.I.CAPACITY METRIC CAPACITY NOMINAL MAX HAND DIMENSION
[N.m] [kgf.cm] SIZE FORCE [mm] WEIGHT
MODEL
[kg]
MIN. ∼ MAX. MIN. ∼ MAX. [mm] [N] L'
SP19N-1x10N
SP19N-3x10N
117.3
SP19N-4x10N 3.5 ∼ 19 35 ∼ 190 10 215 0.2
SP19N-1 × 10N SP19N-5x10N
SP19N-9x10N 116.6
SP38Nx14N 8 ∼ 38 80 ∼ 380 14 197.9 255 0.35
SPLS-N
Error-proofing (Pokayoke) torque wrench with limit switch
output to eliminate missed tightening.
Accuracy ± 3%
DIMENSION
WEIGHT
S.I.MODEL [mm]
[kg]
L
SPLS19N-1×10N
SPLS19N-3×10N
SPLS19N-4×10N
38 0.37
SPLS19N-5×10N
SPLS19N-8×10N
SPLS19N-9×10N
Common Specifications
Torque Wrench
999 data (Tightening Torque,1st angle value, 2nd angle Snug torque / tightening torque / max
Data Memory
value, 3rd angle value and final torque value) tightening torque / 1st, 2nd, 3rd angle
Other
Measurement Mode Single spindle/Production mode / 1st, 2nd, 3rd max angle / number
Functions
Data Output RS232C compliant of bolts / auto reset / judgement.
Zero Adjustment Auto zero (Angle, Torque) Setting through PC. Battery indicator.
Power Ni-MH rechargeable battery
Continuouse Use Approx, 20 hours with fully charged (8 hours by 1 hour recharging)
Recharging Time Approx. 3.5 hours
Temperature in Use [℃ ] 0 ∼ 40 no condensation
Note 1. The values in ( ) shows the lowest snug torque. Accuracy cannot be guaranteed for snug torque set beyond the
operative torque range.
2. Overall length does not include interchangeable head.
3. PH (Pipe wrench) type interchangeable head cannot be used with this model.
Standard Accessories Battery Pack (BP-5), QH interchangeable head, Quick battery charger (BP-3-100), Application PC software
WQL
Analog Torque and Assembly Dial Indicating Ratcet Head Torque Graduation Angle Direct Reading
Angle Wrench
Direction
Manual angle torque wrench with snug and angle setting
functions.
Accuracy ± 3%
CAPACITY CAPACITY ANGLE DIMENSION CAPACITY
[N • m] METRIC SCALE [mm] AMERICAN [Ibf • in][Ibf • ft]
S.I. MODEL [kgf • cm/kgf • m]
MODEL MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. ANGLE GRAD. MAX. L' MIN. ∼ MAX.
WQL50N (5) 10 ∼ 50 0.5 450WQL3 (50) 100 ∼ 500 kgf • cm 275 450WQL3-A 100 ∼ 400 lbf • in
WQL100N4 (10) 20 ∼ 100 1 900WQL4 (100) 200 ∼ 1000 349.7 900WQL4-A 15 ∼ 75 lbf • ft
WQL200N4 (30) 40 ∼ 200 1800WQL4 (300) 400 ∼ 2000 2° 360° 502.5 1800WQL4-A 30 ∼ 150
WQL280N (30) 40 ∼ 280 2 2800WQL3 (3) 4 ∼ 28 kgf • m 703 2800WQL3-A 30 ∼ 200
WQL420N (40) 60 ∼ 420 4200WQL2 (4) 6 ∼ 42 1000.5 4200WQL2-A 30 ∼ 300
WQL100N4 Note The values in ( ) shows the lowest snug torque. Accuracy of snug torque below minimum capacity is not guaranteed.
2. Please choose a socket with width which matches your bolt size, and purchase it together with the torque wrench.
COMPOSITION STANDARD TYPE LONG TYPE
Standard Hex key
BODY 1 1 Accessories
Socket 1 1
Socket Adapter Standard Type 1 −
Socket Adapter Long Type
Marker
−
1
1
1
SOCKET MARKER CARTRIDGE
MODEL WIDTH PART# APPLICABLE MODELS MODEL PART# COLOR
SOCKET 4MH-12 12 701 MARKER MK52R 780 RED
SOCKET 4MH-13 13 702 MARKER MK52B 781 BLUE
How to Order: SOCKET 4MH-14 14 703 MARKER MK52 782 (Empty)
17 L × MPQL100N4 − MK92 + 772 SOCKET 4MH-16 16 704 MARKER MK92R 783 RED
SOCKET 4MH-17 17 705 MPQL50N MARKER MK92B 784 BLUE
Refill ink MPQL100N4
Long SOCKET 4MH-18 18 706 MARKER MK92 785 (Empty)
Model Marker head MPQL140N
type SOCKET 4MH-19 19 707 MPQL200N4 Note1 : MK92 cannot be used with the socket size 12 - 16mm.
Width across SOCKET 4MH-21 21 708 Note2 : 780, 781, 783 and 784 are rubber tip.
flats SOCKET 4MH-22 22 709 782 and 785 are felt tip.
SOCKET 4MH-24 24 710
SOCKET 4MH-27 27 711
SOCKET 6MH-22 22 720
SOCKET 6MH-24 24 721
MQL280N
SPARE INK, SOLVENT
SOCKET 6MH-27 27 722
COLOR PART#
SOCKET 6MH-30 30 723
RED 770
BLUE 771
WHITE 406
YELLOW 772
SOCKET ADAPTER Solvent for R / B 790
MODEL PART# APPLICABLE MODELS Solvent for W / Y 791
ADAPTER 17L 748
MPQL50 ∼ 200N4
ADAPTER 17S 749
ADAPTER 21L 751
MQL280N
ADAPTER 21S 752
Note 749 and 752 are standard type.
748 and 751 are long type.
Long type is 100mm longer than Standard type.
CMQSP
Marking Torque Assembly Preset Ratchet Head Quick Drying Ink
Wrench
Direction
Marking torque wrench for cap screw tightening.
Accuracy ± 3%
CAPACITY MAX HAND DIMENSION
HEX KEY SIZE WEIGHT
S.I. MODEL [N・m] FORCE [mm]
[kg]
MIN. ∼ MAX. Width across flat Basic dimension L1 [N] L'
CMQSP-M6 5 ∼ 25 5 37 140
CMQSP-M8 249 0.85
CMQSP-M8 10 ∼ 50 6 34 279
CMQSP-M10 20 ∼ 100 8 37.5 389 314 1.1
Marked bolt head CMQSP-M12 30 ∼ 140 10 38 444 379 1.2
Components: Torque wrench, hex wrench × 2pc (1pc for spare), marker head, marker case, hex wrench adjusting tool, instruction manual.
Samples)QL/QLE, CL/CLE, TiQL/TiQLE, PQL, QRSP, PCL, QSP, CSP, SP/RSP, SP-N, AUR, A/AC
LS
(Wired)
QLLS100N4
Torque Verification
Wired Counter
Torque Wrench
SPLS38N × 17
CNA-4mk2
(Count checker)
ACLS100N
FH
(Wireless) Wired
+
QLLS100N4
T-FH256MC-LS
Conversion of LS-type torque wrench to
FH-Wireless torque wrench.
QLFH100N4
Wireless
HATFH R-FH256
Receiver
Marking
MPQL100N4
Oversight preventable
by quick visual check
on the bolt
CMQSP-M8
QLLS100N4 SPLS38N × 17
Limit Switch
AC30V Below 1A
DC30V Below 1A
Specifications
Torque Wrench
Note 1. For specifications, refer to basic models (QL, CL, PQL, PCL, TiQL).
2. Standard curl cord can be extended to about 2 m in full extension.
Specifications
DIMENSION DIMENSION DIMENSION DIMENSION
[mm] WEIGHT [mm] WEIGHT [mm] WEIGHT [mm] WEIGHT
S.I. MODEL S.I. MODEL S.I. MODEL S.I. MODEL
[kg] [kg] [kg] [kg]
L L L L
QSPMS12N4 32 0.32 SPLS19N×14 33 SPLS120N×17 RSPLS8N×8
40 0.33
QSPLS25N3 34 0.37 SPLS19N×17 0.35 SPLS120N×18 RSPLS8N×10
40
QSPLS50N3 49 0.57 SPLS19N×21 SPLS120N×19 RSPLS19N×8
0.37
QSPLS100N4 81 0.8 SPLS19N-1×10 SPLS120N×21 131 0.96 RSPLS19N×10 53
QSPLS140N3 101 0.9 SPLS19N-2×10 38 0.37 SPLS120N×22 RSPLS19N×13 0.4
QSPLS200N4 179 1.47 SPLS19N-3×10 SPLS120N×23 RSPLS38N×10
75
QSPLS280N3 249 2.57 SPLS38N×8 SPLS120N×24 RSPLS38N×12
0.49
QSPLS420N 449 3.87 SPLS38N×9 SPLS160N×19 RSPLS38N×13 76
SPLS38N×10 SPLS160N×21 RSPLS38N×14
75
DIMENSION SPLS38N×12 SPLS160N×22 RSPLS38N×17 0.55
WEIGHT 178 1.11
S.I. MODEL [mm] SPLS38N×13 55 SPLS160N×24 RSPLS67N×14 138
[kg]
L SPLS38N×14 SPLS160N×26 RSPLS67N×17 0.63
0.5 137
CSPMS12N4X8D 50 SPLS38N×16 SPLS160N×27 RSPLS67N×19
0.32
CSPLS25N3X10D 59 SPLS38N×17 SPLS220N×19 RSPLS120N×17
284 0.97
CSPLS50N3X12D 79 SPLS38N×19 SPLS220N×22 RSPLS120N×19 151
0.5
CSPLS50N3X15D 89 SPLS38N×22 SPLS220N×24 RSPLS120N×22 1.02
CSPLS100N3X15D 121 SPLS38N×24 65 SPLS220N×27 RSPLS160N×19
0.74
CSPLS140N3X15D 136 SPLS38N×27 SPLS220N×29 289 1.62 RSPLS160N×22 203 1.17
CSPLS200N3X19D 224 1.37 SPLS38N-1×10 53 SPLS220N×30 RSPLS160N×24
CSPLS280N3X22D 309 2.17 SPLS38N-2×10 55 0.53 SPLS220N×32 RSPLS220N×22
1.67
CSPLS420NX22D 499 3.87 SPLS38N-3×10 53 SPLS220N×34 RSPLS220N×24 316
291
SPLS67N×14 SPLS220N×36 RSPLS220N×27 1.65
DIMENSION SPLS67N×16 SPLS310N×22 RSPLS310N×24
WEIGHT 284
S.I. MODEL [mm] SPLS67N×17 SPLS310N×24 RSPLS310N×27 319 2.17
[kg]
L SPLS67N×18 112 SPLS310N×27 RSPLS310N×30
QRSPLS38NX17 94 SPLS67N×19 SPLS310N×30 289 2.17
QRSPLS38NX19 95 0.57 SPLS67N×21 SPLS310N×32 DIMENSION
SPLS67N×22 0.63 SPLS310N×41 [mm] WEIGHT
QRSPLS38NX21 97 S.I. MODEL
304 [kg]
QRSPLS38NX24 99 0.6 SPLS67N×24 SPLS310N×46 L
SPLS67N×27 115 SPLS19N-1×10N
DIMENSION SPLS67N×29 SPLS19N-3×10N
[mm] WEIGHT SPLS67N×30
S.I. MODEL SPLS19N-4×10N
[kg] 38 0.37
L SPLS67N×32 117 SPLS19N-5×10N
SPLS8NX7 SPLS67N×33.3 SPLS19N-8×10N
SPLS8NX8 SPLS120N×14 131 0.96 SPLS19N-9×10N
SPLS8NX9 20 0.32
SPLS8NX10
SPLS8NX12
SPLS19NX10
SPLS19NX12 33 0.35
SPLS19NX13
Note 1. For specifications, refer to basic models (QSP, CSP, QRSP, SP, RSP, SP-N).
2. Standard curl cord can be extended to about 2m in full extension.
3. The curl cord length of SPLS19N-8x10N is about 5m in full extension.
Transmitter
T-FH256MC
MODEL DESCRIPTION
T-FH256MC Transmitter for FH256MC
T-FH256MC-LS Transmitter for LS-type wrench
Torque Wrench
T-FH256MCLS is a part to install transmitter on your LS torque wrench.
Receiver
Simultaneous transmission capabilities for 256 groups.
MODEL DESCRIPTION
No-Voltage contact output (1a)
W150 × D210 × H51 (mm)
R-FH256
Weight: 1.7Kg
Power: AC100V-240V, 47-63Hz
Setting Box
Without removing the transmitter on the torque wrench or removing the receiver panel, ID can be set
easily by wireless Setting Box.
MODEL DESCRIPTION
Input: RS232C
SB-FH256
Power: AC100V-240V, 47-63Hz
*Equipped with Dipole antenna
I/O-FH256
ANTENNA EXTENSION CORD
Extends antenna from R-FH256 receiver to improve communication conditions.
MODEL APPLICABLE MODEL / SPEC
FH-COD R-FH256 / CABLE LENGTH: about 9.5m
PROTECTION COVER
Put it on the transmitter (T-FH256) to protect from physical damage.
MODEL APPLICABLE MODEL / SPEC
FH-PCV T-FH256MC, T-FH256MC-LS / MATERIAL: Silicon
Note 1 : FHSS (Frequency Hopping Spread Spectrum) technology decreases interference and increases signal capacity.
FH-MHD Note 2 : The transmitting/receiving distance is approx. 10m to 20m. Consult Tohnichi for optimal conditions.
Note 3 : FH256MC is available on any type of "Click" wrench: QL, CL, CSP, QSP, SP, RSP etc. (except MS-type)
Note 4 : Conversion of LS type torque wrenches to FH256MC is available. Consult TOHNICHI for more information.
Note 5 : Create a ERROR PROOF system by connecting receiver to Model CNA-4Mk2 Count Checker (optional).
Note 6 : This product may require license for radio wave regulations from the local authorities, depending on the county/region. Consult
TOHNICHI for more information.
FH-PCV
CNA-4mk2
POKA Patrol Torque Verification Counter
• Manages Signals from LS or FM Torque Wrenches
• Special Version with FM Receiver Available
COUNT DISPLAY 2 digit, 7 segment LED
OK, NG CONFORMITY Domed shape lamp (OK: Green/ NG: Red )
COUNT ENTERING PORT Max. 4
PRESET MAX VALUE 99 (Free setting by Key entering)
SELECT FUNCTION Max. 4 Work piece (Free setting by Key entering)
Judge by Preset value or End signal
OK, NG JUDGMENT
Automatically judgment timer (1 ∼ 300 sec. )
OK: Green lamp
NG: Red lamp + Buzzer (4 perttern)
OK, NG OUTPUT
OK and NG respectively relay contacts
(Relay output rating: DC30V 1A, AC125V 0.5A)
Normal mode (same as the previous model)
MODE EXCHANGE
Multiple mode (Max. 4 pcs torque wrench usable)
POWER SUPPLY AC100V - 240V 50/60HZ
■ PC CONNECTING CABLE
PART # APPLICABLE MODELS TYPE
ACCESSORIES
■ QUICK CHARGER ■ BATTERY PACK
PART # APPLICABLE MODELS TYPE PART # APPLICABLE MODELS TYPE
BC-3-100 CEM3/CEM3-P
(100-120V) BP-3 CTA/CTA-P, CTB
BC-3-200 (200-240V)
■ BATTERY PACK
PART # APPLICABLE MODELS TYPE PART # APPLICABLE MODELS TYPE
Torque Wrench
10 1
DBE850N 100 ∼ 850 8500DBE2-S 10 ∼ 85 680 1360 6.1 - -
DBE1000N 100 ∼ 1000 10000DBE2-S 10 ∼ 100 741 1490 6.4 DB800F-8AS 0 ∼ 800
DBE1400N 200 ∼ 1400 14000DBE2-S 20 ∼ 140 875 1740 8.6 DB1000F-8AS 0 ∼ 1000
20 2
DBE2100N 200 ∼ 2100 21000DBE2-S 20 ∼ 210 1050 2140 12.8 DB1500F-8AS 0 ∼ 1500
DBE2800N 300 ∼ 2800 28000DBE2-S 30 ∼ 280 1250 2380 16.8 DB2000F-12AS 0 ∼ 2000
DBR4500N 500 ∼ 4500 50 45000DBR-S 50 ∼ 450 5 3750 1285 24.5 DB3000F-12AS 0 ∼ 3000
DBE700N [L' = 1260( ㎜ )]
DBR6000N 600 ∼ 6000 60000DBR-S 60 ∼ 600 4000 1585 25.5 - -
Note 1. Overall dimension is same with or without a memory pointer.
2. DB25N ∼ DB280N comes with resin grips.
3. DBR requires mechanical loading with lever lock or winch.
CDB-S
Interchangeable Head Inspection Dial Indicating Interchangeable Direct Reading Memory Pointer
Type Dial Indicating
Direction Torque Wrench Dial-indicating torque wrench with interchangeable head.
Accuracy ± 3%
CAPACITY CAPACITY MAX. HAND DIMENSION INTER‒ CAPACITY
[N • m] METRIC [kgf • cm/kgf • m] FORCE [mm] WEIGHT AMERICAN [Ibf • in/Ibf • ft]
S.I. MODEL CHANGEABLE
MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L' HEADS MIN. ∼ MAX.
CDB14N4 × 8D-S [L' = 215( ㎜ )] CDB7N4x8D-S 0.7 ∼ 7 0.1 70CDB4-S 7 ∼ 70 kgf • m 0.1 31.8 SH,RH, 8D 70CDB4-A-S 6 ∼ 60
lbf·in
CDB100N × 15D-S [L' = 415( ㎜ )] CDB100Nx15D-S 10 ∼ 100 1 1000CDB-S 100 ∼ 1000 1 256.4 415 0.76 ( SH,RH,RQH,
QH,DH,HH )
15D 1000CDB-A-S 7 ∼ 70 lbf·ft
CDB200Nx19D-S 20 ∼ 200 2 2000CDB-S 200 ∼ 2000 1 388.3 525 1 ( SH,RH,RQH, 19D 2000CDB-A-S
QH,DH,HH )
14 ∼ 140
kgf • m
CDB300Nx22D-S 30 ∼ 300 3000CDB-S 3 ∼ 30 413.8 720 1.65 RH,RQH, 22D 3000CDB-A-S 20 ∼ 220
CDB420Nx22D-S 40 ∼ 420
5
4200CDB-S 4 ∼ 42
5
454.1 920 2.7 ( SH,
QH,DH,HH ) 4200CDB-A-S 30 ∼ 300
Note 1. Overall length does not include interchangeable head.
2. PH (Pipe wrench) type interchangeable head cannot be used for this model.
3. CDB25N - CDB200N come with a resin grip.
SCDB-S
European Style Inspection Dial Indicating Interchangeable Direct Reading Memory Pointer
Interchangeable
Direction Head Type Dial Dial-indicating torque wrench with DIN interchangeable
Indicating Torque head connector.
Accuracy ± 3%
S.I. CAPACITY HEAD DIMENSION
[N • m] SIZE [mm] WEIGHT
MODEL
[kg]
MIN. ∼ MAX. GRAD. [mm] L
SCDB25N-9x12-S 3 ∼ 25 9x12 271 0.48
0.5
SCDB50N-9x12-S 5 ∼ 50 9x12 342 0.53
SCDB100N-9x12-S 10 ∼ 100 1 9x12 422 0.76
SCDB5N-S SCDB200N-14x18-S 20 ∼ 200 2 14x18 535 1
Note 1. Overall length does not include interchangeable head.
2. Applicable to European Style head only. TOHNICHI interchangeable head cannot be used.
kgf·cm
F560N 100 ∼ 560 10 5600F 1000 ∼ 5600 945 4.0 5600F-A 50 ∼ 400
100 677
F700N 100 ∼ 700 7000F 1000 ∼ 7000 1175 6.0 7000F-A 50 ∼ 500
kgf·m
F850N 100 ∼ 850 8500F 10 ∼ 85 680 1410 7.8 8500F-A 60 ∼ 600
20 2
F1000N 100 ∼ 1000 10000F 10 ∼ 100 686 1640 8.5 10000F-A 70 ∼ 700
FR1050N 100 ∼ 1050 10500FR 10 ∼ 105 1340 835 8 10500FR-A 100 ∼ 750
20 2
FR1400N 200 ∼ 1400 14000FR 20 ∼ 140 1510 981 11.5 14000FR-A 100 ∼ 1000
FR2100N 300 ∼ 2100 21000FR 30 ∼ 210 1940 1148 14.5 21000FR-A 200 ∼ 2000
50 5
FR2800N 300 ∼ 2800 28000FR 30 ∼ 280 2320 1292 20 28000FR-A 200 ∼ 2000
FR4200N 400 ∼ 4200 42000FR 40 ∼ 420 3050 1460 28 42000FR-A 300 ∼ 3000
100 10
FR6000N 600 ∼ 6000 60000FR 60 ∼ 600 3960 1624 30 60000FR-A 400 ∼ 4300
Note 1. FR models are supplied on request.
2. FR require a winch of mechanical device for loading.
CSF/CF
Interchangeable Inspection Beam Interchangeable Direct Reading
Head Type Beam
Direction Type Torque Wrench Direct-reading beam-type torque wrench with
Interchangeable head.
Accuracy ± 3%
CAPACITY CAPACITY MAX HAND DIMENSION INTER- CAPACITY
[N • m] METRIC [kgf • cm/kgf • m] [mm] WEIGHT AMERICAN [lbf • in/lbf • ft]
S.I. MODEL FORCE CHANGEABLE
MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L' HEAD MIN. ∼ MAX.
CSF7N×8D 1∼7 0.2 70CSF 10 ∼ 70 kgf·cm 2 30 220 0.2 SH, RH, 8D 7070CSF-A 10 ∼ 60 lbf·in
CSF7Nx8D [L' = 220( ㎜ )] CSF14N×8D 2 ∼ 14 0.5 1400CSF 20 ∼ 140 5 55 250 0.25 QH, HH 140CSF-A 20 ∼ 120 ( )
SH, RH, QH, 10D
CF25N×10D 5 ∼ 25 1 250CF 50 ∼ 250 10 80 320 0.4 ( DH, HH ) 250CF-A 40 ∼ 220
CF150N×19D 20 ∼ 150
5
1500CF 200 ∼ 1500 50 310 480 1.3 ( SH,QH,RH,DH,RQH,
HH )
19D 1500CF-A 15 ∼ 110
kgf·m
CF230N×22D 30 ∼ 230 2300CF 3 ∼ 23 0.5 420 530 1.6 SH, RH, RQH, 22D 2300CF-A 20 ∼ 160
CF420N×22D 70 ∼ 420 10 4200CF 7 ∼ 42 1 570 725 3.1 ( QH, DH, HH )4200CF-A 30 ∼ 300
CF850N×32D 100 ∼ 850 20 8500CF 10 ∼ 85 2 670 1260 7.1 (SH, RH, QH) 32D 8500CF-A 60 ∼ 600
Note 1. Preset hook spanner (for RTD260CN and RTD500CN only).
2. Resin grip (for RTD120N and RTD260CN only).
QF/QFR
Ratchet Head Inspection Beam Ratchet Head Direct Reading
Beam Type Torque
Wrench For efficient bolt tightening operations in confined places
Direction
with ratcheting head.
Accuracy ± 3%
CAPACITY CAPACITY MAX. HAND DIMENSION CAPACITY
[N • m] METRIC [kgf • cm/kgf • m] MEMORY [mm] WEIGHT AMERICAN [lbf • in/lbf • ft]
S.I. MODEL FORCE
MODEL POINTER [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L' MIN. ∼ MAX.
QF60N 6 ∼ 60 1 600QF 60 ∼ 600 kgf·cm 10 155 455 0.8 600QF-A 0 ∼ 520 lbf·in
QF120N 10 ∼ 120 2 1200QF 100 ∼ 1200 20 269 520 1.2 1200QF-A 6 ∼ 86 lbf·ft
QF120N QF220N 30 ∼ 220 2200QF 300 ∼ 2200 436 580 1.8 2200QF-A 5 ∼ 160
5 50
QF320N 60 ∼ 320 3200QF 400 ∼ 3200 555 655 2.6 3200QF-A 40 ∼ 230
OPTION
QF420N 70 ∼ 420 4200QF 7 ∼ 42 kgf·m 0.5 568 830 3.4 4200QF-A 30 ∼ 300
QF560N 100 ∼ 560 10 5600QF 10 ∼ 56 950 4.3 5600QF-A 50 ∼ 400
1 677
QF700N 100 ∼ 700 7000QF 10 ∼ 70 1165 6.5 7000QF-A 50 ∼ 500
QF850N 100 ∼ 850 8500QF 10 ∼ 85 680 1400 8500QF-A 60 ∼ 600
8.5
QFR1050N 100 ∼ 1050 20 10500QFR 10 ∼ 105 2 1340 845 10500QFR-A 100 ∼ 750
QFR1400N 200 ∼ 1400 14000QFR 20 ∼ 140 1510 992 12.5 14000QFR-A 100 ∼ 1000
QFR2100N 300 ∼ 2100 21000QFR 30 ∼ 210 1940 1158 15.5 21000QFR-A 200 ∼ 1500
50 5 WITH
QFR2800N 300 ∼ 2800 28000QFR 30 ∼ 280 2320 1305 21 28000QFR-A 200 ∼ 2000
QFR4200N 400 ∼ 4200 42000QFR 40 ∼ 420 3050 1473 30 42000QFR-A 300 ∼ 3000
100 10
QFR6000N 600 ∼ 6000 60000QFR 60 ∼ 600 3960 1624 32 60000QFR-A 400 ∼ 4300
Note Memory pointer is optional for QF60N ∼ QF850N, and equipped as standard for all QFR models.
Torque Wrench
7 segments LED 4 lines 10mm CEM3-P standard software general discriptions
14 segments LCD 3 lines 7mm Portion Memory Max. 100 parts (Part name, number of screws, tightening direction, high / low torque, measuring order.)
Display 7 segments LED 4 lines 3mm
Measurement Data Up to 3,000 screw data (vary depending on parts registered), measurement part name, measured value,
Battery Life Indicator ( 4 steppes ) Storage pass / fail judgement, measurement time and data.)
Judgement LED RED / BLUE
Number of Data Memory 999 (M-2 mode: 99 data)
RS232C ( 2400-19200bps ) MODEL MODEL MODEL
Communication
Functions CEM10N3 × 8D-P CEM100N3 × 15D-P CEM500N3 × 22D-P
Serial output corresponding to a USB connecter
CEM20N3 × 10D-P CEM200N3 × 19D-P CEM850N3 × 32D-P
Power Supply Ni-MH rechargeable battery
CEM50N3 × 12D-P CEM360N3 × 22D-P
Continuous Use Approx 20 hrs with fully charged ( 8 hrs by 1 hour recharging )
Recharging Time Approx 3.5 hrs
Operation Temperature[℃ ] 0 ∼ 40 no condensation
Peak Hold
Auto Memory & Resetting ■ CEM3 / CEM3-P OPTIONS
Tightening Completion Buzzer
Basic Functions Judgement of Measured Data
Auto Zero setting
BATTERY PACK CONNECTING CABLE
Auto Off ( 3 min ) PART # APPLICABLE MODELS PART # APPLICABLE MODELS
Clock BP-5 CEM3, CEM3-P, CTA2 379 CEM2, CEM3 (-P), CTA2, R-DT999 → EPP16M2
575 CEM2, CEM3 (-P), CTA2, R-DT999 → PC (D-SUB 9pin FEMALE)
BATTERY CHARGER 584 CEM3, CEM3-P, CTA2, R-DT999 → PC (USB A TYPE)
MODEL DESCRIPTION
BC-3-100 100V
DFS Data Filling System
BC-3-200 200 ∼ 240V Software Program
Media Basic Requirement
PRINTER OS: Microsoft Windows 98, 2000, XP
CD-ROM
PART # Memory: More than 64MB
EPP16M2
CTB
Digital Retightening Wrench Inspection Digital Interchangeable Signal Re-Chargeable
Direction
Detects the original tightened torque applied on the bolt
by re-tightening inspection.
Accuracy ± 1%
S.I METRIC AMERICAN MAX HAND DIMENSION
STANDARD -M -I(lbf.in) , -F(lbf.ft) FORCE [mm] WEIGHT ACCESSORY INTERCHANGEABLE
MODEL
[kg] PROVIDED HEADS
MIN ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] L'
CTB100x15D [L’
=433(mm)] CTB20x10D 4 ∼ 20 N·m 0.02 40 ∼ 200 kgf·cm 0.2 36 ∼ 180 lbf·in 0.2 83 295 0.6 QH10D (SH, SH-N, RH, QH, DH, HH)10D
CTB50x12D 10 ∼ 50 0.05 100 ∼ 500 0.5 100 ∼ 450 0.5 152 360 0.7 QH12D (SH, RH, RQH, QH, DH, HH)12D
CTB100x15D 20 ∼ 100 0.1 200 ∼ 1000 1 200 ∼ 900 1 244 433 0.8 QH15D (SH, RH, RQH, QH, DH, HH)15D
CTB200x19D 40 ∼ 200 0.2 400 ∼ 2000 2 30 ∼ 150 lbf·ft 0.2 409 500 1.1 QH19D (SH, RH, RQH, QH, DH, HH)19D
CTBE500x22D [L’
=912(mm)] CTB360x22D 72 ∼ 360 0.4 720 ∼ 3600 4 52 ∼ 260 0.4 481 743 1.6
kgf·m QH22D (SH, RH, RQH, QH, DH, HH)22D
CTBE500x22D 100 ∼ 500 0.5 10 ∼ 50 0.05 72 ∼ 360 0.5 549 912 3.5
CTBE850x32D 170 ∼ 850 1 17 ∼ 85 0.1 124 ∼ 620 1 608 1383 4.9 QH32D (SH, RH, QH) 32D
W
C
C
W
m
W
C
ℓ1 ℓ1
ℓ1 市販六φ角棒スパナ MODEL PIPE WRENCH APPLICABLE TUBE DIA.
(Head Size x Width) NOMINAL SIZE PIPE OUT DIA(mm) (mm)
t
t
φd2
Insert Hex wrench
t
PH15D x 350 350 13 ∼ 38 25.5
QH15D RQH15D × 17 DH15D to use.
CSP<LS>50N3x15D,CSP<LS>100N3x15D,CSP<LS>140N3x15D
PH19D x 350 350 13 ∼ 38 25.5
APPLICABLE MODEL ALLOWABLE OUTSIDE ALLOWABLE OUTSIDE
SIZE, MODEL THICKNESS MODEL THICKNESS SQUARE DRIVE OUTSIDE WIDTH THICKNESS MODEL ALLOWABLE OUTSIDE WIDTH THICKNESS CSP<LS>200N3x19D
CL. PCL. CDB. CSP. BCSP. TORQUE WIDTH TORQUE WIDTH MODEL PH22D x 350 350 13 ∼ 38 25.5
INLET (Head Size x width) T(mm) (Head Size x width) T(mm) a(mm) C(mm) t(mm) (Head Size x Width) TORQUE(N・m) C(mm) t(mm)
CEM3. CTA. CTB CSF. CF. YCL. (N・m) C(mm) (N・m) C(mm) PH22D x 450 450 26 ∼ 52 39
CL1.5N4x8D CSP1.5N4x8D SH 8 D × 5.5 1.5 13 3 RH 8 D × 5.5 1.5 10.5 QH8D 6.35 23 17.5 HH8D 12 14.5 CSP<LS>280N3x22D,CSP<LS>420nx22D
5
CL3N4x8D CSP3N4x8D SH 8 D × 6 2.5 15 3.5 RH 8 D × 6 2.4 11 PH32D x 450 450 26 ∼ 52 39
CL6N4x8D CSP6N4x8D SH 8 D × 7 3.5 17 4 RH 8 D × 7 3.6 12
6
PCL6N4x8D SH 8 D × 8 7 20 4.5 RH 8 D × 8 7.2 13.5
CDB7N4x8D-S SH 8 D × 10 25 RH 8 D × 10 12.2 15.5
CSF7Nx8D SH 8 D × 11 27 RH 8 D × 11 17
5.5 7
CEM10N3x8D(-P) SH 8 D × 12 RH 8 D × 12 14 18
8D CL<MS>12N4x8D
PCL12N4x8D
CDB14N4x8D-S
CSP<MS>12N4x8D
CSF14Nx8D
SH 8 D × 13
SH 8 D × 14
SH 8 D × 16 14
29
31
RH 8 D × 13 19 HH8D
HH8D is available
SH-N NOTCHED OPEN HEAD
SH 8 D × 17 32 only 6.35 hex bit.
SH 8 D × 19 35 6.5
SH 8 D × 21 36
SH 8 D × 22 37
SH 8 D × 24 39 CL<LS>25Nx10D CDB25Nx10D-S CF25Nx10D
YCL12Nx10D SH10D × 7 RH10D × 8 7.2 12.5 6 QH10D 9.5 26 22 HH10D x 5 11 CL25Nx10D-MH CEM20N3x10D(-P) YCL12Nx10D
CEM20N3x10D(-P) SH10D × 8 RH10D × 10 12.2 15.5 7 HH10D x 6 12 8 PCL<LS>25Nx10D YCL23Nx10D
CTB20x10D 20 28
SH10D × 10 RH10D × 11 20 17 HH10D x 8 15
YCL23Nx10D SH10D × 11 RH10D × 12 18 MODEL ALLOWABLE OUTSIDE WIDTH THICKNESS
CDB25Nx10D-S SH10D × 12 RH10D × 13 19 (Head Size x Width) TORQUE(N・m) C(mm) t(mm)
CL<LS>25Nx10D CSP<LS>25N3x10D SH10D × 13 32 RH10D × 14 20
SH10D-1 x 10N 12
CL25Nx10D-MH BCSP25N3x10D SH10D × 14 RH10D × 16 22 22.5
10D PCL<LS>25Nx10D CF25Nx10D 6.5 8 SH10D-3 x 10N
SH10D × 16 RH10D × 17 25 24 DH10D 9.5 18 22.5 15
SH10D-5 x 10N 19 24
SH10D × 17 RH10D × 18 25
25 SH10D-4 x 10N
SH10D × 18 RH10D × 19 26 22.5 10
39 SH10D-9 x 10N
SH10D × 19 RH10D × 21 28
Accessories
Accessories
SH10D × 21 RH10D × 22 29
SH10D × 22
SH10D × 24 43
YCL45Nx12D SH12D × 8 7 20 RH12D × 8 7.2 15 QH12D 9.5 32 25.5 HH12D x 5 11
5 5
CDB50Nx12D-S SH12D × 10 12 24 RH12D × 10 12.2 16 HH12D x 6 14
- 10
CL<LS>50Nx12D
CL50Nx12D-MH
PCL<LS>50Nx12D
CSP<LS>50N3x12D
BCSP50N3x12D
CF50Nx12D
SH12D × 11
SH12D × 12
SH12D × 13
20.5
29.5
28
31
32
5.5
6.5
RH12D × 11
RH12D × 12
RH12D × 13
20
29.5
18
20
21
5.5
6.5
RQH12D x 12 - 32 24.1
HH12D x 8
HH12D x 10
15
17 FHθ゜
L1
HOOK HEAD
CEM50N3x12D(-P) SH12D × 14 38 8 RH12D × 14 20 RQH12D x 14 - 32 24.1 L2
CTA50x12D(-P) 59 10 φd
SH12D × 16 59 RH12D × 16 24
12D 40 10
r
CTB50x12D
b
SH12D × 17 RH12D × 17
φD
25
YCL70Nx12D SH12D × 18 RH12D × 18 12 DH12D 9.5 18 22.5
SH12D × 19
41 11
RH12D × 19 70
26 FH
a
H
t
SH12D × 21 RH12D × 21 29
70 43 13
SH12D × 22 RH12D × 22 30
13 OUT DIA NOMINAL THICKNESS
SH12D × 24 48 MODEL r(mm) t(mm)
SH12D × 27 52 ADAPTING SIZE SIZE
CL<LS>50Nx15D CSP<LS>50N3x15D SH15D × 12 RH15D × 12 19 QH15D 12.7 37.5 33.5 HH15D x 8 14 FH15D x 30 30 ∼ 38 M20 16
29.5 7 6
CL50Nx15D-MH BCSP50N3x15D SH15D × 13 59 38 8 RH15D × 13 20.5 HH15D x 10 17 FH15D x 38 38 ∼ 45 M25 20
PCL<LS>50Nx15D - 13
SH15D × 14 RH15D × 14 22 RQH15D x 14 - 37.5 29 HH15D x 12 20 FH15D x 45 45 ∼ 52 M30 24
59 8 7
YCL90Nx15D SH15D × 16 RH15D × 16 25 HH15D x 14 21.5 FH15D x 52 52 ∼ 58 M35 27
CDB100Nx15D-S CF100Nx15D SH15D × 17 RH15D × 17 26 RQH15D x 17 - 37.5 29 FH15D x 58 58 ∼ 65 M40 31 8
100 10
CL<LS>100Nx15D CSP<LS>100N3x15D SH15D × 18 RH15D × 18 27
51 13
CL100Nx15D-MH BCSP100N3x15D SH15D × 19 RH15D × 19 28 DH15D 12.7 22 29
15D PCL<LS>100Nx15D SH15D × 21 RH15D × 21
31
CEM100N3x15D(-P) SH15D × 22 140 RH15D × 22
CTA100x15D(-P) 140 13
SH15D × 24 RH15D × 24 34
CTB100x15D SH15D × 26 RH15D × 27 37
CL<LS>140Nx15D CSP<LS>140N3x15D SH15D × 27 60 12 RH15D × 30 41
CL140Nx15D-MH BCSP140N3x15D SH15D × 30
PCL<LS>140Nx15D SH15D × 32
YCL140Nx15D
CF150Nx19D SH19D × 17 RH19D × 14 59 22.5 8 QH19D 12.7 45 33 HH19D x 10 17 FH19D x 65 65 ∼ 75 M45,M50 35.5 8
YCL180Nx19D SH19D × 18 200 RH19D × 17 27 10 HH19D x 12 21.5
100
CL<LS>200Nx19D CSP<LS>200N3x19D SH19D × 19 54 13 RH19D × 18 28 11 RQH19D x 17 - 45 28 HH19D x 14 - 23 13
CL200Nx19D-MH BCSP200N3x19D SH19D × 21 RH19D × 19 29 HH19D x 17 27
180 166
PCL<LS>200Nx19D SH19D × 22 RH19D × 21 RQH19D x 19 - 45 28 HH19D x 19 29
32 13
CEM200N3x19D(-P) SH19D × 24 RH19D × 22
CTA200x19D(-P) 200
19D SH19D × 27 60 15 RH19D × 24 35 RQH19D x 22 - 45 28
CTB200x19D SH19D × 30 180 RH19D × 27 39
CDB200Nx19D-S SH19D × 32 RH19D × 30 41 DH19D 12.7 24 29.5
200
SH19D × 34 200 RH19D × 32 44
76 11 15
SH19D × 36 RH19D × 34 47
SH19D × 41 180 RH19D × 36 49
RH19D × 41 55
CF230Nx22D SH22D × 19 RH22D × 19 166 30 QH22D 19 51 46.5 HH22D x 12 19.5 FH22D x 75 75 ∼ 85 M60,M65 39 8
280 63 14
CL<LS>280Nx22D CSP<LS>280N3x22D SH22D × 22 RH22D × 22 34 HH22D x 14 27 FH22D x 85 85 ∼ 98 M70,M75 45.5 10
255
CL280Nx22D-MH BCSP280N3x22D SH22D × 24 500 RH22D × 24 37 15 RQH22D x 22 - 51 35 HH22D x 17 - 30 17
CDB300Nx22D-S SH22D × 27 RH22D × 27 490 41 HH22D x 19 32
78
CEM360N3x22D(-P) SH22D × 30 420 RH22D × 30 44 RQH22D x 24 - 51 35 HH22D x 22 35
15
CTA360x22D(-P) SH22D × 32 RH22D × 32 45
CTB360x22D SH22D × 34 500 RH22D × 34 49 17 DH22D 19 34 43.5
22D 500
CDB420Nx22D-S
CL<LS>420Nx22D CSP<LS>420Nx22D
BCSP420Nx22D
SH22D × 36
SH22D × 41
SH22D × 46
420
280
85
RH22D × 36
RH22D × 41
RH22D × 46
51
57
62
Connecting dimensions for interchangeable heads
AH ADJUSTABLE HEAD
CF420Nx22D MODEL ℓ1 ℓ2 ℓ3 ℓ4 d3 d4 W
※ 8D 35 4 10 2 8 3.0 9
CEM500N3x22D(-P)
QH CTAE500x22D(-P) 10D 44 5 12 2.5 10 3.5 12
CTBE500x22D 12D 53 6 14 3 12 3.5 14
C
CLE550Nx27D SH27D × 22 255 65 14 RH27D × 22 255 14 QH27D 19 70 49.7 MODEL INNER WIDTH(mm) S S' L t-h
ℓ1 38 15D 63 7.5 17 3 15 4.5 17
CLE750Nx27D SH27D × 24 350 72 15 RH27D × 24 350 15 (Head Size x Width) min, STD, max (mm) (mm) (mm) (mm)
SH27D × 27 490 82 16 RH27D × 27 490 42 16 DH27D 19 42 44.5 19D 80 9.5 21 3 19 4.5 21
h
φd4 ALLOWABLE
h
d3H10
0.04
0.2
DH CTBE850x32D SH32D × 34 RH32D × 34 52 AH15D x 24 10 ∼ 50 50
W:
CLE850Nx32D SH32D × 36 RH32D × 36 53 AH15D x 30 20 ∼ 100 100
32D
CLE1200Nx32D SH32D × 41 110 24 RH32D × 41 59 24 ℓ3 ℓ4 AH15D x 36 30 ∼ 140 140
C
ℓ1 SH32D × 46 RH32D × 46 65
1200 1200 ALLOWABLE
SH32D × 50 RH32D × 50 69 27
h
□a 29
SH32D × 60 RH32D × 60 80
30 31
INTERCHANGEABLE BIT
INTERCHANGEABLE SOCKET RTD/RTDZ
BMRD FTD8N2-S ∼
SOCKET FOR HAND TOOL +PLUS BIT
⃝ MANUAL BMLD FTD16N2-S, (02FTD ∼
AMRD
− AMLD LTD2000CN −
INLET(FEMALE) 6.35 9.5 12.7 19.0 25.4 SOCKET FOR HAND TOOL (HAND TOOL) FTD50CN ∼ 400CN, (FTD8N ∼ 2FTD)
MTD
Width across flats(B) 2H 3H 4H 6H 8H FTD2CN-S ∼ 400CN2-S 16N)
⃝MINUS BIT
−
L STC
8 201
PNEUMATIC U30CN U(except U30CN) − − − − AUR5N
10 202 210
SIGN A B C D E F G H
12 203 211 BOX BIT
φ5.5 φ2 φ12
φD2
APPROX.48
φ3.8
φD1
13 204 212 φ4.4
⃝
⃝
φ3.5
−:APPROX.25
+:APPROX.28
APPROX.50
APPROX.185
14 213 220 HEX BIT 1
APPROX.20
0.2
APPROX.75
APPROX.50
APPROX.50
16 216 227
ROOT SHAPE
22
15
17 214 221
12
1
6
22
4
10
Width across flats B Inlet□a
2
12
0.3
AND DIMENSIONS
2
9
18 217 228 SOCKET SQUARE BIT
9
φ3
12
6.3 HEX
19 215 222 30° 30°
HEX
6.3
How to Order (Hand Tools)
6.3
HEX
φ11
21 229 237 HEXALOBULAR BIT
HEX
6.3
W2 3.2
22 223 230 SOCKET
24 224 231 BIT TOHNICHI COMMON TOHNICHI TOHNICHI TOHNICHI TOHNICHI COMMON
Indicate model name and Part # POINT
SIGN SIZE SCREW
EXCLUSIVE (STANDARD) EXCLUSIVE EXCLUSIVE EXCLUSIVE EXCLUSIVE (STANDARD)
27 225 232
[Ex.]SOCKET 2H-10 202 plus 0 #0(S-0) See Table A 104 109 115
30 226 233
1 #1(H-1) See Table A 85 106 84 70 116
32 234 240
Socket InIet sign Part # +
⃝ 2 #2(H-2) See Table A 86 107 80
34 236 246
Purpose sign Width across flats 3 #3(H-3) See Table A 87 81 35 700
36 235 241
41 242 ADAPTER 4 #4(H-4) See Table A 36
minus 10 0.15 x 1 111
46 243 Indicate model name and Part #
11 0.2 x 1.5 112
50 244
[Ex.]ADAPTER 2H-3 270 −
⃝ 12 0.3 x 2 113
55 245
Part # 13 0.4 x 2.4 105
Inlet Sign (Female)
14 0.6 x 3.8 108 71
ADAPTER FOR HAND TOOL Purpose sign InIet sign (Male)
15 0.7 x 7 88
INLET(FEMALE) 6.35 9.5 12.7 19.0 16 0.9 x 7 89
INLET(MALE) 2H 3H 4H 6H ADAPTER FOR HAND TOOL 17 1 x10 37
06.3 (2) 271 18 1 x12 38
L
09.5 (3) 270 273 19 1.2 x17 39
12.7 (4) 272 275 ADAPTER 20 1.6 x10 82
φD1
19 (6) 274 21 1.2 x 8 83
Accessories
Accessories
25.4 (8) 276 HEX
box
BOLT
Inlet(MALE)□a2 Inlet(FEMALE)□a1 W 5.5 5.5 M3 91
W 6 6 (M3.5) 95
W 7 7 M4 92
W 8 8 (M4.5)M5 93
SOCKET FOR PNEUMATIC TOOL W10 10 M10 94
CAP SET
INLET(FEMALE) 9.5 12.7 SOCKET FOR PNEUMATIC TOOL How to Order (Air Tools) hex
SCREW SCREW
Width across flats(B) 3P 4P
L SOCKET W 1.27 1.27 M 2.5 56
10 250
12 251 Indicate model name and Part # W 1.5 1.5 M 3 57
φD2
φD1
W2 2 M 2.5 M 4 58
13 252
[Ex.]SOCKET 3P-10 250 W 2.5 2.5 M 3 M 5 59
14 253 260
Width across flats B Inlet□a Part # W3 3 M 4 M 6 60
16 255 264 Socket InIet sign
W4 4 M 5 M 8 61
17 254 261 Purpose sign Width across flats
W5 5 M 6 M10 62
18 265 ADAPTER W6 6 M 8 M12(M14) 63
19 262
Indicate model name and Part # W8 8 M10 M16(M18) 64
21 266
□2 □ 6.35 (1/4) 90 33
22 263 [Ex.]ADAPTER 3P-4 290 SQ.
□3 □ 9.53 (3/8) 34
Inlet Sign (Female) Part # FLAT SOCKET SET
hexalobular
Purpose sign InIet sign (Male) HEAD HEAD SCREWS
ADAPTER FOR PNEUMATIC TOOL SOCKET Note O-ring and pin are not included. T 5 M2 M2.5 470
T 6 M2 M3 471
INLET(FEMALE) 9.5 12.7 19.0 25.4 T 7 M3.5
INLET(MALE) 3P 4P 6P 8P ADAPTER FOR PNEUMATIC TOOL T 8 M2.5 M2.5 M4 472
09.5 (3) 291 L T 9 M4.5
12.7 (4) 290 293 T10 M3 M3 M5
19 (6) 292 295
ADAPTER
φD1
8 451 M 6 10 − − 5 3 d
10 452 Inlet□a
(M 7) 11 − − − − ■ SOCKET head bolt ■○
+ SIZE OF BITS Table A
Width across flats B d
12 453 M 8 13 12 − 6 4 No. OF CROSS NOMINAL
HOLE No. REMARK
Note : O-ring and pin are not included. M10 16 17 14 − 8 5 SIZE OF SCREW
14 454 460
M12 18 19 17 22 10 M1.6, M2 #0 (S-0)
17 461 6 B (Width across flats) PAN HEAD SCREW, FLAT HEAD
(M14) 21 22 19 − 12 [M2], (M2.2), M2.5, [M3] #1 (H-1) SCREW, PAN FLAT SCREW, BIND
19 462
M16 24 22 27 ■ Set screw M3, (M3.5), M4, (M4.5), M5 #2 (H-2) SCREW
14 8 d
(M18) 27 24 − M6 #3 (H-3) 【 [M3], #1 is bind small screw only 】
【 [M2], #1 is not compliant with ISO 】
M20 30 27 32 10 M8, M10 #4 (H-4)
17
(M22) 32 34 30 36 − B (Width across flats)
M24 36 32 41 −
19
a
(M27) 41 36 46 −
b
M30 46 41 50 22 −
■ FLAT HEAD SCREW
(M33) 50 46 − 24 −
NOMINAL SIZE(a) M1 M1.2 (M1.4) M1.6 (M1.7) M2 (M2.2M) M2.3 M2.5 (M2.6) M3 (M3.5) M4 (M4.5) M5 M6 M8 M10
M36 55 50 − −
27 ISO SCREWS 0.4 0.5 0.6 0.8 1 1.2 1.2 1.6 2 2.5
(M39) 60 55 − −
NON-ISO SCREWS 0.32 0.4 0.6 0.8 1 1.2 1.6
M42 65 − − 32 −
JIS JISB1180 JISB1180 JISB1186 JISB1176 JISB1177
32 33
AUXILIARY EQUIPMENT
To facilitate effective and convenient use of TOHNICHI products, a
number of auxiliary parts and special tools are available (Some torque
tools are provided with the necessary auxiliary parts). We are ready to
manufacture custom-made parts and tools to meet your requirements.
Special Tools for Torque Wrench Special Tools for Torque Driver
QLE ADJUSTING TOOL FOR QLE LTD,RTD ADJUSTING TOOL FOR LTD / RTD
This tool is used to set the torque of the large QLE adjustable wrenches This tool is used to adjust the torque of LTD and RTD torque drivers.
PART# APPLICABLE MODELS
QLE550N∼2100N PART# APPLICABLE MODELS
DQLE550N∼1000N 51 LTD15CN,30CN/RTD
301 CLE550N∼1200N 46 LTD60,RTD
TiEQLE750N∼1400N 47 LTD260CN/RTD
PHLE850N,1300N 48 LTD500CN/RTD
49 LTD1000CN
SP THRUSTRING TOOL FOR SP 1046 LTD120CN/RTD
This tool is used to set the torque of preset types SP, RSP, QSP and CSP
torque wrenches.
PART# 工具No. APPLICABLE MODELS
LTD TIGHTENING TOOL FOR LTD
310 A-1 QSP1.5N∼QSP6N/CSP
SP2N∼SP19N
This tool makes tightning with large LTD much easier.
311 A-2 QSP12N/CSP,QSP25N/CSP PART# APPLICABLE MODELS
BQSP25N/BCSP LTD500CN/RTD/NTD/RNTD
SP38N,SP67N,QSP50N∼140N/CSP 31
312 A-3 FTD400CN
BQSP50N∼BQP140N/BCSP LTD1000CN/NTD
Accessories
SP120N∼SP310N,QSP200N∼280N 32
313 A-4 FTD8N,16N
BQSP200N,BQSP280N/BCSP 40 LTD2000CN
QSP420N/CSP
314 A-5
BQSP420N/BCSP
315 A-6 SP420N,SP560N LTD,RTD PRESET HOOK SPANNER FOR LTD / RTD
This tool makes it easier to set the torque for mid to large capacity LTD
QSP3 ADJUSTING TOOLS FOR QSP3 and RTD drivers. PART# APPLICABLE MODELS
52 LTD260CN/RTD
53 LTD500CN/RTD
PART# DIMENSION [mm] APPLICABLE MODELS 54 LTD1000CN
55 LTD2000CN
QSP25N3/CSP3,QSP1.5N4∼12N4
931 2.5×1.5×6
BQSP25N3/BCSP3,CSP1.5N4∼12N4
QSP50N3∼280N3/CSP3
BQSP100N4,200N4 NTD,RNTD ADJUSTING BAR FOR NTD / RNTD
930 4×2.5×8
QSP100N4,200N4
BQSP50N3∼280N3/BCSP3
This tool is used to set the torque of preset types NTD and RNTD
drivers. PART# APPLICABLE MODELS
42 NTD15CN∼120CN/RNTD
DB TOOL SET FOR DB 43 NTD260CN/RNTD
44 NTD500CN∼1000CN/RNTD
This set of pliers is used to adjust the torque for dial type torque
wrenches and torque checkers.
TORQUE DRIVER ADAPTER
This accessory is used with TME2 and TM torque meters to test
UNITORK and torque dirvers.
PART# APPLICABLE MODELS
316 DB,DBE,CDB-S,T-S,DOT
34
AUR
UNITORK (Pistol Type Assembly Pistol Pneumatic Graduation Trigger
Pneumatic Screwdriver)
Combines high speed with high accuracy; torque setting
Direction adjustable with scale.
Accuracy ± 5%
HOSE DIA.
ACCESSORY
PRESSURE
ROTATION
WEIGHT
AIR INLET
SWITCH
FREE
CAPACITY CAPACITY CAPACITY
LIMIT
AIR
S.I. METRIC AMERICAN
[N • m] [kgf • cm] [lbf • in]
MODEL MODEL MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [r • p • m] [MPa] [mm] [kg] BIT MIN. ∼ MAX.
AUR5N 2∼5 0.1 AU50R 20 ∼ 50 1.0 2100 1.5 #3 AU50R-A 15 ∼ 45
WITHOUT
AUR12.5N 5 ∼ 12.5 0.25 AU125R 50 ∼ 125 2.5 800 0.5 10 PT3/8 - AU125R-A 45 ∼ 110
1.7
AUR25N 10 ∼ 25 0.5 AU250R 100 ∼ 250 5.0 400 - AU250R-A 90 ∼ 220
Standard 1. Torque Adjusting key
Accessories 2. M3 HEX key
3. Support Handle (for AUR (LS) 25N)
4. W12 Open Ended Wrench (for AUR(LS)25N)
AUR12.5N
AURLS
LS version available with limit switch.
Accuracy ± 5%
HOSE DIA.
ACCESSORY
PRESSURE
ROTATION
WEIGHT
AIR INLET
SWITCH
FREE
CAPACITY CAPACITY CAPACITY
LIMIT
AIR
S.I. METRIC AMERICAN
[N • m] [kgf • cm] [lbf • in]
MODEL MODEL MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [r • p • m] [MPa] [mm] [kg] BIT MIN. ∼ MAX.
AURLS5N 2∼5 0.1 AU50RLS 20 ∼ 50 1.0 2100 1.5 #3 AU50RLS -A 15 ∼ 45
WITH
AURLS12.5N 5 ∼ 12.5 0.25 AU125RLS 50 ∼ 125 2.5 800 0.5 10 PT3/8 - AU125RLS-A 45 ∼ 110
1.7
AURLS25N 10 ∼ 25 0.5 AU250RLS 100 ∼ 250 5.0 400 - AU250RLS-A 90 ∼ 220
Standard 1. Torque Adjusting key
Accessories 2. M3 HEX key
3. Support Handle (for AUR (LS) 25N)
4. W12 Open Ended Wrench (for AUR(LS)25N)
HOSE DIA
ACCESSORY
U UR
PRESSURE
ROTATION
WEIGHT
NOISE
LEVEL
FREE
CAPACITY CAPACITY CAPACITY
AIR
S.I. [cN • m] METRIC [kgf • cm] AMERICAN [lbf • in]
MODEL MODEL MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [r • p • m] [MPa] [mm] [dB( A )] [kg] BIT MIN. ∼ MAX. GRAD.
U30CN 10 ∼ 30 0.5 U3 1∼3 0.05 1600 0.4 67 0.32 #0 U3-A 1∼3 0.05
U60CN 20 ∼ 60 1 U6 2∼6 0.1 1700 5 68 0.42 #1 U6-A 2∼5 0.1
0.5
U120CN 40 ∼ 120 2 U12 4 ∼ 12 0.2 1400 69 0.48 U12-A 4 ∼ 10 0.2
#2
U250CN 100 ∼ 250 5 U25 10 ∼ 25 0.5 1200 0.6 72 0.75 U25-A 8 ∼ 22 0.5
U500CN 200 ∼ 500 U50-2 20 ∼ 50 1.0 950 0.5 6 68 1.35 U50-2-A 15 ∼ 45 1.0
10 #3
U1000CN 400 ∼ 1000 U100 40 ∼ 100 1.0 700 0.6 75 2.0 U100-A 30 ∼ 90 1
ULR120CN 40 ∼ 120 2 U12LR 4 ∼ 12 0.2 1300 0.5 5 71 0.56 U12LR-A 4 ∼ 10 1
#2
ULR250CN 100 ∼ 250 5 U25LR 10 ∼ 25 0.5 1000 65 0.95 U25LR-A 8 ∼ 22 0.5
0.6 6
UR500N 200 ∼ 500 10 U50R 20 ∼ 50 1.0 950 75 1.45 #3 U50R-A 15 ∼ 45 1
U120CN
Note 1 : U1000CN has a fixed square drive (9.5mm).
Use a socket Bit or a Bit Holder for U1000CN.
Note 2 : UR type has reverse mode
Note 3 : U500CN, U1000CN, UR500CN are pistol style (not straigt style).
Accessories : One touch female joints are available for U30CN to U250CN.
ULR120CN and ULR250CN.
Pit holder is available for U1000N.
HAND COVER
Hand slip protection for uni-screwdrivers.
PART # APPLICABLE MODELS
150 U30CN ∼ 120CN
151 U250CN
TORQUE-FIX
Tool for torque adjustment.
PART # APPLICABLE MODELS
145 U30CN ∼ 120CN, ULR120CN
146 U250CN, ULR250CN
147 U500CN / UR
TOOL KIT
Tool kit to disassemble and assemble.
PART # APPLICABLE MODELS
160 U30CN ∼ U120CN, ULR120CN
161 U250CN, ULR250CN
162 U500CN / UR
163 U1000CN
ALS/ACLS
LS version available with limit switch.
Accuracy ± 3%
CAPACITY CAPACITY MAX. PROVISIONAL
AC100N High provisional torque type S.I. [N • m] METRIC [kgf • cm] TIGHTENING TORQUE AIR INLET
WEIGHT
MODEL MODEL [kg]
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N • M]
ALS10N 3 ∼ 10 0.1 A100LS 30 ∼ 100 1
1.2
AS
Fully-Automatic Right Angle Assembly Angle Pneumatic Graduation/Preset Lever
Nutrunner
Direction
Fully-automatic right angle nut runner which incorporates high
speed provisional tightening and final tightening in one step.
(ASH: High air pressurE, ASL: Low air pressure)
Accuracy ± 5%
PRESET TYPE
■ AS Optional Accessories
AP400N AP2200N
UA
S.I. MODEL [N • m] [mm]
[kgf • m] RATIO [kg] [lbf • in]
MIN. ∼ MAX. MIN. ∼ MAX. L' MIN. ∼ MAX.
UNIVERSAL ARM DECA450N 90 ∼ 450 9 ∼ 45 194 2 65 ∼ 325
DECA900N 180 ∼ 900 18 ∼ 90 241 3.4 130 ∼ 650
DECA1800N 360 ∼ 1800 36 ∼ 180 270 5.7 260 ∼ 1300
DECA3000N 600 ∼ 3000 60 ∼ 300 10:1 324 10 434 ∼ 2170
DECA4500N 900 ∼ 4500 90 ∼ 450 367 12.5 650 ∼ 3250
DECA9000N 1800 ∼ 9000 180 ∼ 900 464 34 1300 ∼ 6500
DECA18000N 3600 ∼ 18000 360 ∼ 1800 540 60 2600 ∼ 13000
Standard 1. Metal Case (for DECA450N ∼ DECA3000N only)
Accessories 2. Metal Case, Hand Hold Handle (for DECA4500N and DECA9000N only)
3. Metal Case, Caster (for DECA18000N only)
ME126N MC400N-TC
DCME25N
Power Supply
MODEL POWER SOURCE AC ( V )
PS-DCME AC200V(AC100V) DC140V AC15V
Note Instruct voltage when ordering
SWITCH HANDLE(SWITCH)
Power Torque Tools
MASTER VALVE
AIR OUTLET x AIR SUPPLY x NUMBER
PART# APPLICATION
( φ D) x ( φ d) x (n)
195 1/2 x 1/4 x 4 MF
196 1/2 x 1/4 x 6 ME
197 3/4 x 3/8 x 2
198 1 x 3/8 x 4 MC
199 1 x 3/8 x 6
TORQUE SENSOR
MODEL APPLICABLE MODELS
TC-ME2 ME, DCME
TC-MCA MC220N, 400N
TC-MCB-2 MC700N
TC-MCB MC1200N
DOT
Analog Torque Wrench Calibration Dial Indicating Manual Handle Direct Reading
Tester
Direction
Dial indicating torque wrench tester with mechanical loading device.
Accuracy ± 2%
Tester / Checker
TORQUE WRENCH
INLET
CAPACITY CAPACITY MAX EFFECTIVE
METRIC DRIVE WEIGHT ACCESSORIES AMERICAN CAPACITY
S.I.MODEL [N • m] [kgf • cm] LENGTH [mm] [lbf • in/lbf • ft]
MODEL [kg] MODEL
L □a
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [mm] [mm] SQ(FEMALE) HEX(MALE) MIN. ∼ MAX. GRAD.
DOT35N 5 ∼ 35 0.1 350DOT 50 ∼ 350 1 DOT300I 40 ∼ 300 lbf·in 1
9.53 □ 6.35 10・13・19
DOT50N 5 ∼ 50 0.2 5000DOT 50 ∼ 500 2 410 8 DOT430I 40 ∼ 430 2
12・14・17
DOT100N 10 ∼ 100 0.5 1000DOT 100 ∼ 1000 5 12.7 □ 6.35, 9.53 DOT1000I 90 ∼ 1000 0.5
17・22・27
DOT300N 30 ∼ 300 1 3000DOT 300 ∼ 3000 10 660 10 ー DOT200F 20 ∼ 200 lbf·ft 1
19・24・30
DOT100N 19.05
22・27・29
DOT700N 70 ∼ 700 2 7000DOT 700 ∼ 7000 20 1260 25 ー DOT500F 50 ∼ 500 2
30・32・36
41
DOT(E3)-MD Calibration Electric Power
Direction
Accuracy ± 2%
(DOT) (DOTE) CAPACITY CAPACITY
TORQUE WRENCH MAX INLET WEIGHT
METRIC EFFECTIVE LENGTH DRIVE DIMENSION [kg] ACCESSORIES
S.I. MODEL [N • m] [kgf • cm] [mm] [mm]
MODEL L □a
BODY CONTROLLER
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [mm] [mm] L' SQUARE (FEMALE) HEX (MALE)
DOT35N-MD 5 ∼ 35 0.1 350DOT-MD 50 ∼ 350 1
9.53 6.35 10 ・ 13 ・ 19
DOT50N-MD 5 ∼ 50
0.2 5000DOT-MD 50 ∼ 500 2 410 511 8
12 ・ 14 ・ 17
DOT100N-MD 10 ∼ 100 0.5 1000DOT-MD 100 ∼ 1000 5 12.7 6.35, 9.53
1.5 17 ・ 22 ・ 27
DOT300N-MD 30 ∼ 300 1 3000DOT-MD 300 ∼ 3000 10 660 771 10 −
19 ・ 24 ・ 30
19
22 ・ 27 ・ 29
DOT700N-MD 70 ∼ 700 2 7000DOT-MD 700 ∼ 7000 20 1260 1365 25 −
30 ・ 32 ・ 36
DOTE100N3-MD
Accuracy ± 1%+1digit
TORQUE WRENCH MAX INLET WEIGHT
CAPACITY CAPACITY EFFECTIVE LENGTH DRIVE DIMENSION [kg] ACCESSORIES
[N • m] METRIC [kgf • cm] [mm] [mm]
S.I. MODEL
MODEL L □a
BODY CONTROLLER
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [mm] [mm] L' SQUARE (FEMALE) HEX (MALE)
DOTE20N3-MD 2~20 0.005 200DOTE3-MD 20~200 kgf • cm 0.05
9.53 6.35 10 ・ 13 ・ 19
DOTE50N3-MD 5~50 0.01 500DOTE3-MD 50~500 0.1 410 511 11
12 ・ 14 ・ 17
DOTE100N3-MD 10~100 0.02 1000DOTE3-MD 100~1000 0.2 6.35, 9.53
12.7 17 ・ 22 ・ 27
DOTE200N3-MD 20~200 0.05 20000DOTE3-MD 200~2000 0.5 660 771 13 −
1.5 19 ・ 24 ・ 30
22 ・ 27 ・ 29
DOTE500N3-MD 50~500 0.1 5000DOTE3-MD 5~50 kgf • cm 0.01 1020 19.05 1141 24 −
30 ・ 32 ・ 36
34 ・ 41
DOTE1000N3-MD 100~1000 0.2 10000DOTE3-MD 100~100 0.02 1650 25.4 1771 45 19.0
46 ・ 50
Note Refer to DOT and DOTE3 pages for detailed specifications.
TF
Fully Automatic Digital Torque Calibration Digital Electric Power Direct Reading Fully Automatic
Wrench Tester
Direction
Centrally controlled torque tool management system features:
automatic measuring and judgment with data processing.
Accuracy ± 1%+1digit
TORQUE WRENCH WEIGHT
METRIC INLET AMERICAN
S.I.CAPACITY MAX EFFECTIVE ACCESSORIES [mm]
CAPACITY DRIVE DIMENSION CAPACITYADAPTER
MODEL CH [N·m] LENGTH [mm]
[kgf • cm/kgf • m] [Ibf • in]
L □a RATCHET DOWN
ADAPTER
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. [mm] [mm] L’ [kg] ADAPTER ADAPTER MIN. ∼ MAX.
Tester / Checker
12.7 - 17 · 22・27
1 5 ∼ 200 0.05 50 ∼ 2000 kgf • cm 1550 12.7 45 ∼ 1750
□ 12.7 12.7 - 9.53 12.7 - 19 · 24 · 30
TF200N 240
□ 9.35 9.53 - 6.35 9.53 - 10 · 13 · 19
2 0.5 ∼ 20 0.005 5 ∼ 200 1480 9.53 4.5 ∼ 175
9.53 - 12 · 14 · 17
1860
kgf • m 19 .05 - 22 · 27 · 29
1 20 ∼ 500 0.2 2 ∼ 50 1550 19.05 175 ∼ 4500
□ 19.05 19.05 - 12.7 19 .05 - 30 · 32 · 36
TF500N 315
TF2000N kgf • m
□ 9.53 9.53 - 6.35 9.53 - 10 · 13 · 19
2 2 ∼ 50 0.02 20 ∼ 500 1480 9.53 17.5 ∼ 450
9.53 - 12 · 14 · 17
25.4 - 36 · 46
1 25 ∼ 1000 0.25 2.5 ∼ 100 kgf • m 1650 25.4 220 ∼ 8800
25.4 - 41 · 50
□ 25.4 25.4 - 19.05
12.7 - 17 · 22 · 27
TF1000N 2 5 ∼ 200 0.05 50 ∼ 2000 kgf • cm 1550 12.7 2160 380 □ 12.7 12.7 - 9.53 45 ∼ 1750
12.7 - 19 · 24 · 30
□ 9.53 9.53 - 6.35
9.53 - 10 · 13 · 19
3 0.5 ∼ 200 0.005 5 ∼ 200 1480 9.53 4.5 ∼ 175
9.53 - 12 · 14 · 17
kgf • m 25.4 - 36 · 46
1 100 ∼ 2100 1 10 ∼ 210 2150 25.4 450 ∼ 18500
25.4 - 41 · 50
□ 25.4 25.4 - 19.05
19.05 - 22 · 27 · 29
TF2000N 2 20 ∼ 500 0.2 2 ∼ 50 1550 19.05 2660 415 □ 19.05 19.05 - 12.7 175 ∼ 4500
19.05 - 30 · 32 · 36
□ 9.53 9.53 - 6.35
9.53 - 10 · 13 · 19
3 2 ∼ 50 0.02 20 ∼ 500 kgf • cm 1480 9.53 17.5 ∼ 450
9.53 - 12 · 14 · 17
42
TCC
Torque Calibrator and Calibration Digital Manual Handle Direct Reading Torque Tool Control System
Controller
Direction
Torque Calibrator with Data Management Software with wide
torque range.
Accuracy ± 1%+1digit
CAPACITY TORQUE WRENCH MAXIMUM INLET DRIVE DIMENSION WEIGHT ACCESSORIES [mm]
S.I.MODEL CH [N • m] EFFECTIVE LENGTH □a [mm] DOWN RATCHET
[mm] HEX ADAPTER Other
MIN. ∼ MAX. GRAD. (mm) L’ [kg] ADAPTER ADAPTER
Printer
MODEL
EPP16M2 Common Specifications
Display 5.7 type STN LCD 320 x 240 dots 2colors (Blue, White) CFL (Back light)
Switch Touch Panel
① Click direct reading mode
When 1 measuring point x 3 times: Max 2730 data When 3 measuring point x 3 times: Max 1488 data
Measurement data memory When 5 measuring point x 5 times: Max 780 data When 1 measuring point x 5 times: Max 2340 data
When 3 measuring point x 5 times: Max 1170 data When 3 measuring point x 10 times: Max 762 data
② Manual mode 200 data
Torque wrench/driver registration data 1000pcs worth at maximum (model, serial number, measurement
Torque wrench point, measurement count, accuracy level, channel, measurer, past record)
/ driver registration data Maximum data amount (1000pcs worth) is based on testing torque wrenches of single force direction.
When testing bi-direction torque wrenches such as BQSP, it will be less than 1000pcs)
Measurement mode Click mode / direct reading mode / manual mode
Channel switch Switching measuring torque range (changeable by channel change button)
OK / NG judgement Accuracy level setting (1 ∼ 99%) OK / NG judgement
Statistic calculation Sample q'ty, max. / min. / ave. value (For manual mode only)
Zero adjustment Automatic (press C key)
Interface Serial interface (RS-232 comliant) USB interface (Tohnichi-proprietary USB memory)
Reset Manual button / Auto reset (0.1 ∼ 5 sec)
Other functions Metric value reference button (N·m value x 10.1972 or 0.101972)
Operating temperature range [ºC] 0 ∼ 40 (no condensation)
Power AC[V] 100 ∼ 240 50 / 60Hz auto shift.
Power consumption [W] Less than 20
Tester / Checker
43
LC2
Line Checker Checking Digital Manual Loading Direct Reading
Direction
For quick daily inspection of torque wrenches.
Accuracy ± 1%+1digit
CAPACITY INLET
[N·m] CAPACITY CAPACITY
S.I. METRIC DRIVE WEIGHT AMERICAN
[kgf·cm/kgf·m] [lbf·in/lbf·ft]
MODEL MESUREMENT MODEL □a [kg] MODEL
MIN. ∼ MAX. GRAD.
MODE MIN. ∼ MAX. GRAD. [mm] MIN. ∼ MAX. GRAD.
0.500 ∼ 0.995 0.005 5.00 ∼ 9.95 kgf·cm 0.05 5.00 ∼ 9.95 lbf • in 0.05
PEAK 1.00 ∼ 9.99 0.01 10.0 ∼ 99.9 0.1 10.0 ∼ 99.9 0.1
LC20N2 200LC2 9.53 200LC2-A
10.0 ∼ 20.0 0.1 100 ∼ 200 1 100 ∼ 174 1
RUN 0.500 ∼ 20.000 0.005 5.00 ∼ 200.00 0.05 5.00 ∼ 174.00 0.05
10.5
5.00 ∼ 9.95 0.05 50.0 ∼ 99.5 kgf·cm 0.5 50.0 ∼ 99.5 lbf • in 0.5
PEAK 10.0 ∼ 99.9 0.1 100 ∼ 999 1 100 ∼ 999 1
LC200N2 2000LC2 12.7 2000LC2-A
100 ∼ 200 1 1000 ∼ 2000 10 1000 ∼ 1740 10
RUN 5.00 ∼ 200.00 0.05 50.0 ∼ 2000.0 0.5 50.0 ∼ 1740.0 0.5
50.0 ∼ 99.8 0.2 5.00 ∼ 9.98 kgf·m 0.02 36.8 ∼ 99.8 lbf • ft 0.2
PEAK 100 ∼ 1000 1 10.0 ∼ 100.0 0.1 100 ∼ 735 1
LC1000N2 10000LC2 25.4 34 10000LC2-A
- - - - - -
RUN 50.0 ∼ 1000.0 0.2 5.00 ∼ 100.00 0.02 36.8 ∼ 735.0 0.2
ST2
SPINTORK Checking Digital Re-chargeable Direct Reading
Direction
World’s smallest torque checker. High accuracy and easy
operation, suitable for nut runner torque checking.
Accuracy ± 1%+1digit
CAPACITY CAPACITY DIMENSION CAPACITY
[N • m] METRIC [kgf·cm/kgf·m] [mm] WEIGHT AMERICAN [Ibf·in/Ibf·ft]
S.I.MODEL
MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. L' MIN. ∼ MAX. GRAD.
ST10N2 2 ∼ 10 0.01 ST100M2 20 ∼ 100 kgf·cm 0.1 ST90i2 20 ∼ 90 lbf • in 0.1
ST20N2 4 ∼ 20 0.02 ST200M2 40 ∼ 200 0.2 ST180i2 40 ∼ 180 0.2
ST50N2 10 ∼ 50 0.05 ST500M2 100 ∼ 500 0.5 75 0.25 ST450i2 100 ∼ 450 0.5
ST100N2 20 ∼ 100 0.1 ST1000M2 200 ∼ 1000 1 ST900i2 200 ∼ 900 1
ST50N2 ST1000N2 ST200N2 40 ∼ 200 0.2 ST2000M2 400 ∼ 2000 2 ST150F2 30 ∼ 150 lbf • ft
0.2
ST500N2 100 ∼ 500 0.5 ST5000M2 1000 ∼ 5000 5 120 ST360F2 72 ∼ 360 0.5
1.3
ST1000N2 200 ∼ 1000 1 ST10000M2 20 ∼ 100 kgf·m 0.1 135 ST700F2 140 ∼ 700 1
Tester / Checker
■ ST2 Optional Accessories Note ST Extension bar (option) is designed with the same length as ST so that torque checking of a nut runner can be done easily.
Standard 1. Quick Battery Charger (BC-4) 2. Battery Pack (built-in) 3. CD-ROM (USB Driver)
CONNECTING CABLE Accessories 4. USB Connecting Cable 5. Carrying Case
PART# APPLICABLE MODELS
382 DOTE3, TME2, LC2, TDT2, → EPP16M2
DA
383 DOTE3, TME2, LC2, TDT2 → PC (D-SUB 9pin FEMALE)
INFRARED RECEIVER DOWN ADAPTER Compact adapter to reduce the size of square drive.
RA
ST50N2 / ST500M2
247 ST100N2 / ST1000M2
ST200N2 / ST2000M2
248 ST500N2 / ST5000M2 Ratchet Adapter Adapter for torque wrench testing.
249 ST1000N2 / ST10000M2
DIMENSION [mm]
ALLOWABLE WEIGHT
SQUARE DRIVE
MODEL HEIGHT THICKNESS OUTER DIA. TORQUE APPROX.
MALE FEMALE H h D
□a □b [N • m] [kg]
RA3 9.53 9.53 40.5 23 62 50 0.3
RA4 12.7 12.7 49 28 90 200 0.9
RA6 19.05 19.05 66 37 125 750 2.3
RA8 25.4 25.4 86 51 190 2100 7.1
RA12 38.1 38.1 111 60 234 3000 12.6
44
TDT2
Digital Torque Screwdriver Tester Calibration Digital Manual Rotary Direct Reading Loading Device
Direction
Torque driver tester with loading device eliminates measurement errors.
Accuracy ± 1%+1digit
CAPACITY CAPACITY CAPACITY
S.I. [cN • m] METRIC [kgf • cm] SQUARE WEIGHT AMERICAN [lbf • in]
MODEL MODEL DRIVE [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. MIN. ∼ MAX.
TDT60CN2 2 ∼ 60 0.01 6TDT2 0.2 ∼ 6 0.001 6.35HEX(Male) 6TDT2-A 0.2 ∼ 5
13.5
TDT600CN2 20 ∼ 600 0.1 60TDT2 2 ∼ 60 0.01 with a groove(0.7mm) 60TDT2-A 2 ∼ 50
ATG/BTG
Analog Torque Gauge Dial Indicating 3-jaw chuck Direct Reading
Torque gauge series designed to measure low torque from 0.5 mN·m
Direction to 150 cN·m.
Accuracy ± 2%
CAPACITY CAPACITY DIMENSION CAPACITY
[cN • m] METRIC [gf • cm/kgf • cm] [mm] WEIGHT AMERICAN [ozf • in/lbf • in]
S.I. MODEL
MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. L' MIN. ∼ MAX.
ATG045CN 0.05 ∼ 0.45 0.01 45ATG 5 ∼ 45 gf·cm 1 ATG06Z 0.06 ∼ 0.6
ATG09CN-S 0.1 ∼ 0.9 90ATG-S 10 ∼ 90 ATG1.5Z-S 0.2 ∼ 1.5
0.02 2
ATG1.5CN-S 0.2 ∼ 1.5 150ATG-S 20 ∼ 150 ATG2.4Z-S 0.3 ∼ 2.4
ATG3CN-S 0.3 ∼ 3 0.05 300ATG-S 30 ∼ 300 5 89 0.18 ATG4.5Z-S 0.5 ∼ 4.5
ATG6CN-S 0.6 ∼ 6 0.1 600ATG-S 60 ∼ 600 10 ATG9Z-S 1∼9
ATG12CN-S 1 ∼ 12 0.2 1200ATG-S 100 ∼ 1200 20 ATG18Z-S 2 ∼ 18
ATG24CN-S 3 ∼ 24 0.5 2400ATG-S 300 ∼ 2400 50 ATG36Z-S 4 ∼ 36
kgf·cm
BTG15CN-S 2 ∼ 15 0.2 1.5BTG-S 0.2 ∼ 1.5 0.02 1.5BTG-A-S 0.1 ∼ 1.5
BTG24CN-S 3 ∼ 24 2.4BTG-S 0.3 ∼ 2.4 2.4BTG-A-S 0.3 ∼ 2.4
0.05 0.05
BTG36CN-S 4 ∼ 36 3.6BTG-S 0.4 ∼ 3.6 3.6BTG-A-S 0.4 ∼ 3.6
ATG6CN BTG36CN BTG60CN-S 6 ∼ 60 6BTG-S 0.6 ∼ 6
119 0.52
- -
Tester / Checker
1 0.1
BTG90CN-S 10 ∼ 90 9BTG-S 1∼9 9BTG-A-S 1∼9
BTG150CN-S 20 ∼ 150 2 15BTG-S 2 ∼ 15 0.2 15BTG-A-S 2 ∼ 15
■ ATG Optional Accessories
Note 1. ATG045CN is not equipped with a memory pointer (ATG045CN-S is not available).
PART # 2. ATG chuck (steel) is covered with aluminum case as standard. Resin chuck or cover is available as option.
322 (RESIN)
321 (STEEL)
BTGE
Digital Torque Gauge Digital 3-jaw Chuck Direct Reading Battery
Direction
Digital torque gauge series for small torque range 2cN.m ‒ 200cN.m.
Accuracy ± 2% +1digit
CAPACITY CAPACITY DIMENSION CAPACITY
[cN • m] METRIC [gf • cm] [mm] WEIGHT AMERICAN [lbf • in]
S.I. MODEL
MODEL [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. L' D MIN. ∼ MAX. GRAD.
BTGE10CN 2 ∼ 10 0.01 BTGE1KM 0.2 ∼ 1 0.001 BTGE09I 0.2 ∼ 0.9 0.001
BTGE20CN 4 ∼ 20 0.02 BTGE2KM 0.4 ∼ 2 0.002 BTGE1.8I 1.4 ∼ 1.8 0.002
BTGE50CN 10 ∼ 50 0.05 BTGE5KM 1∼5 0.005 130 75 0.65 BTGE4.4I 1 ∼ 4.4 0.005
BTGE100CN 20 ∼ 100 0.1 BTGE10KM 2 ∼ 10 0.01 BTGE9I 2∼9 0.01
BTGE200CN 40 ∼ 200 0.1 BTGE20KM 4 ∼ 20 0.02 BTGE18I 4 ∼ 18 0.02
BTGE200CN
45
TME2
Digital Torque Meter Digital Pole clamping Direct Reading
TM
Analog Torque Meter Pole clamping Direct Reading
Direction
Analog torque meter for measuring bottle cap tightening,
spring force, etc.
Accuracy ± 2%
Accuracy ± 2%
46
TCF
Fixed Type Voltage Output Fixed
Torque Sensor
Static torque sensor to detect precise torque of variety of
devices.
CAPACITY CAPACITY CAPACITY
[N • m] METRIC [kgf • cm] WEIGHT AMERICAN [lbf • in/lbf • ft]
S.I. MODEL
MODEL [kg] MODEL
MIN. ∼ MAX. MIN. ∼ MAX. MIN. ∼ MAX.
TCF02N 0.02 ∼ 0.2 TCF1.8 0.18 ∼ 1.8 TCF1.8I 0.18 ∼ 1.8 lbf·in
0.45
TCF04N 0.04 ∼ 0.4 TCF3.5I 0.35 ∼ 3.5
- -
TCF1N 0.1 ∼ 1 TCF9I 0.9 ∼ 9.0
TCF2N 0.2 ∼ 2 TCF18 1.8 ∼ 18 0.5 TCF18I 1.8 ∼ 18
TCF4N 0.4 ∼ 4 TCF35I 3.5 ∼ 35
- -
TCF10N 1 ∼ 10 TCF90I 9.0 ∼ 90
TCF20N 2 ∼ 20 TCF180 18 ∼ 180 0.6 TCF180I 18 ∼ 180
TCF40N 4 ∼ 40 TCF350I 35 ∼ 350
- -
TCF100N 10 ∼ 100 TCF75F 7.5 ∼ 75 lbf·ft
2.5
TCF200N 20 ∼ 200 TCF1800 180 ∼ 1800 TCF150F 15 ∼ 150
CD42 TCF20N TCF400N 40 ∼ 400
- -
6 TCF300F 30 ∼ 300
TCF1000N 100 ∼ 1000 TCF750F 75 ∼ 750
12
CD42 DISPLAY (OPTIONAL) TCF2000N 200 ∼ 2000 TCF18000 1800 ∼ 18000 TCF1500F 150 ∼ 1500
Standard Connecting Cable
Accessories
Tester / Checker
TTF7 10 ∼ 70 70
TFT11 + ATF18 + TCF20N TCF1N ∼ 4N
ATF1.8-2
TCF02N, 04N
TTF11 TCF10N ∼ 40N 14 ∼ 110 110
ATF18 TCF10N ∼ 40N
ATF1.8-2 TCF1N ∼ 4N
TTF19 18 ∼ 190 180
ATF18 TCF10N ∼ 40N
Note TTF table is set on ATF attachment, and ATF is set on TCF.
TCR
Rotary Type Voltage Output Rotary
Torque Sensor
Rotary torque sensors capable of measuring rotating objects.
CAPACITY CAPACITY MAX DIMENSION CAPACITY
S.I. MODEL[N • m] METRIC [kgf·cm] SPEED [mm] WEIGHT AMERICAN [Ibf • in/Ibf • ft]
MODEL [㎏] MODEL
MIN. ∼ MAX. MIN. ∼ MAX. [r.p.m] L L1 MIN. ∼ MAX.
TCR18N 1.8 ∼ 18 TCR180 18 ∼ 180 76 25 0.9 TCR180-A 16 ∼ 160 lbf·in
2000
TCR180N 18 ∼ 180 TCR1800 180 ∼ 1800 83 34 1.3 TCR1800-A 13 ∼ 130 lbf·ft
TCR700N 70 ∼ 700 TCR7000 700 ∼ 7000 95 40 2.0 TCR7000-A 50 ∼ 500
1000
TCR1800N 180 ∼ 1800 TCR18000 1800 ∼ 18000 110 45 3.6 TCR18000-A 130 ∼ 1300
Standard Connecting Cable
Accessories
CD42
TCR18N
47
CALIBRATION KIT
◆ Calibration Kit for DOTE3/DOT ◆ Calibration Kit for TDT2
MODEL DESCRIPTION APPLICABLE MODELS MODEL DESCRIPTION APPLICABLE MODELS
Calibration lever, Wire, Calibration stand, DOTE20N3, 50N3, Scale pan (100g), Scale holder (1kg), Calibration lever,
DOTCL36N TDTCL60CN TDT60CN2
Reaction unit, Scale holder (0.5kg) DOT35N, 50N wire, Calibration roller
Calibration lever, Wire, Calibration stand, DOTE100N3 Scale pan (100g), Scale holder (1kg), Calibration lever,
DOTCL100N TDTCL600CN TDT600CN2
Reaction unit, Scale holder (1kg) DOT100N wire, Calibration roller
Calibration lever, Wire, Calibration stand,
DOTCL200N DOTE200N3
Reaction unit, Scale holder (1kg)
Calibration lever, Wire, Calibration stand,
DOTCL360N DOT300N
Reaction unit, Scale holder (5kg)
DOTCL700N
Calibration lever, Wire, Calibration stand, DOTE500N3 ◆ Calibration Kit for ATG/BTG /BTGE
Reaction unit, Scale holder (5kg) DOT700N
Calibration lever, Wire, Calibration stand, MODEL DESCRIPTION APPLICABLE MODELS
DOTCL1000N DOTE1000N3 Main unit, Calibration pulley x 2, Calibration wire x 2,
Reaction unit, Scale holder (5kg) ATGTCL24CN ATG
Scale pan (5g x 1, 100g x 1), Hex. key
Main unit, Calibration pulley x 2, Calibration wire x 2,
BTGTCL150CN BTG / BTGE
Scale pan (5g x 1, 100g x 1), Hex. key
Note #807 is required when calibrating BTGE.
TDTCL600CN
DOTCL100N TFTCL2000N
2TMTCL
ATGTCL24CN TCCTCL500N TCL200N
◆ Weight
MODEL SPECIFICATION
WP-TCL5 5kg
WP-TCL2 2kg
WP-TCL1 1kg
WS-TCL2 2kg (set)
Note 1. A dead weight is available for sale.
2. Calibration certificate for dead weight is available on request.
48
Bolt Tension Meter
BTM
Dial Indicating Direct Reading
HEX BOLT /
TYPE BOLT
TORSIA
M20
BTM400K 40 ∼ 400 5 40BTM-2 4 ∼ 40 0.5 12.6 40BTM-2-A 23000 ∼ 90000
M22
M24
M5(20), M6(21)
B-BTM13K 1.2 ∼ 13 0.2 1.3B-BTM 0.12 ∼ 1.3 0.02 7.7 1.3B-BTM-A 300 ∼ 2800
M8(22.5)
STANDARD BOLT
M10(29), M12(31)
B-BTM40K 4 ∼ 40 0.5 4B-BTM 0.4 ∼ 4 0.05 9.8 4B-BTM-A 1000 ∼ 9000
M14(32)
M16(41), M18(43)
B-BTM130K 12 ∼ 130 2 13B-TM 1.2 ∼ 1.3 0.2 17.5 13B-BTM-A 3000 ∼ 28000
M20(44), M24(47)
M27(72), M30(74)
B-BTM400K 40 ∼ 400 5 40B-TM 4 ∼ 40 0.5 31.0 40B-BTM-A 1000 ∼ 90000
M36(79), M42(84)
Note High strength hexagon bolts for friction grip joints are used in the table above.
Standard Plate, Bushing, Spanner for plate, Bolt for plate, Case, Certificate of calibration
Accessories
BTM400K B-BTM13K
Fcon
Bolt Tension Bolt tension stabilizer creates highly consistent fastener
Stabilization tension.
Fcon
Axial tension stability characteristics
PART#
Fcon
Sales Unit: 10pcs / case
Test condritions
Content: 90g / bottle Axial tension 80 KN Fluctuating coefficient
Torque fluctuating coefficient
Torque coefficient
30 time of test
along the screw thread (2 mm width
more or less), and on the bearing
surface at 3 different spots evenly.
Use appropriate amount depending
on the size of the bolt.
Force Measurement
Fcon Machine oil Lubricant Other
Instrument
Torque coefficient calculated by formula K = t / (d x f)
T = tightening torque, d = nominal size of
screw, F = axial tension, Torque
fluctuating coefficient = torque coefficient average
abmodality / average torque coefficient
Machine oil
Fcon
Test temperature (°
C)
Tightening speed (rpm) Influence of temperature on torque coefficient
Influence of tightening speed
49
TT2000
Ultrasonic Digital Direct Reading
Tightening Tester
Ultrasonic bolt tension meter capable of visualizing
change in bolt tension without breaking the bolt.
APPLYCATION INDUSTRY / USAGE FUNCTIONS
TT2000 Axial tension, field use / Popular version Popular version for measurement only
TT2000C Maintenance / Inspection, PC control Above + communication function
TT2000M Tightening study / Manufacture for trial, Experiment, Study Above + Angle synchronized mode
Specifications
Measurement Range [mm] 5 ∼ 10,000(Steel materia)
Applicable Bolt Length [mm] 50 ∼ 9000
Applicable Bolt Diameter [mm] φ 6 dia or, more
Ultrasonic Wave Frequency [MHz] 0.5 ∼ 15
Display Screen Color 6.4type (640 × 480dots)
Time Axis Resolution [ns] 5
TT2000 It is decided by bolt diameter, and lengh
(Example) On the measurement (steel) of first base echo
Axial Force Measurement
Bolt diameter φ 10 bolt tightening length 50mm ± approx.1.47kN
Bolt diameter φ 20 bolt tightening length 100mm ± approx.2.94kN
Result of Measurement Bolt initial length (mm), echo power (dB), bolt axial force (N), stress (Mpa), elogation (mm)
Memory Capacity of Data 2000pcs. or time pass measurement 300 items
8 bit serial interface (RS232C) * 2
External Output
Composit output (NTSC), Alarm output (photo coupler), Encorder input * 3
Bolt Temperature Correction Manual input by key, Auto temperature input * 1
Power Supply AC85 ∼ 130[V], AC185 ∼ 265[V] (50 / 60Hz) or DC12[V] * 4
Battery Portable: 2.5h Usage 1.5h Charge Built -in case usage: 8h usage 4.5h charge
Dimensions [mm] Body: 160 × 246 × 60 (H, W, D) Body + Built -in battery : 160 × 246 × 246 (H, W, D)
Weight Approx. [kg] Body: 1.2 Body + built -in battery: 4.9
Usable Temperature Range [℃ ] 0 ∼ 45
Note 1. Optional thermometer can be connected to TT2000C and TT2000M for auto temperature adjustment. Input temperature range is
from -40℃ to 200℃ . Measurement over 60℃ requires a sensor specially designed for high temperature.
2. RS232C connector is available only with TT2000C and TT2000M.
3. Composite output, alarm output and encoder input are available only when using a multi connector box(TT2000M) or optional
built-in battery case.
4. DC12V can be used only when using the optional portable battery or the built-in battery case.
MODEL DESCRIPTION
AFC-20G Axial Force Calibration
Instrument
50
RPTM
Rope Tension Meter Wire rope tension can be measured in simple operation.
Accuracy ± 10%
T-S
T-Handle Dial Indicating Inspection Dial Indicating Direct Reading Memory Poinetr
Torque Wrench
Direction
Dial-indicating torque wrench with dual grip to apply
stable torque for tightening and inspection.
Accuracy ± 3%
MAX. DIMENSION[mm]
CAPACITY CAPACITY CAPACITY
[N • m] METRIC [kgf • cm/kgf • m] HAND WEIGHT AMERICAN [kgf • m]
S.I. MODEL FORCE
MODEL OVERALL SQUARE NECK [kg] MODEL
MIN. ∼ MAX. GRAD. MIN. ∼ MAX. GRAD. [N] LENGTH DRIVE LENGTH MIN. ∼ MAX.
T23N-S 3 ∼ 23 230T-S 23 ∼ 30kgf·cm 128 205 71 0.41 T200I-3AS 20 ∼ 200lbf·in
0.5 50 9.53
T45N-S 5 ∼ 45 450T-S 50 ∼ 450 200 261 82 0.53 T400I-3AS 50 ∼ 400
T90N-S 10 ∼ 90 1 900T-S 100 ∼ 900 1 265 376 102.5 0.8 T65F-4AS 10 ∼ 65lbf·ft
12.7
T180N-S 20 ∼ 180 2 1800T-S 200 ∼ 1800 2 290 656 118.5 1.2 T130F-4AS 130 ∼ 250
T90N-S T700N-S 70 ∼ 700 7000T-S 7 ∼ 70kgf·m 608 1300 19.05 4 7000T-A-S 50 ∼ 500
10 1
T1000N-S 100 ∼ 1000 10000T-S 10 ∼ 100 676 1630 4.8 10000T-A-S 50 ∼ 700
T1400N-S 200 ∼ 1400 14000T-S 20 ∼ 140 809 1880 25.4 6.2 14000T-A-S 100 ∼ 1000
20 2
T2100N-S 200 ∼ 2100 21000T-S 20 ∼ 210 905 2500 10 21000T-A-S 200 ∼ 1500
T700N-S T2800N-S 300 ∼ 2800 28000T-S 30 ∼ 280 1015 2960 15.5 28000T-A-S 200 ∼ 2000
50 5 38.10
T4200N-S 400 ∼ 4200 42000T-S 40 ∼ 420 1214 3660 21.5 42000T-A-S 400 ∼ 3000
Note T700N-S to T4200N-S models are supplied upon request only.
Force Measurement
Instrument
51
CD42
Compact Display Digital Sensor Contacts Direct Reading Comparator Judgment
Specifications
■ CD42 Optional Accessories Input Signal [mV/V] ± 0.5 ∼ 3
Printer Display 5 digit, Fluorescent display tube.
MODEL Resolution ± 1/2000
EPP16M2 Input Voltage [V] 5
Non-linearity 0.05% F.S. / Zero drift: within 0.5 μv
Accuracy
/ ℃ / Gain drift : within 0.01% / ℃
DFS Data Filling System Software Program
Digital gain adjustment (1) Equivalent input
MODEL Media Gain Adjustment
calibration (2) Actual loaded calibration
DFS CD-ROM
Memory 99 data
External Input Reset signal/Judgement signal
CD42 CONNECTING CABLE RS232C output, Analog output
External Output
PART # APPLICABLE MODELS HI, OK LO (relay signal output)
380 CD42 → EPP16M2 Operating Temperature Range [℃ ] 0 ∼ 40 (no condensation)
561 CD42, TCC → PC (D-SUB 9pin FEMALE) Power AC[V] 100 ∼ 240 ± 10% 50 / 60Hz auto shift.
Power Consumption [W] Less than 10
Dimension [mm] 150x200x94 (W, D, H)
Weight Approx. [㎏] 1.7
Input signal control unit. (selectable
Option
condition from the two settings)
R-DT999
Interface for Infrared Data tank to receive infrared data and output to PC or
Data Transfer printer.
MODEL
R-DT999
Specifications
■ R-DT999 Optional Accessories Data Input Infrared data input (TOHNICHI format only)
Printer 6 lines 14segments LCD, 4 lines
Display
MODEL 7segments LCD, 4lines 7segments LED
EPP16M2 Applicable Model CEM3, CEM2, ST, ST2, STC, CTA, CTB
RS232C compliance, USB connector
Data Output
serial output (*USB 1.1)
DFS Data Filling System Software Program Power AC[V] 100 ∼ 240V ± 10% 50/60Hz
MODEL Media Dimension W80xD125xH32
DFS CD-ROM Standard Accessories AC adapter
Operating Temperaturerang [℃ ] 0 ∼ 40
Weight [g] Approx. 205 (body only)
R-DT999
CONNECTING CABLE
PART # APPLICABLE MODELS
379 CEM2, CEM3 (-P), CTA2, R-DT999 → EPP16M2
575 CEM2, CEM3 (-P), CTA2, R-DT999 → PC (D-SUB 9pin FEMALE)
584 CEM3, CEM3-P, CTA2, R-DT999 → PC (USB A TYPE)
Note ( ) shows the pin shape.
DFS
DFS Data Filling System Data Processing software
Software Program
MODEL Media
DFS CD-ROM
Note Connecting cable is an optional accessory.
Optional Equipment
PC CONNECTING CABLE
PART # APPLICABLE MODELS
575 CEM2, CEM3 (-P), CTA2, R-DT999 → PC (D-SUB 9pin FEMALE)
ST2 TME2 561 CD42, TCC → PC (D-SUB 9pin FEMALE)
579 CTB → PC (D-SUB 9pin FEMALE)
CD42
584 CEM3, CEM3-P, CTA2, R-DT999 → PC (USB A TYPE)
CEM3 583 CTA-P → PC(D-SUB 9pin FEMALE)
DFS 383 DOTE3, TME2, LC2, TDT2 → PC (D-SUB 9pin FEMALE)
Note ( ) shows the pin shape.
52
EPP16M2
Printer Printer for TOHNICHI digital torque meters and instruments.
MODEL
EPP16M2
Specifications
■ EPP16M2 Optional Accessories Printing Method Mechanical dot matrix printer
Accessories Printing Speed [line/s] 2.5
PART #. DESCRIPTION Line Spece 3 dot line base
408 Roll paper Number of Pringted Digits Standard letter 16 (letter/line)
409 Ribbon cassette Character Size [mm] 2.6x1.7 (H,W)
Paper 57.5 mm roll paper
Ink Ribbon Ribbon casette type
Dimension [mm] Body 106x144x60 (W, D, H)
Weight [g] Approx. 400 (body only)
Environmental Operating temperature +5 ∼ 45 (no condensation)
[ºC]
Condition Storage temperature -10 ∼ +70 (excluding the paper)
Input Signal Based on RS232C
EPP16M2 Standard Accessories AC adapter, Roll paper
Power AC[V] AC100V ∼ 240V 50 / 60Hz
CONNECTING CABLE
PART # APPLICABLE MODELS
378 CTB → EPP16M2
379 CEM2, CEM3 (-P), CTA2, R-DT999 → EPP16M2
380 CD42, TCC → EPP16M2
381 EPP16M → EPP16M2
382 DOTE3, TME2, LC2, TDT2, → EPP16M2
Note. No. 381 is the conversion adapter for EPP16M cord to be used for EPP16M2.
DECA
10:1 Multiplier device to increase the tightening torque by 10
Ratio Torque Multiplier times.
Accuracy ± 5%
METRIC AMERICAN
CAPACITY MODEL DIMENSION
Multiplier TORQUE GEAR WEIGHT CAPACITY
S.I. MODEL [N • m] [mm]
[kgf • m] RATIO RATIO [kg] [lbf • in]
MIN. ∼ MAX. MIN. ∼ MAX. L' MIN. ∼ MAX.
DECA450N 90 ∼ 450 9 ∼ 45 194 2 65 ∼ 325
12.5:1
DECA900N 180 ∼ 900 18 ∼ 90 241 3.4 130 ∼ 650
DECA1800N 360 ∼ 1800 36 ∼ 180 270 5.7 260 ∼ 1300
DECA3000N 600 ∼ 3000 60 ∼ 300 10:1 324 10 434 ∼ 2170
DECA4500N 900 ∼ 4500 90 ∼ 450 14.4:1 367 12.5 650 ∼ 3250
DECA9000N 1800 ∼ 9000 180 ∼ 900 464 34 1300 ∼ 6500
DECA18000N 3600 ∼ 18000 360 ∼ 1800 540 60 2600 ∼ 13000
Standard 1. Metal Case (for DECA450N ∼ DECA3000N only)
UNIVERSAL ARM Accessories 2. Metal Case, Hand Hold Handle (for DECA4500N and DECA9000N only)
DECA900N 3. Metal Case, Caster (for DECA18000N only)
UA
DESCRIPTION PART#
QL/QLE/CL/CLE, PQL, PCL, YCL Thrust Ring, Steel Ball Scale Piece, Adjusting Screw
Click Type
WQL Thrust Ring, Steel Ball Scale Piece, Adjusting Screw, Screw Knob, Protector
Torque Wrench
MPQL Thrust Ring, Steel Ball Scale Piece, Adjusting Screw, Ratchet Gear, Marker pipe
Click Type RTD, RNTD Shaft, Toggle sheet
Screw Driver RTD, LTD, BMLD Case, Adjusting piece, Gear part
Peneumatic Torque A/AC Thrust Ring, Steel Ball Scale Piece, Adjusting Screw
Wrench AP, AS Clutct part
53
RELATION FIGURE OF SCREW AND TORQUE
Technical Data
Calculation Formula
kN・m
H=0.866025P 3 33
30
σ= Ff
2
As 27
1 24
T : Tightening torque [N ・ m/kgf ・ cm] 900 22
800
K : Torque coefficient 0.2 ( μ≒ 0.15) 700
600 20
d : Nominal diameter of bolt [mm]
500
Ff : Axial tension [N/kgf] 400 18
As : Stress area of bolt [mm2] 300 16
(JIS B 1082)
d2 : Effective diameter of bolt [mm] 200 14
(JIS B 0205)
12
d1 : Root diameter of bolt [mm] 100
90
(JIS B 0205) 80
70 10
H : Fundamental triangle height [mm] 60
P : Pitch [mm] 50
40
σ : Tensile stress of bolt [N/mm2 / kgf/mm2]
8
30
7
20
6
1000 10
900 9
800 8 5
700 7
600 6
4.5
500 5
400 4
4
300 3
3.5
200 2
3
100 1
90 900 2.5
80 800
70 700
60 600
2.2
50 500
cN・m
40 400 2
30 300 1.8
mN・m
20 200 1.6
1.4
10 100
9 90 1.2
8 80
7 70
6 60 1.1
5 50
4 40 1
3 30
2 20
1 10
10 20 30 40 50 60 70 Stress N/mm2
Copper Carbon Steel 8T 10T Strength Classification
54
STANDARD TIGHTENING TORQUE
Technical Data
STANDARD TIGHTENING TORQUE N ・ m STANDARD TIGHTENING TORQUE kgf ・ cm
NOMINAL SIZE T 0.5T 1.8T 2.4T NOMINAL SIZE T 0.5T 1.8T 2.4T
OF SCREW N・m N・m N・m N・m OF SCREW kgf ・ cm kgf ・ cm kgf ・ cm kgf ・ cm
M1 0.0195 0.0098 0.035 0.047 M1 0.199 0.100 0.357 0.479
(M1.1) 0.027 0.0135 0.049 0.065 (M1.1) 0.275 0.138 0.500 0.663
M1.2 0.037 0.0185 0.066 0.088 M1.2 0.377 0.189 0.673 0.897
(M1.4) 0.058 0.029 0.104 0.140 (M1.4) 0.591 0.296 1.06 1.43
M1.6 0.086 0.043 0.156 0.205 M1.6 0.877 0.438 1.59 2.10
(M1.8) 0.0128 0.064 0.230 0.305 (M1.8) 1.31 0.653 2.35 3.11
M2 0.176 0.088 0.315 0.42 M2 1.79 0.897 3.21 4.28
(M2.2) 0.230 0.116 0.41 0.55 (M2.2) 2.35 1.17 4.18 5.61
M2.5 0.36 0.180 0.65 0.86 M2.5 3.67 1.84 6.63 8.77
M3 0.63 0.315 1.14 1.50 M3 6.42 3.21 11.6 15.3
(M3.5) 1.00 0.50 1.80 2.40 (M3.5) 10.2 5.1 18.4 24.5
M4 1.50 0.76 2.70 3.6 M4 15.3 7.6 27.5 36.7
(M4.5) 2.15 1.08 3.9 5.2 (M4.5) 21.9 11.0 39.8 53.0
M5 3.00 1.50 5.4 7.2 M5 29.4 14.7 53.0 70.6
M6 5.2 2.60 9.2 12.2 M6 53.0 26.5 93.8 124
(M7) 8.4 4.2 15.0 20.0 (M7) 85.7 42.8 153 204
M8 12.5 6.2 22.0 29.5 M8 127 63.2 224 301
M10 24.5 12.5 44 59 M10 250 127 449 602
M12 42 21.0 76 100 M12 428 214 775 1020
M14 68 34 122 166 M14 693 347 1240 1690
M16 106 53 190 255 M16 1080 540 1940 2600
(M18) 146 73 270 350 (M18) 1490 744 2750 3570
M20 204 102 370 490 M20 2080 1040 3770 5000
(M22) 282 140 500 670 (M22) 2880 1430 5100 6830
M24 360 180 650 860 M24 3670 1840 6630 8770
(M27) 520 260 940 1240 (M27) 5300 2650 9590 12600
M30 700 350 1260 1700 M30 7140 3570 12800 17300
(M33) 960 480 1750 2300 (M33) 9790 4890 17800 23500
M36 1240 620 2250 3000 M36 12600 6320 22900 30600
(M39) 1600 800 2900 3800 (M39) 16300 8160 29600 38700
M42 2000 1000 3600 4800 M42 20400 10200 36700 48900
(M45) 2500 1260 4500 6000 (M45) 25500 12800 45900 61200
M48 2950 1500 5300 7000 M48 30100 15300 54000 71400
(M52) 3800 1900 6800 9200 (M52) 38700 19400 69300 93800
M56 4800 2400 8600 11600 M56 48900 24500 87700 118000
(M60) 5900 2950 10600 14000 (M60) 60200 30100 108000 143000
M64 7200 3600 13000 17500 M64 73400 36700 133000 178000
(M68) 8800 4400 16000 21000 (M68) 89700 44900 163000 214000
2
Standard axial stress 210 N/mm stress area of bolt(JIS 1082) Note : This is converted from Standard tightening torque N ・ m.
Note : This is not converted from standard tightening torque kgf ・ cm.
(Applicable products) Ordinary products Electronic products. Vehicles, Engines Construction products
55
TOHNICHI MFG. CO., LTD.
2-12, Omori-Kita 2-Chome, Ota-Ku,
Tokyo 143-0016, JAPAN
0 +81-(0)3-3762-2455
Fax +81-(0)3-3761-3852
E-mail overseas@tohnichi.co.jp
Website http://tohnichi.jp
N. V. TOHNICHI EUROPE S. A.
Industrieweg 27 Boortmeerbeek,
B-3190 Belgium
0 +32-(0)16-60 66 61
Fax +32-(0)16-60 66 75
E-mail tohnichi-europe@online.be
Website http://www.tohnichi.be
09.06.20000