Академический Документы
Профессиональный Документы
Культура Документы
2012
ENG
Founded in 1949, RCF built its history of sound
amplification from basic solutions for small
spaces to vast and complex digital systems for
theatres, shopping malls, airports, railway stations,
underground metro’s, exhibition centres, schools,
hospitals, sports arenas, stadia, hotels.
Our Product’s design and manufacturing are held
in the Reggio Emilia headquarters where more
than 240 people are employed ensuring the high
quality of RCF’s products and systems.
2
The continuing effort in research and development is a
strategic asset, in which the company invests a great
amount of human, financial and technical resource.
RCF has a complete International project design office. Our team has available
Professional Acousticians – Electronic System designers and Professional
Engineers that will work to provide project quotations and designs for any
system large or small. We work in partnership with Integrators, Consultants,
Engineering Companies from initial design through to final system
commissioning.
3
INDEX
MULTI-ZONE SYSTEMS 14
Paging and background music to different zones.
CONFERENCE SYSTEMS 20
Flexible, easy to use and install. Suitable for any small hall or council
chambers.
AUDIO SOURCES 34
CD players, Radio receivers, message players for every hi-fidelity
listening need.
RACK COMPONENTS 86
For the optimum management of the system configurations.
MOBILE AMPLIFICATION 92
Portable system for all the situations in which mobility is important.
ALPHANUMERICAL INDEX 96
4
EASYLINE SOLUTIONS PRODUCTS
HD 3216/T MG 80
p/n. 131.33.037 page 79 p/n. 131.40.011 page 92
5
SOUND SYSTEMS
EN 60849 NORM
COMPLIANT
To completely control and manage
background music and paging,
even for emergency and evacuation
purposes, with signals and controls
EN 60849 compliant.
6
DXT 7000 SYSTEM
MT 5708 -2 BM 5804 -3
1.100 g
452
44 377
ÃÃ The system has been designed to fulfil all requirements of EN 54-16 and EN ÃÃ Digital Matrix 7 x 8 is configurable for several applications witth routing to
60849 standard any output channel 39
387 483
ÃÃ Up to 32 MU 7100 EN can be linked together in order to get an extended ÃÃ Efficient Digital Signal Processor (DSP):
128 5-Band Parametric
203 EQ, High and Low
3 system including many paging stations and up to 256 loudspeaker lines / Pass Filters, Delay circuit for line array speaker applications, Compressor /
paging zones Limiter, Level controls are provided
BE 5808 -6 PU 5218 -7
ÃÃ The main unit can play all necessary evacuation and alarm messages ÃÃ An automatic level control facility can be got by simply connecting an omni-
previously stored into its built-in digital memory directional noise detection microphone to the inputs
ÃÃ The 8 digital internal amplifiers are highly reliable and their efficiency is ÃÃ Built-in WAV file message player (up to128 messages)
excellent (> 90%), that means less heat dissipation and smaller capacity ÃÃ Software Utility for saving unit parameters to PC,updating unit firmware,
requirement for unbreakable power supply sources (UPS) used in security virtual control activation and status indication
452
applications 203
ÃÃ Keylock Security sets password-protected access to the system
ÃÃ The whole signal path from fireman's microphone to loudspeaker lines is
ÃÃ An RS-232 132
PU 5218
completely and automatically monitored against faults serial port is available for external commands and monitoring
376
8 203 39 78
483
PB 5310 - 9 MU 7100 -10
88
158 375
63 DR 5301-P Data Repeater for Power Bridge
7
DR 5301 - 8 PB 5
158
63
13˙000 g 178
LT 7208 EN p/n 171.70.139 mm (mm)
88
382
8
483
ÃÃ The LT 7208 EN line transformer interface allows you to link/group the 8 amplifiers to increase the power of the speaker lines two, three or four times
ÃÃ If the needed speaker line power is more than 80W, several outputs (in groups made of 2, 3 or 4) can be connected together (in parallel) in order to get locked groups
for 160 W, 240 W or 320 W lines
ÃÃ Output line voltage setting (50 - 70 - 100 V) is made by changing the output tapping of each transformer
ÃÃ Includes also line specific 24V dc outputs for override relays (max. current: 1A / line)
ÃÃ Connection cable to MU 7100 EN main unit 8 pcs. of ‘end of line’ unit, used when the loudspeaker line monitoring is provided
ÃÃ The ‘end of line’ unit shall be installed right at the end of the line, near the last installed loudspeaker
SPECIFICATIONS LT 7208 EN EN
OUTPUT POWER 8 x 80 W RMS
CONSTANT VOLTAGE OUTPUT 100 V (70 V o r 50 V INTERNAL COMMUTATION)
INPUT IMPEDANCE 8 Ω BALANCED
OUTPUT CONNECTORS REMOVABLE SCREW TERMINALS
Used as local sound control device. It controls a zone group volume and Used for connection and routing of a local program source (mono signal, 3.5
operates as program selector. Connection to local or system bus by using mm balanced stereo plug). 3 function keys can be individually programmed,
CAT5/6 cabling. To be wall mounted by using with accessories provided. for example, to route local program source to desired loudspeaker lines.
To be wall mounted by using the accessories provided.
8
DXT 7000 SYSTEM
The board has 2 main 70-100V loudspeaker The SI 7120 board is a system monitoring A RO 7102 board can be directly connected
line inputs, spare amplifier input and output, module for the DXT 7000 system. to a pair of MU 7100 EN control outputs.
2 relays. AC 7212 terminal shall be directly It monitors the operation condition of 2 lines It converts the 2 MU 7100 EN open-collector
connected to a pair of LT 7208 EN loudspeaker coming from the fire alarm system to DXT 7000. ‘control outputs’ to 2 dry closing contacts that
50-70-100 V outputs. If a line is open or shorted, the SI 7120 board can be used as commands or external devices.
The LT 7208 EN override voltage output is used will detect the fault and activate a command. It also has resistors needed for monitored
to activate the AC 7212 relay in case of the main alarm lines.
amplifier is faulty and switch the spare amplifier
output to the respective loudspeaker line.
PS 4048 MT 7308EN
48 Vcc Power Supply Power amplifier manager
according to EN 54-4
p/n 171.70.159
p/n 171.70.158
9
DXT 7000 SYSTEM
BM 7608 BM 7608D
Microphone console with 8 Microphone console with
configurable buttons numeric keypad, LCD display and 8
p/n 143.22.015 configurable buttons
p/n 143.22.016
Paging microphone set monitored according to EN 54-16 norm. Paging microphone set monitored according to EN 54-16 norm.
The 8 configurable buttons can be programmed to send live microphone The 8 configurable buttons can be programmed to send live microphone
announcements in specific zones or groups of zones. announcements in specific zones or groups of zones.
There are dedicated buttons to access the emergency operation/functions, in The backlit LCD display reports several indications relevant to system operation
order to send pre-recorded security messages or microphone announcements. and monitoring . The numeric keypad permits quick selective paging in single or
It has a metal body and an high intelligibility microphone mounted on a multiple zones.
250mm gooseneck. Through a complete menu is also possible to address the music sources connected
One input on RCA stereo connector is available for the direct connection of to the MU 7100EN to the system zones and to adjust amplifier volumes.
a program source (i.e. CD player), to be sent through the same audio cannel
where the console is connected when paging is not in progress. There are dedicated buttons to access the emergency operation/functions, in order
The console is powered through the same system bus or through a local to send pre-recorded security messages or microphone announcements.
optional power supply. It has a metal body and an high intelligibility microphone mounted on a 250mm
The connection to the MU 7100EN master unit can be made by using a CAT 5 gooseneck.
cable or a J-Type 4 twisted pair cable (es. Fire resistant model RCF CJ 428E) . One input on RCA stereo connector is available for the direct connection of a
program source (i.e. CD player), to be sent through the same audio cannel where
the console is connected when paging is not in progress.
The console is powered through the same system bus or through a local optional
power supply.
The connection to the MU 7100EN master unit can be made by using a CAT 5
cable or a J-Type 4 twisted pair cable (es. Fire resistant model RCF CJ 428E) .
10
DXT 7000 SYSTEM
BM 7608DFM BM 7624D
Paging microphone set monitored according to EN 54-16 norm. Paging microphone set monitored according to EN 54-16 norm.
The 8 configurable buttons can be programmed to send live microphone The 24 configurable buttons can be programmed to send live microphone
announcements in specific zones or groups of zones. announcements in specific zones or groups of zones.
The backlit LCD display reports several indications relevant to system The backlit LCD display reports several indications relevant to system operation
operation and monitoring . The numeric keypad permits quick selective and monitoring . The numeric keypad permits quick selective paging in single or
paging in single or multiple zones. multiple zones.
Through a complete menu is also possible to address the music sources Through a complete menu is also possible to address the music sources connected
connected to the MU 7100EN to the system zones and to adjust amplifier to the MU 7100EN to the system zones and to adjust amplifier volumes.
volumes. There are dedicated buttons to access the emergency operation/functions, in order
There are dedicated buttons to access the emergency operation/functions, in to send pre-recorded security messages or microphone announcements.
order to send pre-recorded security messages or microphone announcements. It has a metal body and an high intelligibility microphone mounted on a 250mm
It has a metal body and an high intelligibility hand-held microphone. gooseneck.
It is the emergency paging panel usually installed close to the building access One input on RCA stereo connector is available for the direct connection of a
points used by the Firemen . program source (i.e. CD player), to be sent through the same audio cannel where
One input on RCA stereo connector is available for the direct connection of the console is connected when paging is not in progress.
a program source (i.e. CD player), to be sent through the same audio cannel The console is powered through the same system bus or through a local optional
where the console is connected when paging is not in progress. power supply.
The console is powered through the same system bus or through a local The connection to the MU 7100EN master unit can be made by using a CAT 5
optional power supply. cable or a J-Type 4 twisted pair cable (es. Fire resistant model RCF CJ 428E) .
The connection to the MU 7100EN master unit can be made by using a CAT 5
cable or a J-Type 4 twisted pair cable (es. Fire resistant model RCF CJ 428E) . Thanks to the modular construction, paging stations with 40, 56, 72, 88, 104 or
120 configurable buttons are available on request.
BM 7601
Desk-top paging The programmable button and the direct interfacing to the MU 7100EN system
unit offer great flexibility in terms of installation and use.
microphone with It has an high intelligibility microphone mounted on a 250mm gooseneck.
configurable button It is ideal as local console for paging a single zone or a group of zones.
The connection to the MU 7100EN unit can be made by using a CAT5 cable.
p/n 143.22.017
11
SE 5000 SYSTEM
MASTER UNIT
330 445
80
277 125 115 445
159
ÃÃ Slave amplifiers are typically249 used to extend loudspeaker
483 coverage in areas such as large warehouses. They also allow
greater flexibility to manage paging and background music as
they have their own paging and background music inputs
ÃÃ Wall mount enclosure
SPECIFICATIONS SE 5120
OUTPUT POWER 2 x 60 W RMS
FREQUENCY RESPONSE 150 ÷ 20.000 Hz (± 1 dB)
INPUT SENSITIVITY SE 5120 - 14 -10 ÷ +10 dBu (0.23 ÷ 2.3 V) - 15
BM 5001WM
BM 7806 -13
POWER SUPPLY 230 V a.c +/- 10% @ 50 - 60 Hz
INPUT CONNECTORS REMOVABLE SCREW TERMINALS
OUTPUT CONNECTORS REMOVABLE SCREW TERMINALS
80
BM 5001WM p/n 171.70.087 BM 4601 p/n 171.70.074
445 350
360 335
88
SYSTEM CONTROLLER STATUS SUPPLY
MAIN
CP FAULT
AUX
270
RX 4000 - VOICE ALARM SYSTEM
75 30
445 483 100 200
285 300 145
BM 4601 - 18
R 5006EN - 19 LD 5002EN - 20
3˙400 g 500 g
mm mm
360 335
ÃÃ Wall mount microphone in housing for evacuation system Sound Vault Dual Message Player
ÃÃ Metal body with 300 mm gooseneck
41 Message
1 2 3 4
Status
Switch Audio Module
Power
12
nd Vault Dual Message Player
Message Status Power
1 2 3 4 Switch Audio Module
88 CP
270
RX 4000 - VOICE ALARM SYSTEM
75
483
PREAMPLIFIERS AND PLAYERS
PR 5006EN - 19 LD 500
3˙000 g
483
80
SPECIFICATIONS PR 5006EN
AUDIO OUTPUT LEVEL 277 125 0 dBu (0.775 V RMS) 115 445
OUTPUT IMPEDANCE 600 Ω BALANCED
FREQUENCY RESPONSE CP 4001 -16 BMHz4716
30 ÷ 30.000 - 17
(± 1 dB) BM
DISTORSION (THD+N) < 0.05% @ 1 kHz
DYNAMIC ≥ 90 dB @ RMS
SIGNAL/NOISE RATIO > 70 dB
INPUT SENSITIVITY 0 dBu (0.775 V RMS) 360
INPUT IMPEDANCE
88 CP
10 KΩ UNBALANCED
270
RX 4000 - VOICE ALARM SYSTEM
PR 5006EN - 19 LD 5002EN - 20
865 g
44 136
Module 1
Module 2
159
249
483
SPECIFICATIONS LD 5002EN
AUDIO OUTPUT LEVEL 0 dBu (0.775 V RMS)
SAMPLING FREQUENCY 16 kHz 16 bit
STORAGE 2 MODULES OF 4 MESSAGES EACH (MAX 30 SECONDS EACH MODULE)
INPUT SENSITIVITY 0 dBu (0.775 V RMS)
CONSUMPTION 100 mA @18 - 36V CC, EXTERNAL SELECTOR
POWER SUPPLY 24 V cc
CONNECTORS REMOVABLE SCREW TERMINALS
13
MULTI-ZONE
SYSTEMS
Paging and background music to
different zones.
14
438 325 165
CS 1066 SYSTEM
RU 8020 - 4 BM 3067 - 5 PD 106
1˙800 g
MULTI-ZONE SYSTEMS
ÃÃ Cardioid dynamic microphone on 320 mm gooseneck; plastic
base
BA 1040-PCU - 7 ÃÃ 6BAkeys1040-SA -8
for zone selection, a general call key, a PTT key, an
alarm key (to control the internal siren)
ÃÃ Up to 10 paging microphones can be linked in series (priority
/ interlocking configurable)
ÃÃ 4 modes: mixed, interlocking, mixed with 2 microphones
BA 1040 System Amplifier FAULT POWER
2˙800 g
6 ZONE SPEECH
160 / MUSIC SWITCHING 44 160
UNIT 70
483 200 483
132
ÃÃ 6 paging keys (one per zone)
ÃÃ 6 music on / off keys (one per zone)
ÃÃ General call key (to switch all the 6 paging relays on)
BA 1040-SA - 8 ÃÃ All the front panel keys have an LED
ÃÃ 2 possibile wiring modes:
- amplifiers after the PD 1066 switching unit -
amplifiers before the PD 1066 switching unit
BA 1040 System Amplifier FAULT POWER
CA 40 CA 3000
CABLE CABLE
p/n 143.40.020 p/n 123.10.020
ÃÃ 6 pole connection cable (1 screened pair + 2 pairs ÃÃ 10 pole screened cable (for selection / controls), to
for audio / controls) to connect BM 3067 paging connect BM 3067 paging microphone, available in 100 m
microphones, available in 100 m coils (note: its p/n refers coils (note: its p/n refers to 1 m)
to 1 m)
15
SPA 8000 SYSTEM
MS 520 - 1 BM 8001 - 2 RM 80
1˙800 g
RU 8020 - 4 BM 3067 - 5 PD 10
ÃÃ The system allows up to 6 operators to page system zones
selectively and keep backgrund music in non-paged zones
ÃÃ It allows to send prerecorded messages (max. 12 each) stored
on (optional) dedicated players (i.e. RCF RD 2008 digital message
recorder)
270
ÃÃ The alarm key, having the highest priority, starts the
44 160 prerecorded message no.1 (if stored on an optional message 44
70 the system general call
recorder) and allows
483 ÃÃ Up to 6 BM 8001 paging 132 microphones200 (having a 6 level
graduated priority) can be connected to the system
ÃÃ Automatic all zone on / off function.
ÃÃ Up to 4 zone groups can be stored and recalled. Automatic
BA 1040-PCU - 7 release of paging function
BA 1040-SA -8 in the activated microphone, if not
used for a certain time
ÃÃ The max. distance from the last BM 8001 paging microphone
and the RU 8020 control unit is 400 m
BA 1040 System Amplifier FAULT POWER
290
88
50
SPECIFICATIONS BM 8001 262
220 160
TYPE ELECTRET, CARDIOID 216
IMPEDANCE 600 Ω BALANCED
FREQUENCY RESPONSE 200 ÷ 6000 Hz
CONNECTORS 15 POLE 'D' TYPE
POWER SUPPLY 19 ÷ 24 V dc
BM 8001 - 2 RM 8080 - 3
3˙300 g
290
88
438
2˙800 g
RU 8020 p/n 125.10.056 mm
8 ZONE SWITCHING UNIT 44 160
483
MULTI-ZONE SYSTEMS
ÃÃ It provides speech / music switching in 8 zones selectively (max. 31
zones with 4 RU 8020)
ÃÃ The selection of zones to be paged (in which the music is BA
BA 1040-PCU
muted) is made -by7BM 8001 paging microphones
ÃÃ The 8 front panel keys allow to switch on / off the background
music in their respective zone
ÃÃ 2 possibile wiring modes:
- amplifiers after the RU 8020 switching unit 290
- amplifiers before the RU 8020 switching unit
88
ÃÃ 2 inputs
50 for either amplifiers or preamplifiers;
ÃÃ 8 outputs for speakers or amplifiers
160 call
2202A) active on general
ÃÃ Auxiliary relay (max.
SPECIFICATIONS RU 8020
MAX. POWER PER ZONE (AMPLIFIERS BEFORE RU 8020) 500 W (100 V); 350 W (70 V); 250 W (50 V); 125 W (25 V);
INPUTS 2
OUTPUTS 4+4
GENERAL CALL REMOTE COMMAND THROUGH EXTERNAL CONTACT OR 10÷24 V dc POWER SUPPLY
LOUDSPEAKER RELAYS 8 (MAX. CURRENT ON EACH RELAY CONTACTS: 5 A)
AUXILIARY RELAY 1 (MAX. CURRENT: 2 A)
POWER SUPPLY 230 / 115 V ac (50 / 60 Hz)
SECONDARY POWER SUPPLY 24 V dc
INPUT / OUTPUT CONNECTORS SCREW TERMINALS
17
RCF 'AMBIENTE' SYSTEM
ÃÃ MS 520 contains all functions required by a system to send different musical ÃÃ The third music source input can have priority (when enabled) over the other
programmes in homes and commercial premises two music sources
ÃÃ Three different musical programmes and one for paging can be sent to five ÃÃ Power outlet controlled by the system to switch a connected sound sources
mono zones or, alternatively, 3 mono zones and one stereo zone on/off
ÃÃ It is also possible link two RCF AMBIENTE and share the music sources in ÃÃ Black label provided for front panel
order to extend the number of zones to ten
ÃÃ Its backlit display and function keys make it possible to access all menus to
configure and adjust the system: volume, tone, loudness, output settings,
'VOX'
MS 520 - 1 BM 8001 - 2
3˙000 g
mm
44 253 75
438
SPECIFICATIONS MS 520
OUTPUT POWER 5 x 20 W RMS
RU 8020 - 4 BM 3067 -
FREQUENCY RESPONSE 20 ÷ 18000 Hz (± 3 dB)
T.H.D. < 0.5% @ 1 kHz
MIN. OUTPUT LOAD (PER ZONE) 4Ω
TONE CONTROLS LOW: 100 Hz ± 8 dB; HIGH: 12.5 kHz ± 8 dB
SIGNAL / NOISE RATIO > 60 dB44
(PAGING IN); > 78 dB (MUSIC SOURCE IN, DIRECT IN) 160
(MIC) - 58 dBu ÷ - 41 dBu (1 ÷ 7 mV);
483(LINE) - 43 dBu ÷ -27 dBu (5.5 ÷ 35 mV);
INPUT SENSITIVITY
(MUSIC, DIRECT) - 16 dBu (120 mV)
18
290
88
RCF 'AMBIENTE' SYSTEM
MS 520
REAR PANEL VIEW
MULTI-ZONE SYSTEMS
ÃÃ Five amplified 20 W / 4 ohm outputs, each also available as full-range or low- ÃÃ The VOX function can be matched to a zone group to work without pressing
pass signal at line level on RCA connectors to drive external power amplifiers keys or closing contacts (e.g. from a suitable private telephone exchange)
(when areas to be covered are particularly large)
ÃÃ For each zone, an RJ 45 connector allows the connection of remote controls
ÃÃ A direct auxiliary input is available for each of the five zones to connect (max. 3 per zone) via CAT5 cable for volume control, musical programme
sources such as CD players, wireless microphones or mixers to be used selection or direct input activation installable in any electrical mounting box
exclusively for one zone/room by using the original local country supports and cover-plates
ÃÃ The universal MIC-LINE input can be used for paging, with the possibility to
have a tone that precedes the announcement
Designed to be simply inserted into any 503 flush / wall mounted box
using original standard supports and cover-plates that can be found on
the market.
It allows to select programmes and adjust the volume in the respective
zone. It can turn the MS 520 in stand-by mode as well.
It can be linked to a MS 520 by using CAT5 cables and RJ 45 plugs.
Available in white (W), grey (G) and silver (S)
* The picture above shows a possible installation of the RC 62 remote control (box, front plate, blank keys are not included).
19
CONFERENCE
SYSTEMS
Flexible, easy to use and install.
Suitable for any small hall and council
chambers.
20
DI.CO SYSTEM
CONFERENCE SYSTEMS
DELEGATE'S MICROPHONE 132 200
p/n 143.40.014
p/n 123.10.001
p/n 143.40.020
21
MICROPHONES
AND WIRELESS
MICROPHONES
Optimised in the voice frequency range
to guarantee maximum speech clarity.
22
MICROPHONES - WIRELESS MICROPHONES
MODEL BM 3001 BM 3003 BM 3022 BM 3014
TYPE Electret Electret Electret Dynamic
POLARN PATTERN Cardioid Cardioid Cardioid Cardioid
FREQUENCY RESPONSE 50 ÷ 18000 Hz 50 ÷ 18000 Hz 100 ÷ 12000 Hz 100 ÷ 12000 Hz
SENSITIVITY (0 dB=1V/µbar, 1kHz) - 65 dB - 65 dB - 82 dB - 80 dB
POWER SUPPLY 18 ÷ 48 V PHANTOM 115 - 230 V ac / 24 V dc 115 - 230 V ac / 24 V dc -
CONNECTORS RJ 45 RJ 45 RJ 45 3 pole XLR (M)
ON/OFF SWITCH Yes Yes Yes Yes
USE Announcements Announcements Announcements Announcements
23
MICROPHONES 270 270
70 70
132 200 132 200
290 g
MD 7600 BM 3013 - 15
p/n 141.15.014 mm
MD 7600 - 16 MD 7
DYNAMIC MICROPHONE
270 48
70
180
132 200
MP 321 - 18 MP 301 - 19 MP
195 ÃÃ Typical use: speech, singing
ÃÃ Supercardioid dynamic microphone
ÃÃ Anti-pop filter
152 ÃÃ ON/OFF switch with lock
67
ÃÃ Minimum handling noise
ÃÃ 5 metre balanced and screened cable with 3 pole XLR
146 84 connectors 75
included 83
BM 4072 - 13 ÃÃ Mic.
BMholder
3014for- 14
stands and soft bag included
MP 341 - 21
SPECIFICATIONS MD 7600
TYPE DYNAMIC, SUPERCARDIOID
270
IMPEDANCE 270 500 Ω ± 30% (1 kHz) 270
SENSITIVITY - 75 dB ± 3 dB (0 dB=1V/µbar, 1kHz)
FREQUENCY RESPONSE 98 70 60 ÷ 16000 Hz
70
32 200 CONNECTORS 132 200 3 pole XLR (m) 132 200
200
222
MD 7600 - 16 MD 7800 - 17
305 g
180 180
32 200
MP 301 - 19 MP 302 - 20
5
16
152 67
ÃÃ Typical use: speech, singing
ÃÃ 5 dynamic microphone21
Professional supercardioid
ÃÃ Anti-pop filter 9
84 75 83
ÃÃ ON/OFF switch with lock
ÃÃ Minimum handling noise
ÃÃ 5 metre balanced and screened cable with 3 pole XLR
connectors included
ÃÃ Mic. holder for stands and soft bag included
specifications MD 7800
TYPE DYNAMIC, SUPERCARDIOID
IMPEDANCE 600 Ω ± 30% (1 kHz)
200
222 SENSITIVITY - 70 dB ± 3 dB (0 dB=1V/µbar, 1kHz)
FREQUENCY RESPONSE 60 ÷ 20000 Hz
CONNECTORS 3 pole XLR (m)
24
63
7
9
B
5
mu te
ON /
3
pw r
1
DESKTOP MICROPHONES
line
pe ak
mic
D - 8 64,1 75
E - 8 64,5 50
F - 8 64,9 50
- 8 63,8 00
sn s
8 63,4 25
863,0 50
58,9 75
58,6 50
30 90
200 MC
g 4040 - 10 MT
MC 4040
ON
TX
MUTE
MIC
672
35
OFF
110
220 245
1
line
pe ak
mic
SENSITIVITY
D - 8 64,1 75
- 58 dB ± 3 dB (0 dB=1V/µbar, 1kHz)
E - 8 64,5 50
F - 8 64,9 50
- 8 63,8 00
sn s
8 63,4 25
863,0 50
58,9 75
58,6 50
MC 4040 - 10 MT 3100 - 11
130 g
MT 3100 172
p/n 141.10.079
13
mm
25
UHF WIRELESS MICROPHONES
26
UHF WIRELESS MICROPHONES
TX 4016 PX 4116
UHF true DIVERSITY SYSTEM - HAND HELD TX UHF true DIVERSITY SYSTEM - POCKET TX
700 g
7
9
B
5
mu te
ON /
3
pw r
1
line
pe ak
mic
D - 8 64,1 75
E - 8 64,5 50
F - 8 64,9 50
PAGING MICROPHONE
- 8 63,8 00
sn s
8 63,4 25
863,0 50
58,9 75
58,6 50
600 g
48
p/n 143.22.012
90 mm
BM 3003 30
ÃÃ Plastic body with 300 mm gooseneck
100 159
mm
PAGING MICROPHONE
BM 4072 - 13 BM 3014 - 14
70 70
200 132 200 132 200
180 180
200
MP 301 - 19 MP 302 - 20
DATI TECNICI BM 3014
TYPE DYNAMIC, CARDIOID
IMPEDANCE 500 Ω BALANCED 16
FREQUENCY RESPONSE 100 ÷ 12000 Hz
152 67
SENSITIVITY - 71 dB ± 3 dB (0 dB=1V/µbar, 1kHz)
CONNECTORS 3 pole XLR 5 21
9
28 84 75 83
AS 1606 - 5 TX 1600 - 6
PAGING MICROPHONES 48
44 110
140
222 483 190
295 g
MC 5030
63 350 340
7
9
B
5
3
1
D - 8 64,1 75
E - 8 64,5 50
F - 8 64,9 50
- 8 63,8 00
8 63,4 25
863,0 50
58,9 75
58,6 50
48 30
90 100 159 80
MT 3100 - 11
SPECIFICATIONS MC 5030
TYPE ELECTRET, CARDIOID
IMPEDANCE 200 Ω BALANCED
FREQUENCY RESPONSE 80 ÷ 14000 Hz
SENSITIVITY - 75 dB ± 3 dB (0 dB=1V/µbar, 1kHz)
CONNECTORS 3 pole XLR
600 g
270
70
132 200
BM 3013 - 15 MD
ÃÃ Gooseneck microphone with hi-quality unidirectional
ÃÃ electret capsule
ÃÃ Direct connection to power amplifiers input through
CAT5 cable 270
ÃÃ Adjustable line output with RJ45 connector
70
ÃÃ Switchable automatic gain control (AGC)
ÃÃ Up to 30 BM 3022 paging microphones
132 200
ÃÃ can be linked in a ‘daisy-chain’
ÃÃ Selectable mixing, interlocking or priority mode
MP 321 - 18
among devices MP
ÃÃ When activating a microphone,
195 the announcement
can be preceded by a chime.
ON
TX
PAGING35MICROPHONES
MUTE
MIC
OFF
110
220 245
AS 1606 RX 1600 - 4
1˙600 g
AS 1606 - 5
UHF DIVERSITY ANTENNA SPLITTER p/n 143.80.004
mm
38 44 110
140
222 483
3
pw r
1
ÃÃ 1U (19") rack unit
line
pe ak
mic
D - 8 64,1 75
E - 8 64,5 50
F - 8 64,9 50
- 8 63,8 00
sn s
8 63,4 25
863,0 50
58,9 75
58,6 50
48
30 90 100 159
MC 4040 - 10 MT 3100 - 11
172
13
21 189
Directional preamplified UHF antenna, 1U 19" rack kit suitable for RG 223U cable to connect remote UHF Kit made of six RG 223U
power supplied by the AS 1606 splitter, 1 or 2 receivers antennas. Available in 100 m coils. (6 pole) cables to connect the AS 1606
to be used in large areas. (models: RX 1000 or splitter to three
RX 1600). RX 1600 diversity receivers.
30
ACCESSORIES
Microphone support Universal quick-release clamp holder for holding 5 m microphone cable with XLR
(5/8" thread). cylindrical, conical, and polyhedron shaped connectors.
Suitable for use with the MD microphones.
7600, MD 7800 microphones on Clamp opening: from 15 to 38 mm. Suitable for
AC S64FL, use with TX 1000 / TX 1600 / TX 516 wireless
AC S62FL and AC S50DK supports. mic. on AC S64FL, AC S62FL and AC S50DK
supports.
31
MP 300 SPEAK THROUGH SYSTEM
270 270
SPECIFICATIONS MP 300
MICROPHONES 70 70 UNIDIRECTIONAL
ELECTRET, 70
AMPLIFIER POWER 2 W (per each line)
132
ADDITIONAL LOUDSPEAKER OUTPUT 200 1W-8Ω 132 200 132
POWER SUPPLY (AC) 230 / 115 V (50 / 60 Hz)
POWER SUPPLY (DC) 12 V
BM 3013 - 15 MD 7600 - 16 MD 7800 - 17
270 48
MP 321
70 p/n 124.01.008
OPERATOR MICROPHONE
132 200
180 180
32 MP 341 - 21
132 200
MPMD300
7800 - 17
SPEAK THROUGH SYSTEM
48 48
MP 302 p/n 124.01.007
MP 302 - 20
3.5 g
mm
270 270
16
70 ÃÃ Electret microphone 70having high sensitivity and an unidirectional polar pattern, suitable for clear
67 voice reproduction even in very noisy rooms / halls
BM 3002 - 12 132 200 BM 4072 - 13 132 200sleek contemporary design BM 3014 - 14
ÃÃ Its compact white plastic enclosure has a very
5 21
ÃÃ MP 302 has a slot (close to the audio cable output) for the insertion of a standard wiring duct
9 ÃÃ It can be 7800
easily attached
MD 7600 - 16 MD - 17 on safety glasses through bi-adhesive tape
ÃÃ 5 m balanced and screened cable for connection to the MP 341 control unit / amplifier
270 270
70 70 70
48 48
132 200 132 200 132
MP 301
BM 3013 - 15
180
p/n 124.01.006
180
MD 7800 - 17
LOUDSPEAKERS MD 7600 - 16
MP 301 - 19 MP 302 - 20
120 g
mm 270 48
16
ÃÃ MP 301 loudspeakers shall be installed near the microphones of the operator and users
52 70 67 ÃÃ White plastic body
180 180
132 200 ÃÃ 70 mm loudspeaker suitable for voice reproduction 21
5
ÃÃ Loudspeakers can be fixed by using biadhesive tape (included)
9
MP 32175- 18 83 ÃÃ 5m loudspeaker
MP 301cables
- 19for connection to the MP 341 control unit / amplifier MP 302 - 20
195
16
152 67
mm
98
200
222
ÃÃ It is the system main unit that manages audio signals coming from microphones.
ÃÃ 4 switches inside (with LEDs) allow to select one of the 4 operating modes, according to the
noise level at the operator's microphone and at the users' microphone. A switch for each
line makes it possible to select either the 'direct' function (the line is always activated) or the
'switched' mode (the line is momentary activated when speaking). If both lines are set to the
'switched' mode, only one can be activated at a time. The other 2 switches enable the 'forced
volume' function of each line, useful whenever it is necessary to increase (+ 10 dB) the audio level
ÃÃ It is possible to adjust the listening volume of each position independently, as well as the trigger
threshold level of each microphone (factory preset)
ÃÃ Its plastic enclusure can be wall mounted
33
AUDIO SOURCES
CD players, Radio receivers, message
players for every hi-fidelity listening
need.
ÃÃ Double sound source with two independent sections and outputs (Tuner - CD/Mp3)
ÃÃ CD player to reproduce audio tracks and MP3 files from
a compact disc (CD, CD-R, CD-R/W) or from the USB drive ("Flash" memory-stick with only MP3 files)
ÃÃ The USB port is available on both front and back panels
to provide maximum flexibility
ÃÃ The SD card port is available on front panels
ÃÃ LCD backlit display gives information on the CD and MP3 files
ÃÃ I/R remote control for CD and Tuner included
ÃÃ FM radio tuner (87.5 - 108 MHz) with possibility to memorize your 30 favourite radio stations
ÃÃ Stereo / Mono selector for applications where stereo signals
are not needed
ÃÃ LCD backlit display shows the frequency and stations that are in the memory
34
AUDIO PLAYERS
AUDIO SOURCES
MS 1033 -1 ST 6001
REAR VIEW 3˙600 g
mm
44 97
250
482
SPECIFICATIONS MS 1033
AUDIO OUTPUT LEVEL +4 dBu ± 2 dBu (1.2 V ± 0.2 V)
FREQUENCY RESPONSE 20 ÷ 20.000 Hz (CD); 100 ÷ 12.000 Hz (RADIO)
DISTORTION (THD+N) < 0.1% (CD); < 0.8% (RADIO)
FREQUENCY RANGE 87.5 ÷ 108 MHz (FM)
SIGNAL TO NOISE RATIO > 70 dB (CD); > 60 dB (RADIO)
CHANNEL SPLIT ≥ 60 dB (CD); ≥ 30 dB (RADIO)
SENSITIVITY ≤ 10 V
SUPPLY VOLTAGE 220 ÷ 240 V / 110 ÷ 120 V (50 / 60 Hz)
OUTPUT CONNECTORS RCA (L&R RADIO); RCA (L&R CD USB/MP3); RCA (L&R MIXED)
35
AMPLIFIERS AND
PREAMPLIFIERS
For constant voltage systems or
professional audio applications.
37
CD-USB/MP3 DIGITAL RECEIVER AMPLIFIERS
HC 2000
Channel 2
132
88
On Mute Sign Lim Temp On Mute Sign Lim Temp
ES 3323 UP 2162
REAR VIEW 10˙100 g
mm
88
127
345
444
SPECIFICATIONS ES 3323
AM 2080 IS 1044
OUTPUT POWER 320 W
FREQUENCY RESPONSE 50 - 18.000 Hz (± 3 dB)
DISTORTION (THD+N) < 0,3% @ 1 kHz
SPEAKER OUTPUTS 100 V, 70 88
V, 4 Ω (MONITOR MAX 2 W)
AUXILIARY OUTPUTS 600 Ω, -1 dBu (690 mV)
44
220
SIGNAL TO NOISE RATIO 444
> 65 dB (INPUTS 1-4); > 75 dB (AUX IN); > 85 dB (MAIN IN)
(MIC) -58 dBu (1 mV); (MIC PHANTOM) -28 dBu (30 mV);
INPUT SENSITIVITY
(AUX) -11 ÷ +10 dBu (0.2 ÷ 2.5 V)
(MIC) 10 KΩ; (AUX) 20 KΩ
INPUT IMPEDANCE
(MIC) 10 kΩ; (MIC PHANTOM) 6.5 kΩ; (LINE): 10 kΩ; (AUX): 20 kΩ
SUPPLY VOLTAGE 220 ÷ 240 V / 110 ÷ 120 V (50 / 60 Hz) INTERNAL SETTING
POWER CONSUMPTION 600 W
INPUT CONNECTORS 1 x XLR, 2 x RJ 45, 4 x TERMINAL
4 x RCA (MUSIC ON HOLD, PRE-OUT, INTERNAL PROGRAM),
OUTPUT CONNECTORS
SCREW TERMINALS FOR CONSTANT VOLTAGE LINES
The paging microphone allows to make selective calls to 3 zones and is Rack mounting support, 3U.
the ideal complement of the ES 3323 mixer amplifier (through CAT 5 cable
and RJ 45 connector)
38
CD-USB/MP3 DIGITAL RECEIVER AMPLIFIERS
ES 3160 - 1 PR 4092 - 2
REAR VIEW 8˙000 g
mm
44
4092
PREAMPLIFIER
127
345
444
AM 1122 - 4 AM 2160 - 5
SPECIFICATIONS ES 3160
OUTPUT POWER 160 W
FREQUENCY RESPONSE 50 ÷ 18.000 Hz (± 3 dB)
DISTORTION (THD+N) < 0.3% @ 1 kHz
88
SPEAKER OUTPUTS 100 V, 70 V, 4 Ω INPUTS TONE MASTER
88
AM 1122-N
MIXER AMPLIFIER
88
INPUT CONNECTORS 1 x XLR, 2 x RJ 45, 4 x TERMINAL
315
4 x RCA (MUSIC ON HOLD, PRE-OUT,433
INTERNAL PROGRAM),
OUTPUT CONNECTORS
SCREW TERMINALS FOR CONSTANT VOLTAGE LINES
ED 600 - 10 ED 1100 - 1
88 ED 600
88
Dedicated microphone console with Cat5 connection cable and RJ45 Rack mounting support, 3U. 350
connector.
483
39
HC 2000 - 13 HC 3200 - 1
POWER AMPLIFIERS
88
220 88
INPUTS TONE MASTER
88
AM 1122-N
MIXER AMPLIFIER
260 444
420
UP 4121 - 7 UP 4242 - 8 FLEXA - 9
SPECIFICATIONS AM 2160 - AM 2320
OUTPUT POWER 160 W (AM 2160) - 320 W (AM 2320)
FREQUENCY RESPONSE 50 Hz ÷ 18.000 kHz
DISTORTION (THD+N) UP 4000-SERIES P.A. POWER UNIT
< 0.3% @ 1 kHz UP 4000-SERIES P.A. POWER UNIT
88 TONE VOLUME
88 VOLUME
2 x RCA (MUSIC 88
ON HOLD, PRE-OUT), SCREW TERMINALS FOR SPEAKERS
ED 1100
88
350 350
483 483
HC 3200
Channel 2
88
132
Professional Stereo Amplifier
Channel 1 Channel 2
HC 2000
88
455 455
40
483 483
POWER AMPLIFIERS
command
HC 2000
88
On Mute Sign Lim Temp On Mute Sign Lim Temp
455 of an
ÃÃ The inputs 2 also has an RJ 45 port for quick connection
RCF BM 3001 paging microphone (through CAT5 cable)
483
ÃÃ The 2 mic-line inputs have a high-pass filter that are useful to
improve speech intelligibility
ÃÃ 2 Aux inputs with tone controls, selectable with two keys on
ES front
the 3323 panel UP 21
ÃÃ A ‘MUSIC ON HOLD’ aux output allows to send the music to
additional amplifiers, mixers, phone systems
ÃÃ A ‘PRE OUT’ aux output is useful to send the signal to
additional amplifiers
ÃÃ Digital Chime built-in generator 88
ÃÃ The
127amplifier output is available either for low impedance
loudspeakers (min. 4 Ω) or 100 - 70 V constant voltage
345line
(for loudspeakers having 100 - 70 V transformers)
444
ÃÃ Front panel LEDs indicate the device state (ON, PROT), priority
circuit enabled (PRIOR) and the signal level / peak (SIG/PK)
AM 2080
REAR VIEW 3˙800 g
IS 1044
mm
88
44
220
444
SPECIFICATIONS AM 2080
OUTPUT POWER 80 W
FREQUENCY RESPONSE 50 - 18.000 Hz (± 3 dB)
DISTORTION (THD+N) < 0,3% @ 1 kHz
SPEAKER OUTPUTS 100 V, 70 V, 4 Ω
AUXILIARY OUTPUTS 600 Ω, -1 dBu (690 mV)
SIGNAL TO NOISE RATIO > 60 dB (INPUTS 1-2); > 80 dB (AUX IN)
(MIC) -62 dBu (1 mV); (MIC PHANTOM) -28 dBu (30 mV);
INPUT SENSITIVITY
(AUX) -18 ÷ +20 dBu (0.1 ÷ 7 V)
INPUT IMPEDANCE (MIC) 10 kΩ; (MIC PHANTOM) 10 kΩ; (AUX) 20 KΩ
SUPPLY VOLTAGE 220 ÷ 240 V / 110 ÷ 120 V (50 / 60 Hz) INTERNAL SETTING
POWER CONSUMPTION 80 W
INPUT CONNECTORS 1 x XLR, 1 x RJ 45, 2 x TERMINAL, 2 x DOUBLE RCA (AUX)
OUTPUT CONNECTORS 2 x RCA (MUSIC ON HOLD, PRE-OUT), SCREW TERMINALS FOR CONSTANT VOLTAGE LINES
41
POWER AMPLIFIERS
REAR VIEW
10˙000 g
12˙000 g
mm
TONE MASTER
88
INPUTS
385
BASS TREBLE
POWER
431
42
POWER AMPLIFIERS
POWER
385
431
SPECIFICATIONS UP 1121
OUTPUT POWER 120 W
FREQUENCY RESPONSE 60 - 15.000 Hz (± 3 dB)
DISTORTION (THD+N) < 1,5
SPEAKER OUTPUTS 100 V, 70 V, 4 Ω
AUXILIARY OUTPUTS 100 V (167 Ω) – 70 V (83 Ω) – 4 Ω
SIGNAL TO NOISE RATIO > 80 dB
INPUT SENSITIVITY 1 V (+ 2 dBu)
INPUT IMPEDANCE 10 kΩ (balanced)
SUPPLY VOLTAGE 115 V / 230 V ~, 24 V dc
POWER CONSUMPTION 350 W
INPUT CONNECTORS Screw terminals
OUTPUT CONNECTORS Screw terminals for speakers
43
345 482 120
483
POWER
AM 2160AMPLIFIERS
-5 UP 1123 - 6
MASTER
AM 1122-N
UP 2081 88 p/n 121.35.071
220 88
TONE MASTER
UP 1123
UP 2161
MIXER AMPLIFIER
VOLUME
88 VOLUME
FLEXA
433 through CAT5 cable)
6081 6241
370 6320
HC 1600
Channel 2
88 ED 1100
88 having 100 - 70 V transformers)
350 350 455
ÃÃ Front panel LEDs indicate the device state (ON, PROT), the priority
483 activation (PRIOR) 483
and the signal/peak level (SIG/PK)
Channel 1
Professional Stereo Amplifier
HC 3200
Channel 2
88
Channel 2
132 220
455 455 444
483
SPECIFICATIONS UP 2081 - UP 2161 - UP 2321
OUTPUT POWER 80 W (UP 2081) - 160 W (UP 2161) - 320 W (UP 2321)
FREQUENCY RESPONSE 50 Hz ÷ 18.000 kHz
DISTORTION (THD+N) < 0.3% @ 1 kHz
SPEAKER OUTPUTS 100 V, 70 V, 4 Ω
SIGNAL TO NOISE RATIO > 60 dB (INPUTS 1-4); > 80 dB (AUX IN)
(MIC) -58 dBu (1 mV); (MIC PHANTOM) -21 dBu (70 mV); (LINE) 0 dBu (775 mV); (AUX)
INPUT SENSITIVITY
- 6 ÷ +13 dBu (0.39 ÷ 3.5 V)
INPUT IMPEDANCE (MIC) 10 kΩ; (MIC PHANTOM) 5 kΩ; (LINE): 10 kΩ; (AUX): 20 kΩ
SUPPLY VOLTAGE 230 V / 115 (50 / 60 Hz) - INTERNAL SETTING
POWER CONSUMPTION 160 W (UP 2081) - 240 W (UP 2161) - 440 W (UP 2321)
INPUT CONNECTORS 1 x XLR, 1 x RJ 45, 1 x SCREW TERMINALS, 1 x DOUBLE RCA (AUX)
OUTPUT CONNECTORS SCREW TERMINALS FOR SPEAKERS
44
POWER AMPLIFIERS
HC 2000
88
On Mute Sign Lim Temp On Mute Sign Lim Temp
455 ÃÃ Front panel LEDs indicate the device state (ON,455PROT), the priority
activation (PRIOR) and the signal/peak level (SIG/PK)
483 483
7˙000 g
mm
88
127 220
345 444
444
AM 2080 IS 1044
45
44
POWER AMPLIFIERS 127
345
444
AM 1122 - 4 AM
10˙000 g
INTEGRATED AMPLIFIER
88
INPUTS TONE MASTER
88
AM 1122-N
MIXER AMPLIFIER
260
420
UP 4121 5-input
ÃÃ 120W - 7 Mixer-Amplifier UP 4
ÃÃ 4 universal XLR inputs with independent volume controls
ÃÃ 21V phantom power switch
ÃÃ RCA stereo aux input
ÃÃ Auxiliary direct input to power amplifier only
UP 4000-SERIES P.A. POWER UNIT
88
315
ÃÃ REC/LINE output on RCA stereo connector
ÃÃ 433
PRE-OUT/MAIN-IN connections
ÃÃ Built-in Chime generator with remote activation through
contact closure
ED 600 - 10
ÃÃ Master volume control with LED VU-meter
ED 1
ÃÃ Treble and bass controls
ÃÃ Convection cooling for long-term safe operation
ÃÃ Power supply 115/230Vac or direct current 24V
ÃÃ 19'' rack mount 2U (accessory included)
PR 4092 - 2 MX 1822 - 3
SPECIFICATIONS AM 1122-N 88 88
ED 600
350
OUTPUT POWER / FREQUENCY RESPONSE 120 W / 50 ÷ 15.000 Hz (± 3 dB)
DISTORTION (THD+N) < 2% @ 1 kHz 483
SPEAKER OUTPUTS 100 V, 70 V, 4 Ω
AUXILIARY OUTPUTS 600 Ω, 1V (0 dBv / +2 dBu), UNBALANCED (PRE-OUT, LINE-OUT)
266
44
CHIME INPUTS OUTPUTS
HC 3
4092 A
200
> 60 dB (INPUTS HC
1-4);2000 - 13
PREAMPLIFIER
INPUT SENSITIVITY (MIC) -54 dBu (1.5 mV); (LINE) -8 dBu (0.3 V)
345 482 120
INPUT IMPEDANCE (MIC) 2.4 KΩ; (LINE) 10 KΩ
444 SUPPLY VOLTAGE / POWER CONSUMPTION 220 ÷ 240 V / 110 ÷ 120 V (50 / 60 Hz) / 350483
W
INPUT CONNECTORS 4 x XLR, 1 x RCA (LINE)
UP UNBALANCED,
1123 - 6 1 x RCA (MAIN IN)
AM 2160 - 5
OUTPUT CONNECTORS 2 x RCA (LINE-OUT, PRE-OUT), SCREW TERMINALS FOR CONSTANT VOLTAGE LINES
132
Professional Stereo Amplifier
Channel 1 Channel 2
HC 2000
88 g
10˙000
POWER AMPLIFIER 88
TONE MASTER
220 88
TONE MASTER
UP 1123
AM 1122-N
MIXER AMPLIFIER
88 VOLUME
HC 1600
350
SUPPLY VOLTAGE / POWER CONSUMPTION
350
220 ÷ 240 V / 110 ÷ 120 V (50 / 60 Hz) / 350 W
455
483 INPUT CONNECTORS 483 1 XLR (OR SCREW TERMINALS) 483
46 OUTPUT CONNECTORS SCREW TERMINALS FOR CONSTANT VOLTAGE LINES
POWER AMPLIFIERS
The new 8000 series power amplifiers are designed around an innovative RCF power supply and amplification technology.
The full digital technology used in these new products allows extremely high efficiency both with AC and DC power supply operation, Pro-Quality audio reproduction
and compactness: all the three models are built-in a single 19” Unit.
The switching mode power supplies include an independent DC 48 V section that guarantees extra redundancy to the possible failure of the units. Each channel is
provided with two inputs and dedicated priority circuit to get mix/mute and exclusive priority operation.
The amplifiers are suitable for 70/100 V applications, using a unique RCF technology that allows to eliminate the line output transformer. Several status LEDs on
front panel give a complete feedback on amplifier status, a DIP switch on rear panel allows to disable the frontal volume controls in order to avoid misuses. All
connectors are removable screw terminals.
FLEXA SYSTEM
POWER AMPLIFIER
1 PR 4092 - 2 MX 1822 - 3
266
44
CHIME INPUTS OUTPUTS
4092 A
200
PREAMPLIFIER
88
INPUTS TONE MASTER
UP 1123
AM 1122-N
MIXER AMPLIFIER
TONE VOLUME
88 VOLUME
315 382
88
FLEXA
370
483
ED 1100 - 11 HC 1600 - 12
SPECIFICATIONS FLEXA
OUTPUT POWER 80 W (UP 6081) - 240 W (UP 6241) - 480 W (UP 6481)
FREQUENCY RESPONSE 30 ÷ 18.000 Hz (± 3 dB)
Professional Stereo Amplifier
Channel 1 Channel 2
HC 1600
ED 600
DISTORTION (THD+N) 88 ED 1100
< 0.1% @ 1 kHz; 88
350 350 455
SPEAKER OUTPUTS 100 V
483 483 483
AUXILIARY OUTPUTS 600 Ω, 2.5 V (PRE-OUT); 600 Ω, 0÷2 V (TAPE OUT)
SIGNAL TO NOISE RATIO > 90 dB
3 INPUT SENSITIVITY HC 3200 - 14 (IN 1) -2 dBu (600 mV); (IN 2) -2 ÷ -22 dBu (600÷60 mV);
INPUT IMPEDANCE 18 KΩ
SUPPLY VOLTAGE 220÷240 V / 110÷120 V (50 / 60 Hz) DEPENDING ON THE MODEL
POWER CONSUMPTION 600 W (PS 6320) - 1300 W (PS 6640)
INPUT CONNECTORS
Channel 1
Professional Stereo Amplifier
HC 3200
Channel 2
SCREW TERMINALS 88
132
Professional Stereo Amplifier
220
Channel 1 Channel 2
HC 2000
CONFIGURATIONS The configurations shown above are just a few out of many possible combinations.
We suggest to choose the amplifier modules first, then the power supply modules
EXAMPLES according to the effective power needed by loudspeakers, in order to take all the
advantages of Flexa System.
1 x 480 W - 1 - - 1 1 1 1 160 W 4 3
1 x 240 W 1 - 1 - 1 1 1 80 W 6 5
1 x 160 W 1 - - 11 - 1 1 1 160 W 6 5
2 x 240 W - 1 - 2 - 1 1 1 160 W 3 2
2 x 160 W 1 - - 22 - 1 1 1 - 4 3
4 x 80 W 1 - 4 - - 1 1 1 - 4 3
6 x 80 W - 1 6 - - 1 1 1 160 W 1 -
49
FLEXA MODULAR AMPLIFICATION SYSTEM
FLEXA
POWER AMPLIFIERS
UP 6081 80 W POWER AMPLIFIER p/n 121.35.022
ÃÃ H-Class "Three Step" design, high quality audio and high efficiency. An automatic "cut-out"
ÃÃ System insulates any faulty unit without affecting other devices on the same Flexa frame.
ÃÃ 2 balanced/unbalanced inputs on terminal strip, two input circuits with priority (for alarm circuits)
ÃÃ Volume control and mono-stereo connection on input 2, LED indicators for volume/peak and status (OVERLOAD, OVERHEAT, FAULT)
ÃÃ Volume and equalisation controls on the front panel (the volume knob is removable; the tone controls have a cut-off switch)
ÃÃ Removable Euro-block connectors
SPECIFICATIONS PB 6024
TYPE DC ADAPTER
DIMENSIONS 1 SLOT
WEIGHT 0.7 Kg
MAXIMUM OPERATING TEMPERATURE 55°
50
FLEXA MODULAR AMPLIFICATION SYSTEM
FLEXA ÃÃ
ÃÃ
Small, lightweight quartz-controlled power supplies
Synchronisation to prevent interference with other power supplies installed close to each other
POWER ÃÃ
ÃÃ
Total protection with auto cut-out
LED indicators for OVERLOAD and OVERHEAT
Main control board for power amplifier and Board for amplifier, line impedance and earth Card for automatic digital control of the ambient
speaker line with microprocessor interface for dispersions diagnosis with a direct priority input signal/noise ratio. Connection for up to four
SB 3320 and LB 3340 and power amplifier on power amplifier controlled noise detection omnidirectional microphones or
change-over circuit built-in. loudspeakers. Preselection for Nighttime sound
level attenuation
PS 3400 OT 3500
POWER SUPPLY FOR TRANSFORMER FOR
BACK-AMPLIFIER BOARDS DISTRIBUTED SYSTEMS
RB 3300 p/n 171.20.056
p/n 171.30.006
Power supply unit in 1RU 19” for back- Mumental insulation tranformer with
amplifier boards RB 3300. Electronic protection removeable screw terminals. Can work with
circuit for voltage, current and temperature. 0dB signals.
51
PREAMPLIFIERS
9 INPUTS, 2 OUTPUTS
PREAMPLIFIER
ÃÃ Preamplifier/mixer 9 inputs - 2 outputs ÃÃ 4 of the LINE inputs are available on RCA stereo connectors
ÃÃ 9 balanced XLR inputs ÃÃ Built-in three-tone chime generator with contact on removable Euro-block
connector
ÃÃ 8 inputs have MIC/LINE sensitivity
ÃÃ 2 balanced XLR outputs
ÃÃ Switchable PHANTOM 24 V power supply and HIGH-PASS filters on the
microphone inputs ÃÃ Tone controls (Treble and Bass) on each output
ÃÃ Each input has an OUTPUT SELECTOR ÃÃ LED level measurement on the two outputs
ÃÃ SIGNAL presence indicator on each input ÃÃ RECORD OUTPUT on RCA connector (pre-master)
ÃÃ 2 levels of PRIORITY: ÃÃ 19'' rack mount 1U
· input 1 by VOX or by contact on removable connector
· inputs 2 and 3 by VOX
REAR VIEW
2˙000 g
ES 3160 - 1 PR 4092 - 2 mm MX 1822 - 3
266
44
CHIME INPUTS OUTPUTS
4092 A
200
PREAMPLIFIER
127
345 482
444
AM 1122 - 4 AM 2160 - 5 UP 1123 - 6
SPECIFICATIONS PR 4092
AUDIO OUTPUT LEVEL MASTER A,B: +4 dBu (1.23 V); REC: 0 dBu (775 mV)
FREQUENCY RESPONSE 88
20 ÷ 20.000 Hz
DISTORTION (THD+N) < 0.5% (MIC); < 0.3% (LINE)
220 88
INPUTS TONE MASTER
88
AM 1122-N
MIXER AMPLIFIER
88
2 x XLR, 2 x RCA VOLUME
315 382
52 88
433 433
MIXERS
ÃÃ Mixer 14+2 universal input and 2+2 output ÃÃ Semi-parametric 3-band equaliser on each MIC/LINE input
ÃÃ 14 balanced MIC/LINE XLR inputs ÃÃ OUTPUTS: Master on XLR connectors, AUX on 6.3 mm jacks
ÃÃ 2 stereo inputs at line level for music sources (can also be configured as MIC) ÃÃ INSERT connections available on each input
ÃÃ 48 V PHANTOM power supply ÃÃ Recording OUTPUT / INPUT on RCA connectors
ÃÃ Each input can be directed onto two Master outputs and two AUX outputs ÃÃ Headphones output with volume control
ÃÃ LED indicator for SIGNAL presence on each input ÃÃ Dimensions: 6U 19'' rack (all the connections are on the rear panel)
ÃÃ VU-meter assignable to each input or to the main output
PR 4092 - 2 MX 1822 - 3
REAR VIEW
6˙950 g
mm
266
44
CHIME INPUTS OUTPUTS
4092 A
200
PREAMPLIFIER
SPECIFICATIONS 88 MX 1822
AUDIO OUTPUT LEVEL MASTER 1.2:88
+4 ÷ +28 dBu ; AUX 1.2: +22 dBu
TONE MASTER
220
TONE MASTER
UP 1123
AM 1122-N
MIXER AMPLIFIER
260 RESPONSE
FREQUENCY 444 280
10 Hz ÷ 45 kHz (MIC-AUX); 10 Hz ÷ 80 kHz (LINE-AUX); 10 Hz ÷ 65 kHz (AUX-L&R)
DISTORTION (THD+N) < 0.006% (MIC); < 0.006% (LINE); < 0.0025%
420 (AUX)
20
TONE CONTROLS BASS: 60 Hz ± 15 dB; MEDIUM: 250 Hz ± 15 dB; TREBLE: 12 kHz ± 15 dB
SIGNAL TO NOISE RATIO UP 4242 - 8 FLEXA
> 80 dB (1 CH.); > 85- dB
9 (8 CH.)
INPUT SENSITIVITY MIC: 12 dB ÷ 60 dB; LINE: -8 dB ÷ 40 dB
INPUT IMPEDANCE MIC: 2 kΩ BALANCED; LINE: 20 kΩ BALANCED; AUX: 10 kΩ BALANCED
OUTPUT IMPEDANCE L&R: 75 Ω; AUX: 100 Ω
SUPPLY VOLTAGE UP 4000-SERIES P.A. POWER UNIT
220÷240 V / 110÷12v0 V (50 / 60 Hz)
TONE VOLUME
25 W
INPUT315
CONNECTORS
382 XLR, JACK 6.3 mm (LINE)
88
FLEXA
370
483
53
ED 1100 - 11 HC 1600 - 12
FLUSH MOUNTED
AND WALL SPEAKERS
The best solutions for wall or flush
installations in false ceiling or panels.
MODEL PL 40 PL 50 PL 60 PL 6X PL 8X
TYPE Ceiling speaker Ceiling speaker Ceiling speaker Ceiling speaker Ceiling speaker
iNSTALLATION Flush mounted Flush mounted Flush mounted Flush mounted Flush mounted
cOLOUR White White White White White
SPEAKER 3.5” 6” 6” dual-cone 6” + 1” 8” + 1”
POWER NOM. / PROGRAM 8 W RMS / 16 W 3 W RMS– 6 W 6 W RMS / 12 W 12 W RMS / 24 W 20 W RMS / 40 W
INPUT 100 V, 70 V 100 V 100 V, 70 V 100 V, 70 V 100 V, 70 V
FREQUENCY RESPONSE 90 ÷ 20.000 Hz 100 Hz ÷ 20 kHz 110 ÷ 20.000 Hz 70 ÷ 20.000 Hz 60 ÷ 20.000 Hz
MAX. SOUND PRESSURE 100 dB 98 dB 102 dB 106 dB 109 dB
ANGLE OF COVERAGE 120° 150° 150° 100° 80°
PROTECTION IP 44 - - IP 44 IP 44
54
LOUDSPEAKERS
MODEL DM 41 DM 61 DU50 EN DU 100X WS 620-XT
TYPE Compact two-way Compact two-way Universal Universal Universal two-way
INSTALLATION Wall Wall Wall or flush mounted Wall or flush mounted Flush-mounted
COLOUR White Ivory White Ivory White White White
SPEAKER 3.5” + 1” 6” + 1” 4.5” 4”+ 1" 6” + 1”
POWER NOM. / PROGRAM 15 W RMS / 30 W 25 W RMS / 50 W 6 W RMS / 12 W 10 W RMS / 20 W 12 W RMS / 24 W
INPUT 100 V, 70 V 100 V, 70 V 100 V, 70 V 100 V, 70 V, 25 V 100 V, 70 V, 4 Ω
FREQUENCY RESPONSE 100 ÷ 20.000 Hz 70 ÷ 20.000 Hz 200 ÷ 12.000 Hz 100 ÷ 18.000 Hz 70 ÷ 20.000 Hz
MAX. SOUND PRESSURE 102 dB 106 dB 102 dB 103 dB 105 dB
ANGLE OF COVERAGE 180° (Horiz) 170° (Ver) 120° (Horiz) 140° (Ver) 150° 100° (Horiz) 140° (Ver) 120°
PROTECTION IP 55 IP 55 EN 54-24 IP 55
55
122 130 180 204 244 266
CEILING
110
SPEAKERS 75 100
PL 6X - 25 PL 8X - 26 PL 81/A - 27
7 8 3
150 127 73
PL 40- 31
HS 1026 - 22 SPECIFICATIONS
DMPL
4160 - 23
- 32 HS 1026 W- 33 -24
PL80/A
DM 61
POWER 6 - 3 W (100 V)
7 6150 3 200
550 g CONSTANT VOLTAGE 100 V, 70 V
7 8 3
PL 40 p/n 131.33.045
CEILING SPEAKER
ÃÃ Recommended for speech and background-music reproduction
ÃÃ Low impedance (8Ω) or 100V
ÃÃ 3.5” full range speaker
ÃÃ Three hooks mounting system (no screws or other attachment elements)
ÃÃ Built-in multi-tapped transformer for constant voltage connection
ÃÃ Body in self-extinguishing (UL 94V-0) plastic and front metal grille RAL 9003 White
ÃÃ IP 44 protection
SPECIFICATIONS PL 40
PL 40 - 22 PL 60 - 23 PL80/A -24
POWER 8 - 6 - 4 - 2 W (100 V)
1˙000 g
7 6 VOLTAGE
CONSTANT 100 V, 70 V 3
mm FREQUENCY RESPONSE 90 ÷ 20.000 Hz (± 3 dB)
122 130 180 SENSITIVITY (1 m / 1 W) 204 88 dB244 266
MAXIMUM SOUND PRESSURE 100 dB (1 m / POWER MAX)
60 ANGLE OF
75 COVERAGE 120° 100
PL 6X - 25 PL 8X - 26 PL 81/A - 27
56
7 8 3
CEILING SPEAKERS
LOUDSPEAKERS
60 65
PL 6X - 25 PL 8X - 26 PL 81/A -
7 8
ÃÃ Suitable
182 for paging and background204music applications
224 247 244
ÃÃ 6” wide band loudspeaker
ÃÃ Sound pressure level at music power: 91 dB @ 1W/1m
73 88
ÃÃ Built-in multi-tap line transformer, 100V and 70V constant voltage connection
PL 60FD - 28 PL 70BS - 29 DS 313/W
ÃÃ Body in self-extinguishing plastic, white colour
ÃÃ Spring-type mounting
7 system 16
SPECIFICATIONS 200
PL 50 230 200 230 156
POWER 6 – 3W
CONSTANT VOLTAGE 100 V 150 127
FREQUENCY RESPONSE 100 Hz
HS ÷ 20 kHz
1026 - 31(± 3 dB) DM 41 - 32 DM 61 - 3
SENSITIVITY (1 m / 1 W) 90 dB
150
MAXIMUM SOUND PRESSURE 98 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 150° 104
197
91 115 130
PL 60 p/n 131.10.214
60 75
PL 6X - 25 PL 8X - 26 PL 81/A - 2
7 16
SPECIFICATIONS PL 60
200 230 200 230 156
POWER 6 - 3 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 110 ÷ 20.000 Hz 150
(± 3 dB) 127
SENSITIVITY (1 m / 1 W) 91 HS
dB 1026 - 31 DM 41 - 32 DM 61 - 33
MAXIMUM SOUND PRESSURE 102 dB (1 m / POWER MAX) 150
ANGLE OF COVERAGE 150°
104
197 57
91
CEILING SPEAKERS
PL 40 - 22 PL 60 - 23 PL80/A -24
7 6 3
PL 6X - 25 Ã Ã Sound
PL 8X - 26 pressure level at music power: 105 dB/1 m
PL 81/A - 27
ÃÃ Low impedance (8Ω) or 100V
7 8 3 connection
ÃÃ Built-in multi-tapped transformer for 100/70V constant voltage
ÃÃ Metal back cover, RAL 3020 red
182 204 Ã224 247 fuse, fire resistant
à Ceramic termination blocks, thermal 244 cable 266
ÃÃ Front metal grille RAL 9010 White
73 88 112
PL 60FD - 28 SPECIFICATIONS
PL 70BS - 29 PL 60FD
DS 313/WT - 30
POWER 6 - 3 - 1.5 W (100 V)
2˙800 g 7 16 12
CONSTANT VOLTAGE 100 V, 70 V
mm FREQUENCY RESPONSE 150 ÷ 15.000 Hz (± 3 dB)
200 230 200 230 156 189
SENSITIVITY (1 m / 1 W) 94 dB
MAXIMUM SOUND PRESSURE 105 dB (1 m / POWER MAX)
PL 60 - 23 150 PL80/A -24 OF127 73
ANGLE COVERAGE 150°
HS 1026 - 31 DM 41 - 32 DM 61 - 33
6 3
130
PL 70EN 180 204
p/n 131.10.029
244
150
266
200
75
ÃÃ Speaker100
for transmitting voice alarm messages with high intelligibility and background music
ÃÃ 6” diameter dual cone wide band loudspeaker
PL 8X - 26 91 PL 81/A - 27 115 130 177 216
ÃÃ Low impedance (8Ω) or 100V
8 ÃÃ Steel protection
3 Fire Dome, terminal strip in ceramic material for connecting flameproof input and
output cables, thermal fuse, suitable internal wiring
ÃÃ Conforms to EN 54-24 regulations
204 224 247 244 266
ÃÃ Structure, front grille, and protection cap in steel, RAL 9003 White
88 112
SPECIFICATIONS PL 70EN
PL 70BS - 29 DS 313/WT - 30
POWER 6 - 3 - 1.5 W (100 V)
2˙000 g 16 CONSTANT12VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 120 ÷ 14.000 Hz (± 3 dB)
mm
230 200 230 SENSITIVITY (1 m / 1 W)
156 189 95 dB
MAXIMUM SOUND PRESSURE 109 dB (1 m / POWER MAX)
104 COAXIAL CEILING SPEAKER ÃÃ Two way speaker system with dome tweeter recommended for speech and background-music
197 reproduction 289
ÃÃ 6” woofer with coaxial tweeter
PL 40 - 22 PL 60 - 23 ÃÃ Low impedance (8Ω) or 100V PL80/A -24
115 130 177 216
ÃÃ Built-in multi-tapped transformer for 100/70V constant voltage connection
7 6 3
ÃÃ Three hooks mounting system (no screws or other attachment elements)
ÃÃ Body in self-extinguishing (UL 94V-0) plastic and front metal grille RAL 9003 White
122 130 180 204 244 266
ÃÃ IP 44 protection
60 75 100
SPECIFICATIONS PL 6X
PL 6X - 25 PL 8X - 26 PL 81/A - 27
POWER 12 - 6 - 3 W (100 V)
1˙000 g
7 CONSTANT
8 VOLTAGE 100 V, 70 V 3
mm FREQUENCY RESPONSE 70 ÷ 20.000 Hz (± 3 dB)
182 204 224 SENSITIVITY (1 m / 1 W) 247 92 dB
244 266
MAXIMUM SOUND PRESSURE 106 dB (1 m / POWER MAX)
WS 620XT
DA 1/N - 7
220
p/n 131.33.044
DP 3011- 8
237
WS 620 XT - 9
184
LOUDSPEAKERS
15 60 239 169 115
14 ÃÃ 18
Weather resistant
164 220splashproof speaker
ÃÃ Two way speaker system with coaxial tweeter, recommended for hi level speech and
108 110 155 background-music reproduction185
ÃÃ 6” woofer with coaxial tweeter
ÃÃ Body and grille in plastic RAL 9016 White
27 43 170 20
ÃÃ IP5555 protection260
SPECIFICATIONS WS 620XT
POWER 12 - 6 - 3 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 70 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 91 dB
MAXIMUM SOUND PRESSURE PL105
40 -dB
22(1 m / POWER MAX) PL 60 - 23 PL80/A -24
ANGLE OF COVERAGE 120° 7 6
60 75
PL 6X - 25 PL 8X - 26 PL 81/A - 27
PL 8X p/n 131.33.043
7 8
7 16
200
ÃÃ Two way speaker system with 230dome tweeter recommended for hi level speech and
200 230 156
background-music reproduction
ÃÃ 8” woofer with coaxial tweeter
ÃÃ Low impedance
150 (8Ω) or 100V 127
ÃÃ Built-in
HS 1026 - 31 multi-tapped transformer for 100/70VDM constant
41 - 32 voltage connection DM 61 - 33
ÃÃ Body in self-extinguishing plastic (UL 94V-0) and front metal grille RAL 9003 White
ÃÃ IP 44 protection 150
104
197
59
CEILING SPEAKERS
Du 100X -4 CSN-N -
ÃÃ Pendent speaker
ÃÃ For paging and background music 87
ÃÃ 8” diameter dual cone wide band speaker
ÃÃ Plastic body - White RAL 9010
ÃÃ Built-in transformer for 100V constant voltage connection 190
ÃÃ 5-metre suspension and connection cable included
220
SPECIFICATIONS BS 8
DA 1/N - 7 DP 3011
POWER 20-10-5 W (100 V)
CONSTANT VOLTAGE 100 V 5
FREQUENCY RESPONSE 160 ÷ 12.500 Hz (± 3 dB) 220
SENSITIVITY (1 m / 1 W) 93 dB
MAXIMUM SOUND PRESSURE 106 dB (1 m / POWER MAX) 155 166
ANGLE OF COVERAGE 360° (HORIZ.); 140° (VERT.)
15 60 239
ELISA 50 - 10 ELISA 1
BS 2620 BS 8 - 1 p/n 131.10.006 BS 2620 - 2
14
DU 50
HIGH PERFORMANCE PENDENT BALL SPEAKER 164
3˙000 g
108 110 155
240 mm 250 240 260
27 43 170
220 237
DA 1/N - 7 DP 3011- 8 WS 62
SPECIFICATIONS BS 2620
POWER 20-15-10-5-2.5 W (100 V) 81 14
5
CONSTANT VOLTAGE 100 V 220
FREQUENCY RESPONSE 50 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 155 93 dB 166 284 13
MAXIMUM SOUND PRESSURE 106 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 360° (HORIZ.); 150° (VERT.)
15 60 239 169
60
ELISA 50 - 10 ELISA 100 - 11
BS 8 - 1 BS 2620 - 2
UNIVERSAL SPEAKERS
240 250 240
1˙100 g
mm 190
LOUDSPEAKERS
220
DA 1/N - 7 DP 3011- 8
ÃÃ Ideal for paging and background music, wall or ceiling installation
ÃÃ Dual-cone extended range loudspeaker, 4” diameter5
220
ÃÃ Plastic body with shock-proof metal grid
ÃÃ Built-in multi-tapped transformer for 100/70V constant voltage connection
155 166
ÃÃ Body in ABS and metal grille RAL 9003 White
15 60 239
164
CSN-N - 5 CSB-1T - 6
ÃÃ Speaker designed for transmitting alarm messages with high intelligibility, and background
150 music 240 188
ÃÃ Wide-band dual cone loudspeaker, diameter 5”
ÃÃ Extra-thick steel housing, terminal strip for connections made of ceramic material for flameproof
190 input and output
184 cables, thermal fuse, suitable internal wiring 234
ÃÃ In compliance with norm EN 54-24
ÃÃ Colour: RAL 9010 White
ELISA 100 - 11
UNIVERSAL SPEAKERS
DU 31 p/n 130.00.204
FLUSH MOUNT WALL SPEAKER ÃÃ For paging and background music for several type of installation
ÃÃ 2 way wall speaker with flexible design with wide band 3,5" woofer and 1" tweeter
ÃÃ Includes a transformer inside for the connection to (100 - 70 - 25 V) constant voltage lines
ÃÃ Power selector 8 W, 4 W, 2W at 100 V and a 25 V (8W) socket makes it possible to connect
multiple speakers in parallel to a constant impedance line
ÃÃ Universal mounting in wall on the standard European flush mounting box (like Gewiss GW 48005
dimension 160(L) x 130(H) x 70(P) or B-Ticino 16205 dimension 170(L) x 145(H) x 70(P))
ÃÃ Body in plastic, RAL 9002 White Ivory
SPECIFICATIONS DU 31
600 g 151 56 POWER 8 - 4 -2 W (100 V) - 8 W (25 V)
mm CONSTANT VOLTAGE 100 V, 70 V, 25 V
FREQUENCY RESPONSE 100 - 17.000 Hz (± 3 dB)
175
SENSITIVITY (1 m / 1 W) 82 dB
MAXIMUM SOUND PRESSURE 91 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 160°
151 56
DU 31AT 175
p/n 130.00.220
ÃÃ For paging and background music for several type of installation
FLUSH MOUNT WALL SPEAKER ÃÃ 2 way wall speaker with flexible design with wide band 3,5" woofer and 1" tweeter
WITH POWER SELECTOR ÃÃ Wattage taps (8 W, 4 W, 2W, 1W, 0,5W at 100 V) is selectable by means of a Rotary switch,
accessible from the front panel
ÃÃ Includes a transformer inside for the connection to (100 - 70 - 25 V) constant voltage lines and a
25 V socket makes it possible to connect multiple speakers in parallel to a constant impedance line
151 56 ÃÃ Universal mounting in wall on the standard European flush mounting box (like Gewiss GW 48005
dimension 160(L) x 130(H) x 70(P) or B-Ticino 16205 dimension 170(L) x 145(H) x 70(P))
ÃÃ Body in plastic, RAL 9002 White Ivory
175
600 g
151 56 SPECIFICATIONS DU 31AT
mm POWER 8 - 4 -2 - 1- 0,5 W (100 V) - 8 W (25 V)
CONSTANT VOLTAGE 100 V, 70 V, 25 V
175
FREQUENCY RESPONSE 100 - 17.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 82 dB
MAXIMUM SOUND PRESSURE 91 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 160°
DU31 and A1331 wall DU31 and A1331 wall DU31 and A1331 flag 2 x DU31 and
DU 31AT Table mounting mounting support mounting support mount support 2 x A1331 flag mount
support with tilt 15° with tilt 0° with tilt 15° unidirectional support bi-directional
62
220
DA 1/N - 7 DP 3011- 8
UNIVERSAL SPEAKERS 5
220
155 166
900 g 14 18
164
mm
108 110 155
LOUDSPEAKERS
27 43 170 20 55
SPECIFICATIONS E.LI.S.A. 50
POWER 6-3-1 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V, 25 V, 4 Ω
FREQUENCY RESPONSE 120 ÷ 16.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 88 dB
MAXIMUM SOUND PRESSURE 99 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 160°
63
73 88 112
PL 60FD - 28 PL 70BS - 29 DS 313/WT - 30
UNIVERSAL SPEAKERS 7 16 12
DM 41 - 32
127
DM 61 - 33
73
91 115 130 1
110 75 100
PL 6X - 25 PL 8X - 26 PL 81/A - 27
SPECIFICATIONS DM 41-B16
POWER 15W7 8 3
SPEAKER IMPEDANCE 16Ω
FREQUENCY RESPONSE 182 100 ÷ 20.000 Hz (± 3 dB) 204 224 247 244
SENSITIVITY (1 m / 1 W) 87 dB
MAXIMUM SOUND PRESSURE 102 73
dB (1 m / POWER MAX) 88 112
ANGLE OF COVERAGE PL 60FD - 28180° (HORIZ.); 170° (VERT.) PL 70BS - 29 DS 313/WT - 30
7 16 12
DM 41
COMPACT TWO-WAY SPEAKER p/n 150
130.00.049 127 73
HS 1026 - 31 DM 41 - 32 DM 61 - 33
1˙800 g
150 200
mm
92 104
197
SPECIFICATIONS DM 41
POWER 15 - 10 - 5 - 2.5 W (100 V) SELEZ.
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 100 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 87 dB
MAXIMUM SOUND PRESSURE 102 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 180° (HORIZ.); 170° (VERT.)
64
73 88 112
PL 60FD - 28 PL 70BS - 29 DS 313/WT - 30
UNIVERSAL
7
SPEAKERS 16 12
DM 61
HS 1026 - 31
150
DM 41 - 32
p/n
127130.00.050
DM 61 - 33
73
92 104 mm
197 289
LOUDSPEAKERS
91 115 130 177 216
SPECIFICATIONS DM 61
POWER 25 - 15 - 10 - 5 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 100 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 89 dB
MAXIMUM SOUND PRESSURE 106 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 120° (HORIZ.); 140° (VERT.)
1˙340 g
mm
65
SOUND PROJECTORS,
MONITORS AND
COLUMN SPEAKERS
Maximum speech intelligibility
for every public ambience and for any
kind of application.
INSTALLATION Wall o Flush Mounted Wall o Flush Mounted Wall o Flush Mounted Wall o Flush Mounted Wall o Flush Mounted
COLOUR Grey Grey White Grey Grey
SPEAKER 5” 2 x 5” 5” + 1 “ 5” 2 x 5”
POWER NOM./PROGRAM 10 W RMS / 20 W 12 W RMS / 24 W 4 W RMS / 8 W 20 W RMS / 40 W 20 W RMS / 40 W
INPUT 100 V 100 V 100 V, 4 Ω 100 V, 70 V, 100 V, 70 V,
FREQUENCY RESPONSE 180 ÷ 16.000 Hz 180 ÷ 16.000 Hz 150 ÷ 18.000 Hz 150 ÷ 20.000 Hz 130 ÷ 20.000 Hz
MAX. SOUND PRESSURE 101 dB 102 dB 102 dB 104 dB 102 dB
ANGLE OF COVERAGE 130° 130° *
110° 160° 130°*
PROTECTION IP 55 IP 55 - IP 66, EN 54-24 IP 55, EN 54-24
66
LOUDSPEAKERS
MODEL MR 33T MR 44T MR 55 MQ 100L MQ 90S
TYPE Compact two-way Compact two-way Compact two-way Column speaker Three-way Subwoofer
INSTALLATION Wall Wall Wall Wall Universal
COLOUR White/Black White/Black White/Black White/black White/Black
SPEAKER 4.75” + 0.5” 5” + 0.5” 5” + 0.75” 2 x 3.5” + 2 x 3.5” + 0.75” 8”
POWER NOM./PROGRAM 40 W IEC 60 W IEC 175 W IEC 80 W RMS / 160 W 60 W RMS / 120 W
INPUT 100 V, 70 V, 50 V, 25 V 100 V, 70 V, 50 V, 25 V 4Ω 100 V, 70 V 100 V, 70 V
FREQUENCY RESPONSE 160 ÷ 20.000 Hz 150 ÷ 20.000 Hz 150 ÷ 20.000 Hz 130 ÷ 20.000 Hz 70 ÷ 220 Hz
MAX. SOUND PRESSURE 105 dB 108 dB 112 dB 120 dB 107 dB
ANGLE OF COVERAGE 110° (Horiz) 100° (Ver) 110° (Horiz) 100° (Ver) 110° (Horiz) 100° (Ver) 180° (Horiz) 60° (Ver) -
PROTECTION - - - -
67
SOUND PROJECTORS
DP 4 p/n 130.00.106
DP 4 - 12 DP 1 TG - 13
SPECIFICATIONS DP 4 DP 1/STK - 14
215 POWER 10 - 5 - 2.5 W (100 V)
1˙300 g
CONSTANT VOLTAGE 100 V
mm FREQUENCY RESPONSE 200 180 ÷ 16.000 Hz (± 3 dB) 200
146 137 160 160
SENSITIVITY (1 m / 1 W) 91 dB
MAXIMUM SOUND PRESSURE 101 dB (1 m / POWER MAX)
215 245 245
ANGLE OF COVERAGE 130°
DP 2X -15 DB 1420 - 16 BD 2412 - 17
BD 42 136
176
p/n 130.00.247
155 146 175 146
INDOOR / OUTDOOR BIDIRECTIONAL SOUND PROJECTOR
ÃÃ It’s ideal for train stations, underground stations, car parks, factories, warehouses,
186 and PA
205 200
systems in general
CS 2012 - 18 CS 2020- 19 CS 6520 - characterized
20
ÃÃ Bidirectional sound projector with double loudspeaker, by high acoustic
73 90 performance, excellent
73 design and
90 compact dimensions 184 114
ÃÃ IP55 protection, suitable for outdoor use
ÃÃ 2 x 5” (130 mm) diameter extended range twin-cone loudspeaker
65 402 65 615 96 580
ÃÃ Built-in multi-tapped transformer for 100 V constant voltage connection
ÃÃ Equipped with aluminium "U" bracket. Body in ABS grey RAL 7035 with metal grill
SPECIFICATIONS BD 42
CS 6940 - 21
132 POWER 12 - 6 - 3 W (100 V)
1˙500 g 184 114 CONSTANT VOLTAGE 100 V
mm FREQUENCY RESPONSE 180 ÷ 16.000 Hz (± 3 dB)
150 140
96 956 SENSITIVITY (1 m / 1 W) 91 dB
200 MAXIMUM SOUND PRESSURE 102 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 130° (per single loudspeaker)
ÃÃ Equipped with hinged support that makes it possible to orient the speaker in any direction
215 ÃÃ DP 2X/1: body in ABS245
RAL 9003 White, metal grille White 245
DP 2X -15 DB 1420 - 16 BD 2412 - 17
SPECIFICATIONS DP 2X/1
POWER 200 4-2-1 (100 V) 150 100
1˙100 g
CONSTANT VOLTAGE 100 V
mm 176 155 FREQUENCY RESPONSE 146 150 ÷175
18.000 Hz (± 3 dB) 146
136
SENSITIVITY (1 m / 1 W) 94 dB
68 73 90 73 90 184 114
DP 4 - 12 DP 1 TG - 13 DP 1/STK - 14
215
SOUND PROJECTORS
146 137 200
160 160
215 245
200
BD 2412 - 17
LOUDSPEAKERS
CS 2012 - 18 CS 2020- 19 CS 6520 - 20
73 90 73 90
96 956
SPECIFICATIONS DP 1420En
POWER 20-10-5 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 150 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 91 dB
MAXIMUM SOUND PRESSURE 104 dB (1 m / POWER MAX) 2
ANGLE OFDP 4 - 12
COVERAGE DP 1160°
TG - 13 DP 1/STK - 14
215
BD 2412 EN
DP 2X -15
215
DB 1420 - 16
p/n 131.33.074
245
BD 2412 - 17
245
73 90 73 90 184 114
96 956
SPECIFICATIONS BD 2412 EN
POWER 20-5-10 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 130 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 89 dB
MAXIMUM SOUND PRESSURE 102 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 130° (per SINGLE LOUDSPEAKER)
69
COLUMN SPEAKERS 176 155
136
205
1˙700 g
65 430
CS 6940 - 21
65 430 65 670
CS 6940 - 21
ÃÃ Ideal for speech reproduction, shape designed to enable corner installation
184 114
ÃÃ Eight 50 mm (2”) diameter extended range speakers and two tweeter 25
mm (1”)
ÃÃ Body in extruded aluminium bake-painted RAL 9016 White and front metal
96 956 grille RAL 9016 White, includes accessory for wall mounting
ÃÃ Built-in multi-tapped transformer (30 - 20 - 10 W) for 100 V constant
voltage connection
ÃÃ 16-ohm input that can be selected on the terminal block
ÃÃ Audio connection on screw terminal block
SPECIFICATIONS CS 3082
POWER 30 W - 20 W - 10 W
CONSTANT VOLTAGE 100 V
FREQUENCY RESPONSE 180 - 20.000 Hz (? 3 dB)
SENSITIVITY (1 m / 1 W) 90 dB
MAXIMUM SOUND PRESSURE 111 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 180° (HORIZ.); 30° (VERT.)
70
DB 1420 - 16 BD 2412 - 17
COLUMN SPEAKERS
176 155 146 175 146
4˙200 g 186
CS 6520CS 2020- 19
205 200
p/n 131.50.005 mm
CS 6520 - 20
TWO-WAY COLUMN SPEAKER DP 4 - 12 DP 1 TG - 13
73 90 73 90 184 114
215
65 402 65 615 96 580
LOUDSPEAKERS
146 137 160
215
ÃÃ Ideal for speech reproduction with high intelligibility in acoustically difficult 200
environments, both indoors and outdoors, also suitable for music
96 956 ÃÃ Four 3” mid-woofer speakers and one central 20mm tweeter
ÃÃ Weather-resistant construction IP 66 for use also outdoors, 176sturdy hinged
155
136 in resin, stainless steel fasteners
support
ÃÃ Body in aluminium and front grille in steel bake-painted RAL 9003 White
ÃÃ Articulated support for wall mounting included
205
CS 2012 - 18 CS 2020- 19
SPECIFICATIONS CS 6520
POWER 20 - 10 - 5 - 2.5 W (100 V) 73 90
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 250 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 92 dB 65 402
MAXIMUM SOUND PRESSURE 105 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 180° (HORIZ.); 60° (VERT.)
7˙000 g
SPECIFICATIONS CS 6940
POWER 40 - 20 - 10 - 5 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 160 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 94 dB
MAXIMUM SOUND PRESSURE 110 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 180° (HORIZ.); 40° (VERT.)
71
MONITOR SERIES
136 154
MR 88 -37 MSW 8 -
MR 33 - 34 MQ 44
MR 60 -- 35
43 MQ 50C
MR
MR 44T MR 44T Black p/n 00.07.142
122
MR 44WT MR 44WT White p/n 00.07.354
10
MONITOR SERIES
MR 55 MR 44 - 35
MR 55 Black p/n 00.07.143
MR 55 - 36
MR 55W MR 55 White p/n 00.07.355
TWO-WAY HIGH DEFINITION
MONITOR SPEAKERS 3˙900 g
216 270 270
mm
LOUDSPEAKERS
36 154 172 187 172 187
MSW 8 - 38 MQ 90 - 39
MQ 50C - 44 MQ 50I - 45
122 10 27
163
MA 3B - MA 3W MA 3B Black
MA 3W White
p/n 00.08.056
p/n 00.08.057
WALL198
MOUNT BRACKET 156 Bracket for mounting one MR 33T speaker on 88 195
the wall
MA 5B - MA 5W MA 5B Black
MA 5W White
p/n 00.08.058
p/n 00.08.059
WALL MOUNT BRAKET Bracket for mounting one Monitor 44T
or 55 series speaker on the wall
73
216
MR 88 -37 MSW 8 - 38
1˙100 g 430
104
MQ 60 - 43 MQ 50C - 44
122 10
297 245
3˙000 g
MQ 80P 260
MQ 80P-W White
290
p/n 130.00.096 mm 508 290 400
104 223
MQ 60 - 43 MQ 50C - 44 MQ 50I - 45
SPECIFICATIONS MQ 80P
POWER 30 - 20 - 10 - 5 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 100 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 94 dB
MAXIMUM SOUND PRESSURE 115 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 90° (HORIZ.); 60° (VERT.)
74
MONITOR
430 Q SERIES 800 300
MQ 50
MQ 80P- 41 MQ 50-W White MQ 50 - 42
p/n 130.00.056 MRmm33 - 34 MR 44 - 35
319 175
TWO-WAY MONITOR MQ 50-B Black
p/n 130.00.070
104 223 245
216
LOUDSPEAKERS
MQ 50C - 44 MQ 50I - 45136 154 172 187
ÃÃ Two way Bass reflex speaker for music reproduction
10 MR 88 -37 woofer 27
ÃÃ Speaker: 5” - tweeter 0.75” dome MSW 8 - 38
122 163
ÃÃ Impedance: [Bypass] 16 Ω
ÃÃ Crossover frequencies: 4500 Hz, 12/12 dB/oct
297 245 266 228 268
ÃÃ Protection: Dynamic on woofer and tweeter
ÃÃ Cabinet: Hi-density polystyrene HB430
grade
ÃÃ Connectors: Euroblock, removable for easy installation
198 156 88 195
MQ 60 - 43 MQ 50C - 44
MQ 60H MQ 60H-W White
p/n 130.00.060
3˙000 g
mm 122 10
WIDE DISPERSION CONSTANT MQ 60H-B Black
p/n 130.00.072
DIRECTIVITY MONITOR 297 245
198 156
ÃÃ Two way Bass reflex speaker for music reproduction
ÃÃ Speaker: woofer 5” - tweeter 2 x 1” dome
ÃÃ Impedance: [Bypass] 16 Ω
ÃÃ Line transformer [100V]: 30W - 20W - 10W - 5W - [70.7V]: 15W - 10W -
5W - 2.5W
ÃÃ Crossover frequencies: 2600 Hz. Crossover: 12/12 dB/oct
ÃÃ Protection: Dynamic on woofer and tweeter
ÃÃ Cabinet: Hi-density polystyrene HB grade
ÃÃ Connectors: Euroblock, removable for easy installation
SPECIFICATIONS MQ 60H
POWER 30 - 20 - 10 - 5 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 100 ÷ 19.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 88 dB
MAXIMUM SOUND PRESSURE 109 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 180° (HORIZ.); 120° (VERT.)
MQ 60H Link W
support 2 MQ 60H speakers to form an Omni directional high quality
speaker array (360°) dispersion over a horizontal surface which is controlled
White p/n 133.60.080 over a vertical surface.
104 223
2˙150 g
198 156
SPECIFICATIONS MQ 50C
260 290
POWER 508 290 400V)
30 - 20 - 10 - 5 W (100 205
P - 40 CONSTANT VOLTAGE MQ 80P- 41 100 V, 70 MQ
V 50 - 42
FREQUENCY RESPONSE 70 ÷ 20.000 Hz (± 3 dB)
186 SENSITIVITY (1 m / 1 W) 319 92 dB 175
MAXIMUM SOUND PRESSURE 112 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 120°
104 223 245
3˙000 g
122 10 27
163
SPECIFICATIONS MQ 50i
POWER 30 - 20 - 10 - 5 W (100 V)
CONSTANT VOLTAGE 100 V, 70 V
FREQUENCY RESPONSE 180 ÷ 20.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 90 dB
MAXIMUM SOUND PRESSURE 108 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 120° (HORIZ.); 100° (VERT.)
76
MONITOR Q SERIES
3˙000 g
LOUDSPEAKERS
120
ÃÃ 3 way column array speaker system providing natural high intelligibility hi-
fidelity sound of both speech and music
ÃÃ Body is made of self-extinguishing (HB level) high density polystyrene
ÃÃ The wide horizontal coverage angle (180°) and the 60° asymmetrical vertical
dispersion allow the correct sound reproduction and feedback reduction
ÃÃ MQ 100L is equipped with: 2 rubber surround 3.5” woofers, 2 fabric
surround 3.5” mid-woofers, 2 cloth coated 0.75” dome tweeters
ÃÃ Mounting accessories are included. These have been studied to keep the
column as close as possible to the wall and simplify its installation
ÃÃ The pre-oriented vertical acoustic axis allows to cover already the majority of
the installations.
ÃÃ Provided with accessories to orient the speaker down of extra 5° and 10°
ÃÃ Built-in multi-tapped transformer (40 – 20– 10 -5 W) for 100 V constant
voltage connection
MR 44 - 35 MR 55 - 36
ÃÃ 16-ohm input that can be selected by switch with MAX power 60 W
MSW 8 - 38 MQ 90 - 39
8˙000 g
77
HORN
SPEAKERS
Designed to be weather resistant
and to withstand high sound
pressure levels outdoor or in large
environments.
78
HORN SPEAKERS
LOUDSPEAKERS
ÃÃ Compact speaker with high directivity and efficiency for intelligible speech reproduction
ÃÃ Driver impedance 8 Ω
ÃÃ Selector accessible on rear cover
ÃÃ IP 66 double insulation construction for temperatures between -25°C and +70°C
ÃÃ High-pass filter for protection of the driver against low frequencies out of range
ÃÃ Body in UV stabilised self-extinguishing ABS, RAL 7035 grey
ÃÃ Stainless steel attachment bracket included
SPECIFICATIONS HD 3216/T
POWER 25 W RMS – 38 W MAX
CONSTANT VOLTAGE 25-20-15-10-5 W
FREQUENCY RESPONSE 100 V; 70V
SENSITIVITY (1 m / 1 W) 250 ÷ 10.000 Hz (± 3 dB)
MAXIMUM SOUND PRESSURE 106 dB
ANGLE OF COVERAGE 60° (HORIZ.); 50° (VERT.)
SPECIFICATIONS HD 216/ST
POWER 20 - 10 - 5 - 2.5 W (100 V)
CONSTANT VOLTAGE 100 V; 70 V; 25 V
FREQUENCY RESPONSE 350 ÷ 15.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 108 dB
MAXIMUM SOUND PRESSURE 123 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 80° (HORIZ. AND VERT.)
79
HORN SPEAKERS
SPECIFICATIONS HD 210/T
POWER 20 - 10 - 5 - 2.5 W (100 V)
CONSTANT VOLTAGE 100 V; 70 V
FREQUENCY RESPONSE 300 ÷ 9.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 108 dB
MAXIMUM SOUND PRESSURE 121 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 70° (HORIZ. AND VERT.)
SPECIFICATIONS HD 310/T
POWER 30 - 20 - 15 - 10 - 5 W (100 V)
CONSTANT VOLTAGE 100 V; 70 V
FREQUENCY RESPONSE 240 ÷ 10.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 108 dB
MAXIMUM SOUND PRESSURE 123 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 80° (HORIZ. AND VERT.)
SPECIFICATIONS HD 410/T
POWER 50 - 30 - 25 - 15 W (100 V)
CONSTANT VOLTAGE 100 V; 70 V
FREQUENCY RESPONSE 180 ÷ 7.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 112 dB
MAXIMUM SOUND PRESSURE 130 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 80° (HORIZ. AND VERT.)
80
HORN SPEAKERS
ÃÃ For alarm and paging systems in places with a high level of background noise
LOUDSPEAKERS
800 g ÃÃ High-pass filter for protection of the driver against low frequencies out of range
Ø 110 x 93 mm ÃÃ Body in plastic, RAL 7035 grey
ÃÃ Suitable for outdoor use
ÃÃ Attachment steel bracket included
SPECIFICATIONS HD 1110
POWER 20 W RMS - 30 W MAX
SPEAKER IMPEDANCE 8Ω
FREQUENCY RESPONSE 900 ÷ 13.000 Hz (± 3 dB)
SENSITIVITY (1 m / 1 W) 101 dB
MAXIMUM SOUND PRESSURE 116 dB (1 m / POWER MAX)
ANGLE OF COVERAGE 180° (HORIZ. AND VERT.)
SPECIFICATIONS H 6045
POWER 200 W RMS - 300 W MAX (WITH 4 DRIVER D 5076)
CONSTANT VOLTAGE 100 V; 70 V; 25 V (with 4 transformer TD 507)
FREQUENCY RESPONSE 150 ÷ 12.000 Hz (± 3 dB) (WITH 4 DRIVER D 5076)
SENSITIVITY (1 m / 1 W) 101 dB
MAXIMUM SOUND PRESSURE 132 dB (1 m / POWER MAX, 4 DRIVER D 5076)
ANGLE OF COVERAGE 60° (HORIZ.); 50° (VERT.)
81
ATTENUATORS,
AUDIO TRANSFORMERS
AND ACCESSORIES
To adjust the settings of the audio
system according to any needs.
ATTENUATORS ÃÃ The volume control is made of a control circuit having a 6 position (5 + off) selector and a separated
transformer
ÃÃ Installed on whichever supporting frame for home / office electrical systems by drilling a hole in a blank key
(SWITCHERS) and fixing its control circuit
ÃÃ 3 knobs are included in 3 different colours: white, silver, anthracite
ÃÃ The maximum depth of the volume control circuits are measured between the inner side of the front panel
SPECIFICATIONS AT 10Z
IN/OUT IMPEDANCE 4Ω
MAX. POWER 10 W
ATTENUATION 0 dB - 6 dB - 12 dB - 18 dB - 24 dB - OFF
MAX. DEPTH 50 mm
SPECIFICATIONS AT 20T
INPUT VOLTAGE 100 V
MAX. POWER 20 W
ATTENUATION 0 dB - 3 dB - 6 dB - 9 dB - 12 dB - OFF
MAX. DEPTH 50 mm
82
ATTENUATORS/SWITCHERS
SPECIFICATIONS AT 40T
INPUT VOLTAGE 100 V
MAX. POWER 40 W
ATTENUATION 0 dB - 3 dB - 6 dB - 9 dB - 12 dB - OFF
MAX. DEPTH 58 mm
CT 61 p/n 131.60.036
SPECIFICATIONS Ct 61
INPUT VOLTAGE 100 V
MAX. POWER 120 W
MAX. DEPTH 58 mm
SPECIFICATIONS TL 128
INPUT VOLTAGE 100 - 70 - 50 - 35 - 25 - 18 - 12 V
MAX. POWER 120 W
MINIMUM LOAD IMPEDANCE 83.3 - 41.7 - 20.8 - 10.4 - 5.2 - 2.6 - 1.3 Ω
FREQUENCY RESPONSE 60 ; 18.000 Hz (± 3 dB)
CP 52 p/n 131.60.034
SPECIFICATIONS CP 52
MAX INPUT VOLTAGE 100 V
MAX. POWER 120 W
MAX. DEPTH 58 mm
83
LINE TRANSFORMERS
UNIVERSAL LINE ÃÃ High quality transformers suitable to connect loudspeakers with 4-8 Ω impedance (TD 105
excluded) to constant voltage lines (70-100V). It's possible to select different power values choosing
different outputs.
TRANSFORMERS ÃÃ Thanks to material over-sizing and alternate layer windings, they offer high performance: dynamics
and frequency response are particularly extended. They are suitable to drive professional speakers
through constant voltage power amplifiers (TD 105 excluded)
SPECIFICATIONS TD 10
OUTPUT POWER 4 Ω 1.2 - 2.5 - 5 - 10 W
OUTPUT POWER 8 Ω 0.6 - 1.2 - 2.5 - 5 - 10 W
FREQUENCY RESPONSE 50÷18'000 Hz
DIMENSIONS 86 x 53 x 59 mm
WEIGHT 500 g
SPECIFICATIONS TD 30
OUTPUT POWER 4 Ω 15 - 30 W
OUTPUT POWER 8 Ω 7.5 - 15 - 30 W
FREQUENCY RESPONSE 50÷18'000 Hz
DIMENSIONS 87 x 53 x 68 mm
WEIGHT 700 g
SPECIFICATIONS TD 60
OUTPUT POWER 4 Ω 15 - 30 - 60 W
OUTPUT POWER 8 Ω 7.5 - 15 - 30 - 60 W
FREQUENCY RESPONSE 50÷18'000 Hz
DIMENSIONS 77 x 77 x 79 mm
WEIGHT 1200 g
SPECIFICATIONS TD 120
OUTPUT POWER 4 Ω 30 - 60 - 120 W
OUTPUT POWER 8 Ω 15 - 30 - 60 - 120 W
FREQUENCY RESPONSE 50÷18'000 Hz
DIMENSIONS 85 x 85 x 90 mm
WEIGHT 1900 g
SPECIFICATIONS TD 240
OUTPUT POWER 4 Ω 60 - 120 - 240 W
OUTPUT POWER 8 Ω 30 - 60 - 120 - 240 W
FREQUENCY RESPONSE 50÷18'000 Hz
DIMENSIONS 98 x 89 x 100 mm
WEIGHT 3100 g
84
DIAPHRAGMS
SPECIFICATIONS IM 2220
SIGNAL TEST FREQUENCY 1 kHz
ACCURACY ± 2%
85
RACK
COMPONENTS
For the optimum management of
the system configurations.
86
RACK ENCLOSURES
CR 2600
RACK ENCLOSURES
RACK COMPONENTS
ÃÃ The CR 2600 series rack enclouseres are designed to hold all
RCF 19" rack standard components.
ÃÃ They are constructed in compliance with the IEC 297-2
dimensional standard, and the depth is 600 mm for all models.
ÃÃ The structure is made of steel painted RAL 7035 light grey. The
rack enclosures are bake-painted at high temperature using
epoxy powders to make the structure unalterable over time
and resistant to scratching, abrasion, and atmospheric agents.
ÃÃ The protection level is IP 30. The CR 2600 SERIES rack
enclosures are composed of a basic structure that is assembled
simply and quickly by fitting and securing four steel uprights to
the upper and lower panels.
ÃÃ The lower door and side panels are fitted following the wiring
operations to facilitate the insertion and connection of the
components. The lower panel, which forms the base of the
rack, has openings for the passage of external connection
cables (speaker lines, power supply, data, etc.) that are
sized and shaped to guarantee the electrical safety of the
structure. The earthing of the rack complies with current safety
regulations.
ÃÃ For the optimisation of the internal wiring, supports are
supplied to gather the cable and attach them in an orderly
fashion. The packing materials can be reused for transport the
enclosure once it has been wired.
ÃÃ Front doors are also available, which are useful for to protect
the components installed in the rack.
PV 2603 p/n171.70.137
88
44 VENTILATION UNIT
271
483
ÃÃ PV
RD2603
2008 is a- ventilation
4 unit composed by 3 blowers (230 VR 10
V ac) and a main switch. The blowers turn on due to the
activation command of a thermostat included ia all RCF CR
2600 rack cabinets series.
ÃÃ The ventilation unit has an air flow capacity of 500 m /h
ÃÃ 9" Rack muonting, 1 unit
ÃÃ Main
44 switch placed on the rear panel 44
ÃÃ Low noise
244
483 87
RACK ACCESSORIES
ÃÃ Front ventilation panel, 1U for CR 2600 series racks, RAL 9005 black
CLOSURE PANELS
PU 1 PU 2
p/n 171.70.145 p/n 171.70.146
PU 3
p/n 171.70.147
PU 4
p/n 171.70.148
ÃÃ RAL 9005 black ÃÃ RAL 9005 black ÃÃ RAL 9005 black ÃÃ RAL 9005 black
88
RACK COMPONENTS
RT 2006 - 2 SA 2095 - 3
2˙900 g
RACK COMPONENTS
VR 1004 - 5 ÃÃ Allows centralised switch-on of the equipment installed in
the rack enclosure and directly connected to the 230 Vac 8A
output.
ÃÃ 6 unbalanced inputs on terminal strip 775mV for pre-liste-
ning to sound sources, selection switch
ÃÃ Balanced inputs on terminal strip for 100/70/50V power
44 160 amplifier for audio monitoring of six amplifiers at constant
244 voltage, selection switch
483 483 ÃÃ Internal monitor loudspeaker with volume control, LED VU
Meter
ÃÃ 1U 19” rack
ÃÃ Color: grey RAL 7021
SPECIFICATIONS SA 2095
SOURCE INPUTS - SENSITIVITY 0 dBu (775 mV)
POWER AMPLIFIERS - SENSITIVITY 100 V (70 V o 50 V SELECTABLE INTERNALLY); COSTANT IMPEDANCE
SENSITIVITY VU-METER 0 dBu (775 mV); (200 mV o 80 mV SELECTABLE INTERNALLY)
ATTENUATION VOLUME SPEAKER 0 dB - 1.2 dB - 1.9 dB - 3 dB - 5.2 dB - OFF
REMOT CONTROL BY MEANS OF CONTACT OR 10÷24 Vdc EXTERNAL SUPPLY
MAX. CURRENT THAT CAN BE TAPPED 8 A (AC OUTLET)
POWER SUPPLY 220÷240 V / 110÷120 V (50 / 60 Hz)
CONSUMPTION 10 VA
CONNECTORS INPUT/OUTPUT SCREW RERMINAL
ACCESSORIES
AC XLR-3M3F ÃÃ XLR CONNECTORS KIT:
RACK COMPONENTS
RD 2008 - 4 VR 10
2˙900 g
SPECIFICATIONS RD 2008
OUTPUTS-VOLTAGE PV 2603 - 1 RT (775
0 dBu 2006mV)- 2 SA 209
FREQUENCY RESPONSE 20 - 3.800 Hz
SAMPLING FREQUENCY 8 kHz
RECORDING CYCLES 100.000
SENSITIVITY IN INPUT 88- 55 dBu (2.45 mV); (AUX) 0 dBu (775 mV)
(MIC)
44 VENTILATION UNIT
271 383 44
POWER SUPPLY 220÷240 V / 110÷120 V (50 / 60 Hz)
483 483
CONNECTORS INPUT 1 x XLR - SCREW TERMINAL
CONNECTORS OUTPUT SCREW TERMINAL
3˙900 g
44 44 160
244
483 483
SPECIFICATIONS VR 1004
OUT POWER 60 W (1 attenuator)
OUTPUT VOLTAGE 100 V, 70 V
ATTENUATION 0 dB - 1.2 dB - 1.9 dB - 3 dB - 5.2 dB - OFF
REMOTE CONTROL DRY CONTACT OR 10÷24 Vdc EXTERNAL SUPPLY
MINIMUM IMPEDANCE TO THE SECONDARY [100 V]: 167 Ω - [70 V]: 82 Ω
POWER SUPPLY 220÷240 V / 110÷120 V (50 / 60 Hz)
CONSUMPTION 10 VA
CONNECTORS SCREW TERMINAL
90
POWER TRANSFORMERS
271 383 44
483
RACK COMPONENTS
483
RD 2008 - 4 VR 1004 - 5
ÃÃ The RT 2006 is a 2 standard unit 19" high rack container to
house and connect up to 6 TD 300 transformers, 4 model TD
500 transformers or 2 TD 1000 transformers.
ÃÃ Different transformers can also be combined within the
transformer panel.
44 44
244 ÃÃ The RT 2006 has an interface circuit with connection160
terminals between amplifiers, transformers and speaker lines.
483 483
ÃÃ The connections are all removable and sized for maximum
applicable power.
ÃÃ Easy transformer installation and connection to terminals
ÃÃ Thanks to material over-sizing and alternate layer windings,
frequency response of the transformers is particularly
extended. These transformers can be used also with
professional high performance loudspeakers.
Nominal 300W TD 300 Toroidal transformer, main 4Ω, Nominal 500W TD 500 Toroidal transformer, main 4Ω, Nominal 1000W TD 1000 Toroidal transformer, main
secondary 100V secondary 100V 4Ω, secondary 100V
Terminals for quick connection to panel RT 2006 Terminals for quick connection to panel RT 2006 Terminals for quick connection to panel RT 2006
Quick transformer mounting inside the rack chassis with Quick transformer mounting inside the rack chassis with Quick transformer mounting inside the rack chassis with
the supplied kit the supplied kit. the supplied kit
91
MOBILE
AMPLIFICATION
Portable systems for all the
situations in which mobility is
important.
SPECIFICATIONS MG 80
NOMINAL POWER 10 W RMS - 25 W MAX
FREQUENCY RESPONSE 500 ÷ 9.000 Hz (± 3 dB)
S/N RATIO 50 dB (1 W)
MICROPHONE SENSITIVITY - 37 dB ± 3 dB
DISTORTION < 1.5 % (1 kHz)
DIMENSIONS Ø 230 x 370 mm
WEIGHT 1.4 Kg (NO BATTERY)
92
MOBILE AMPLIFICATION SYSTEMS
TX 516 - 2 PX 516 - 3
AM 6020 45
p/n 121.10.012
MOBILE AMPLIFIER ÃÃ 2 unbalanced AUX stereo inputs on DIN connector
1 balanced microphone input on DIN connector, 1 balanced63
7
9
B
5
mu te
ON /
ÃÃ microphone input on XLR connector
3
mute
pw r
1
line
pe ak
mic
D - 8 64,1 75
E - 8 64,5 50
F - 8 64,9 50
ÃÃ
- 8 63,8 00
Circuit for automatic attenuation of music in the presence of announcements
sn s
8 63,4 25
863,0 50
58,9 75
58,6 50
MOBILE AMPLIFICATION
ÃÃ One-tone signal generator 600 Hz (siren)
250 ÃÃ 30 overload and short 170
Protection against circuits
ÃÃ Power supply 12 Vdc or 24 Vdc selectable
AM 6020 - 5 SPECIFICATIONS AM 6020
TYPE STEREO AMPLIFIER
SPECIFICATIONS MD 6000-x
MD 6000-X
TYPE Dynamic, unidirectional
52 IMPEDANCE 600 Ω
FREQUENCY RESPONSE 60 ÷ 3000 Hz
SENSITIVITY - 70 dB ± 3 dB (0 dB=1V/μbar, 1kHz)
101
CONNECTORS 3 pin XLR
93
PORTABLE SPEAKERS
PORTABLE BI-AMPLIFIED
SPEAKER WIITH CD/USB/MP3 PLAYER
5˙150 g ÃÃ Portable bi-amplified speaker with integrated sound source
mm ÃÃ Works with internal rechargeable batteries or 12V adapter
ÃÃ Digitally controlled integrated recharge system
ÃÃ UHF receiver with gain control, to be used with TX516 or PX516
ÃÃ XLR universal mic/line input with gain control
342 ÃÃ Auxiliary input on RCA connectors
ÃÃ LED radio carrier, battery, speaker status indication
ÃÃ Easy to carry thanks to top handle and carrying belt
212 215 ÃÃ Mounting hole for standard microphone stand
ÃÃ CD/USB/Mp3 player with infrared remote control included
ÃÃ 230Vac adapter and 10 type C batteries included
ÃÃ Battery duration 2 to 4 hours depending on the use
Rear view
94
PORTABLE SPEAKERS
MOBILE AMPLIFICATION
mm
ÃÃ ON/OFF and Mute switches
ÃÃ Digital radio carrier control
ÃÃ LED battery status indicato
SPECIFICATIONS TX 516
TYPE ELECTRET, CARDIOID, HANDHELD
CARRIER FREQUENCY UHF, 770÷870 MHz
FREQUENCY RESPONSE 35 ; 16.000 Hz
POWER CONSUMPTION 60 mA
IRRADIATED POWER 10 mW (MAX)
SPECIFICATIONS PX 516
TYPE BELT PACK
CARRIER FREQUENCY UHF, 770÷870 MHz
POWER CONSUMPTION 60 mA
IRRADIATED POWER 10 mW (MAX)
INPUT AUDIO SENSIBILITY 50 mV ÷ 5 V RMS
CONNECTOR JACK 3.5 mm, 3 POLE SCREW DOWN
LAVALIER MINIATURE
MICROPHONE
HEADSET MICROPHONE
PRODUCT p/n PagE PRODUCT p/n PagE PRODUCT p/n PagE PRODUCT p/n PagE
96
HEADQUARTERS:
05/2012-SM
RCF S.p.A. Italy
tel. +39 0522 274 411
e-mail: info@rcf.it
RCF UK
tel. 0844 745 1234
Int. +44 870 626 3142
e-mail: info@rcfaudio.co.uk
RCF France
tel. +33 1 49 01 02 31
e-mail: france@rcf.it
RCF Germany
tel. +49 2203 925370
e-mail: germany@rcf.it
RCF Spain
tel. +34 91 817 42 66
e-mail: info@rcfaudio.es
RCF Belgium
tel. +32 (0) 3 - 3268104
e-mail: belgium@rcf.it
www.rcf.it