Академический Документы
Профессиональный Документы
Культура Документы
Solutions
EZ-SCREEN Series Safety Light Screens
• Intuitive diagnostics simplify setup, facilitate troubleshooting and
streamline installation
• No blind zone design provides end-to-end sensing to eliminate
gaps in detection
• Metal end caps, sturdy aluminium housing and a recessed window
to avoid damage from impact
• Standard pairs, cascade systems, versions with integrated muting
and extensive accessories to suit a wide variety of safeguarding
configurations
• Type 4 and Type 2 versions available
Two-Hand Control
• Ergonomic design, avoids risk of
repetitive strain injury
• Optional run bar stand
• Meets highest safety category
• Add EZ-LIGHTS for status indication in lean
manufacturing
2
Emergency Stop and Stop Control
• Available as panel mount, or as pre-assembled
enclosures
• Models with illumination help operators to quickly
identify actuated buttons
• Easy to mount enclosures with error free and
quick wiring using M12 cables
Enabling Devices
• Provides safety function when
user either squeezes or releases
the handle grip switch
• Ergonomic design with a
detented enable position
Safety Scanner
• Two-dimensional laser scanner with easy-to-use software
• Programming of irregular shaped warning and detection zones
• 190° scanning angle with selectable resolutions (30 mm, 40 mm,
50 mm, 70 mm and 150 mm) and a 4 m or 6.25 m range
www.bannerengineering.com/eu 3
(Expandable) Safety Controller
Cat 4 PLe (EN ISO 13849), SIL 3 (IEC 61508), SIL CL 3 (IEC 62061)
Add up to 8 expansion I/O modules – choose from 6 expansion modules
Inputs/
Model (24 VDC) Description Housing Safety Outputs
Convertible
CONTROLLER
Programmable Controller,
SC26-2, e, d & de 45 mm 26/8 2 Dual Channel PNP 0.5 A @ 24 VDC
C
non-expandable
XS26-2, e, d & de Programmable Controller, expandable 45 mm 26/8 2 Dual Channel PNP 0.5 A @ 24 VDC
XS2so Safety Output Module 22.5 mm / 2 Dual Channel PNP 0.75 A @ 24 VDC
XS4so Safety Output Module 22.5 mm / 4 Dual Channel PNP 0.5 A @ 24 VDC
Accessories
Model Description
IN1 IN2 IN3 IN4 IN5 IN6 24V 0V IO1 IO2 IO3 IO4 IO1 IO2 IO3 IO4 IO1 IO2 IO3 IO4 IO1 IO2 IO3 IO4 IO1 IO2 IN1 IN2 13 14 23 24 13 14 23 24
IN7 IN8 IN9 IN10 IO1 IO2 IO3 IO4 IN1 IN2 IN3 IN4 IN1 IN2 IN3 IN4 IN1 IN2 IN3 IN4 IN1 IN2 IN3 IN4 31 32 31 32
Add Module
Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault
USB Tx / Rx Tx / Rx Tx / Rx Tx / Rx Tx / Rx Tx / Rx Tx / Rx
Inputs Inputs Inputs Inputs Inputs Inputs SO1 SO1
SO1 SO2
SO2
ESC
IN1 IN2 IN3 IN4 IN5 IN6 24V 0V IO1 IO2 IO3 IO4 IO1 IO2 IO3 IO4 IO1 IO2 IO3 IO4 IO1 IO2 IO3 IO4 IO1 IO2 IN1 IN2 13 14 23 24 13 14 23 24
OK IN7 IN8 IN9 IN10 IO1 IO2 IO3 IO4 IN1 IN2 IN3 IN4 IN1 IN2 IN3 IN4 IN1 IN2 IN3 IN4 IN1 IN2 IN3 IN4 31 32 31 32
XS16si
IN5 IN6 IN7 IN8 IN5 IN6 IN7 IN8 61 62
IN15 IN16 IN17 IN18 SO1a SO1b SO2a SO2b IN9 IN10 IN11 IN12 IN9 IN10 IN11 IN12 IN9 IN10 IN11 IN12 IN9 IN10 IN11 IN12 IN3 IN4 IN5 IN6 43 44 53 54
Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault
USB Tx / Rx Tx / Rx Tx / Rx Tx / Rx Tx / Rx Tx / Rx Tx / Rx
Inputs Inputs Inputs Inputs Inputs Inputs SO1 SO1
ŚĞĐŬ>ŝƐƚ;ϮͿ SO1
SO2
SO2
ESC
IN11 IN12 IN13 IN14 IO5 IO6 IO7 IO8 IN5 IN6 IN7 IN8 IN5 IN6 IN7 IN8 IN5 IN6 IN7 IN8 IN5 IN6 IN7 IN8 61 62
Add modules
XS2so XS4so XS2ro XS1ro IN15 IN16 IN17 IN18 SO1a SO1b SO2a SO2b IN9 IN10 IN11 IN12 IN9 IN10 IN11 IN12 IN9 IN10 IN11 IN12 IN9 IN10 IN11 IN12 IN3 IN4 IN5 IN6 43 44 53 54
M0:ES3
M1:GS4
M1:GS4
DϮ͗K^ϭ
DϮ͗D^Wϭ
M3:MSP3
M3:SM1
M8:SO4
Add safety
2 Dual Channel 4 Dual Channel 2 Dual Channel 1 Single Channel
OSSD Module OSSD Module Relay Module Relay Module
M0:ES4
M0:ES5
M1:GS4 Dϯ͗^DϮ
devices
M0:MR1
M0:GS1
DϬ͗'^Ϯ
WƌŽƉĞƌƟĞƐ M0:GS3
Cancel IN1
IN7
ESC
IN2
IN8
IN3
IN9
Power / Fault
USB
Inputs
SO1
SO2
IN4
IN10
IN5
IO1
IN6
IO2
SC26-2de
24V
IO3
0V
IO4
M0:GS4
OK
Name Value
Has Display Yes
Has Ethernet Yes
Is Expandable Yes
IO Terminals Rema 0
IN Terminals Rema 0
Add Equipment
Safety Input
4
Configure Your System in Minutes
Configuration
Assorted View Menus
Page Number
1/5
Module Summary Equipment Functional View Wiring Diagram Ladder Logic Industrial Ethernet Configuration Summary
Module IN1
IN7
IN2
IN8
IN3
IN9
Power / Fault
USB
Inputs
SO1
SO2
IN4
IN10
IN5
IO1
IN6
IO2
SC26-2de
24V
IO3
0V
IO4
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
Power / Fault
Tx / Rx
Inputs
IO4
IN4
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
Power / Fault
Tx / Rx
Inputs
IO4
IN4
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
Power / Fault
Tx / Rx
Inputs
IO4
IN4
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
Power / Fault
Tx / Rx
Inputs
IO4
IN4
IO1 IO2 IN1
XS8si
Power / Fault
Tx / Rx
Inputs
IN2 13
31
14 23
32
XS1ro
Power / Fault
Tx / Rx
SO1
24 13
31
14 23
32
XS2ro
Power / Fault
Tx / Rx
SO1
SO2
24
M0:ES1
ESC
Summary OK
M0:ES4
M0:ES5
M0:MR1 A6
M4:OS2
M0:GS1
M0:GS2
Inputs
M0:GS3 T1 M0:SO2
IN
M0:GS4 A2
WƌŽƉĞƌƟĞƐ M1:GS1
IO1 IO2 IO3 IO4
IN1 IN2 IN3 IN4
XS16si
Power / Fault
Tx / Rx
Inputs
Name Value
M1:GS3
IO Terminals Rema 1
IN Terminals Rema 0
M1:GS4 A3
M1:GS5
M1:GS6
Delete Edit
Simple
Drag-and-Drop Function Block Outputs
Connections
Wiring Diagram
1/9 Wiring Diagram in
Module Summary Equipment Functional View Wiring Diagram Ladder Logic Industrial Ethernet Configuration Summary
IN1
IN7
ESC
OK
IN2
IN8
IN3
IN9
Power / Fault
USB
Inputs
SO1
SO2
IO5
IN6
IO2
SC26-2de
IO6
24V
IO3
IO7
IN15 IN16 IN17 IN18 SO1a SO1b SO2a SO2b
0V
IO4
IO8
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
Power / Fault
Tx / Rx
Inputs
IN5
IN9
IN6 IN7
IO4
IN4
IN8
IN10 IN11 IN12
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
Power / Fault
Tx / Rx
Inputs
IN5
IN9
IN6 IN7
IO4
IN4
IN8
IN10 IN11 IN12
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
Power / Fault
Tx / Rx
Inputs
IN5
IN9
IN6 IN7
IO4
IN4
IN8
IN10 IN11 IN12
SO1a SO1b SO2a SO2b
24V 24V 0V
XS4so
Power / Fault
Tx / Rx
SO1
SO2
SO3
SO4
0V
Power
XS
Tx / Rx
SO1
SO2
SO3
SO4
SO3a SO3b SO
0
IN2
+IO2*
M0:ES1
+IO8
IN18 M0:GS4
Live Mode
IN1 +IO7*
+IO1*
ŚĞĐŬ>ŝƐƚ;ϮͿ SO1b
M0:SO1
Connect M5:OS1. IN4 SO1a
Module Position: 0
Connect M5:RP1. +IO2*
M0:ES2 SO2b 1/1
IN3 M0:SO2
SO2a
+IO1* Module Summary Equipment Functional View Wiring Diagram Ladder Logic Industrial Ethernet Configuration Summary Live Mode
24V
24V dc Power
IN1 IN2 IN3 IN4 IN5 IN6 24V 0V
IN6
IN7 IN8 IN9 IN10 IO1 IO2 IO3 IO4
SC26-2de
0V
Power / Fault
USB
IN2 IN7
Inputs
SO1
SO2
24V
+IO4* M0:ES1
ESC
OK
IN8
IN5 IN1 IN2 IN3 IN4 IN5 IN6 24V 0V
IN7 IN8 IN9 IN10 IO1 IO2 IO3 IN2
IO4 IN9
+IO3* M0:THC1
24V
Inputs M0:OS1
+IO3
IN10 +IO5
SO1
+IO6* IN2 +IO6
SO2
24V
M0:ES5 M0:MSP1
IN9 +IO4 IN15
IN1 IN2 IN3 IN4 IN5 IN6 24V 0V
+IO5* ESC IN6 IN16
24V
WƌŽƉĞƌƟĞƐ M0:MR1 IN7 IN8 IN9 IN10 IO1 IO2 IO3 IO4
IN17
IN11
24V
M0:MR1
+IO8
M0:STAT1
IN18 XS26-2de
IN13 Power / Fault
IN12
+IO5*
IN15
M0:GS1
OK
+IO7
SO1b
M0:STAT2
M0SO1
USB
Inputs
SO1
Ladder Logic
SO1a
IN14 M0:GS2 SO2
IN11 IN12 IN13 IN14 IO5 IO6 IO7 SO2aIO8
+IO6* M0:SO2A
WƌŽƉĞƌƟĞƐ
IN15 IN16 IN17 IN18 SO1a SO1b SO2a SO2b ESC
IN17
SO2b
M0:SO2B
IN16 M0:GS3
+IO7* 24V
24V dc Power
0V
Module Summary Equipment Functional View Wiring Diagram Ladder Logic Industrial Ethernet Configuration Summary
Module: M0:XS26-2de OK
Module: M0:XS26-2de IN1
IN7
IN2
IN8
IN3
IN9
IN4
IN10
IN5
IO1
IN6
IO2
SC26-2de
24V
IO3
0V
IO4
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
IO4
IN4
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
IO4
IN4
IO1
IN1
IO2
IN2
IO3
IN3
XS16si
IO4
IN4
SO1a SO1b SO2a SO2b
24V 24V 0V
XS4so
0V
SO1a SO1b SO
24V 24V
XS
0
+24V 0V
CR01 M0:SO1
Power / Fault Power / Fault Power / Fault Power / Fault Power / Fault Power
NOTES:
USB Tx / Rx Tx / Rx Tx / Rx Tx / Rx Tx / Rx
Inputs Inputs Inputs Inputs SO1 SO1
SO1 SO2 SO2
SO2 SO3 SO3
SO4 SO4
ESC
Symbols are shown using the Stop state signal convention except for Emergency Stop, Rope Pull, Gate Switch, and IN11 IN12 IN13 IN14 IO5 IO6 IO7 IO8 001
A
OK
CR01
www.bannerengineering.com/eu 5
Choosing your EZ-SCREEN Model
EZ-SCREEN LP (Low Profile) Compact design and flexible mounting options deliver
an exact fit with no blind zone
• Type 4 per IEC 61496-1, -2; Category 4 PLe per EN ISO 13849-1;
SIL 3 per IEC 61508; SIL CL 3 per IEC 62061
Multi-directional
• 14 mm or 25 mm detection capability
cables can be
routed in any • Defined areas from 270 to 1810 mm in 140 mm increments with
direction detection ranges up to 7 m
• Standard, cascade and integrated muting models available
• Compact 26 x 28 mm housing
EZ-SCREEN Standard Easy alignment and maintenance saves you setup time
and troubleshooting
• Type 4 per IEC 61496-1, -2; Category 4 PLe, per EN ISO 13849-1;
SIL 3 per IEC 61508: SIL CL 3 per IEC 62061
• 14 mm or 30 mm detection capability
An exact readout Error codes make • Defined area from 150 to 2400 mm in 150 mm increments with
of number of troubleshooting detection ranges up to 18 m
beams blocked easy • Superior optical design and finely focused ±2.5° beam make systems
extremely easy to align and maintain
Unique LED zone DIP switch • Cascading models allow up to four systems of any length and
indicators configuration resolution to be wired together to form a single safety device
• Heavy-duty housing, 35 x 45 mm
6
Introducing the EZ-SCREEN LS Safety Light Screen
Heavy-duty
Optional EZLSA- No Connector to
K30LGR status Metal End Cap Break Off
indicator available
for use with cascade
receivers
Metal Plastic
Dimensions Environ-
Max Sensing DIP
Defined Area Safety Rating (H x W x D) mental
Range Switches
(H varies by model) Rating
www.bannerengineering.com/eu 7
EZ-SCREEN LS – Standard
Type 4, Cat 4 PLe, SIL 3, SIL CL 3 – Finger, hand and ankle detection
2 PNP Safety Outputs (OSSD) and 1 auxiliary output (CSSI) (8-pin models only), 24 VDC power supply
E = Emitter only 14 = 14 mm 280 = 280 mm 1050 = 1050 mm P8 = 300 mm pigtail, 8-Pin M12
R = Receiver only 23 = 23 mm 350 = 350 mm 1120 = 1120 mm QD (individual Emitter or
P = Pair (Emitter 40 = 40 mm 420 = 420 mm 1190 = 1190 mm Receiver models)
and Receiver) 490 = 490 mm 1260 = 1260 mm P88 = 300 mm pigtail, 8-Pin
560 = 560 mm 1330 = 1330 mm M12 QD (on both Emitter
630 = 630 mm 1400 = 1400 mm and Receiver models)
700 = 700 mm 1470 = 1470 mm Blank = no pigtail, RD
770 = 770 mm 1540 = 1540 mm connection (for
840 = 840 mm 1610 = 1610 mm RDLS-8..D cordset)
910 = 910 mm 1680 = 1680 mm
*5-pin M12 QD options
980 = 980 mm 1750 = 1750 mm
available (P5 or P55)
1820 = 1820 mm
Cordsets Cordsets
Length RD (Remote Disconnect) Length 8-Pin M12
22.8 m QDE-875D
SLLP..–... with RDLS-8..D 30.4 m QDE-8100D
0.3 m trunk
CSB-M1281M1281
2 x 0.3 m branches Double-Ended Cordsets
2.44 m trunk
CSB-M1288M1281 8-Pin M12 8-Pin M12
2 x 0.3 m branches Length Length
Double-Ended Double-Ended
4.57 m trunk
CSB-M12815M1281 0.3 m DEE2R-81D 7.6 m DEE2R-825D
2 x 0.3 m branches
7.62 m trunk 0.9 m DEE2R-83D 9.1 m DEE2R-830D
CSB-M12825M1281
2 x 0.3 m branches
2.5 m DEE2R-88D 15.2 m DEE2R-850D
Standard cordsets are yellow PVC with black overmould. For black
3.6 m DEE2R-812D 22.9 m DEE2R-875D
PVC and overmould, add suffix B to the model number (example
CSB-M1280M1280B) 4.6 m DEE2R-815D 30.5 m DEE2R-8100D
8
EZ-SCREEN LS – Cascade
Type 4, Cat 4 PLe, SIL 3, SIL CL 3 – Finger, hand and ankle detection
2 PNP Safety Outputs (OSSD) and 1 auxiliary output (CSSI) (8-pin models only), 24 VDC power supply
C = Cascade E = Emitter only 14 = 14 mm 350 = 350 mm 1050 = 1050 mm P8 = 300 mm pigtail, 8-Pin M12
R = Receiver only 23 = 23 mm 420 = 420 mm 1120 = 1120 mm QD (first individual Emitter
P = Pair (Emitter 40 = 40 mm 490 = 490 mm 1190 = 1190 mm or Receiver models)
and Receiver) 560 = 560 mm 1260 = 1260 mm P88 = 300 mm pigtail, 8-Pin
630 = 630 mm 1330 = 1330 mm M12 QD (first paired
700 = 700 mm 1400 = 1400 mm models)
Slaves 770 = 770 mm 1470 = 1470 mm Blank = no pigtail, RD
840 = 840 mm 1540 = 1540 mm connection (for middle/
910 = 910 mm 1610 = 1610 mm end units in cascade)
980 = 980 mm 1680 = 1680 mm
*5-pin M12 QD options
1750 = 1750 mm
available (P5 or P55)
1820 = 1820 mm
Note:
• Determine the configuration of the first EZ-SCREEN LS pair (master connected to the machine control)
• Determine the remaining (second, third or fourth) pairs (slaves connected to the master using a DELS-.. cordset)
Master
3m PMEF-810D
SLLCP..–... with DELS-....E plus
SLLCP..–... with RDLS-8..D M12 connector to 3 m wires, cut to length
www.bannerengineering.com/eu 9
EZ-SCREEN Standard
Type 4, Cat 4 PLe, SIL 3, SIL CL 3 – Finger, hand and ankle detection
2 PNP Safety Outputs (OSSD) and 1 auxiliary output, 24 VDC power supply
Models with 300 mm M12 pigtail QD also available. Emitter models with TEST function also available.
10
Cordsets Splitter Cordsets
8-pin M12 QD
Length 8-pin M12 QD (A) Trunk Length
Splitter (B)
8-pin M12 QD
Length
Double-Ended (C)
0.3 m DEE2R-81D
0.9 m DEE2R-83D
2.4 m DEE2R-88D C
4.6 m DEE2R-815D
B
8m DEE2R-825D
15 m DEE2R-850D
A
23 m DEE2R-875D
30 m DEE2R-8100D
Other hookup schemes are possible: cordset A can be used
individually for the E/R hookup, without splitter cables.
Interface Modules
Model
Output Output Rating
(24 VDC)
IM-T-9A 3 NO 6A
IM-T-11A 2 NO / 1 NC 6A
Brackets
EZA-MBK-11* EZA-MBK-12* EZA-MBK-20 EZA-MBK-21**
www.bannerengineering.com/eu 11
EZ-SCREEN LP (Low Profile)
Type 4, Cat 4 PLe, SIL 3, SIL CL 3
2 PNP Safety Outputs (OSSD) and 1 auxiliary output, 24 VDC power supply
Housing
Defined Area Model Pair (E+R) Response Time Model Pair (E+R) Response Time
Length
Models with 8-pin M12 pigtail QD also available (add P88 to the above model pair).
Pigtail models come with DELPE-81D cordset pre-installed.
For 8-pin M12 QD cordsets, splitter cordsets and double-ended cordsets, see page 15.
Defined Housing
Model Pair (E+R) Response Time Model Pair (E+R) Response Time
Area Length
Models with 8-pin M12 pigtail QD also available (add P88 to the above model pair).
Pigtail models come with DELPE-81D cordset pre-installed.
For 8-pin M12 QD cordsets, splitter cordsets and double-ended cordsets, see page 15.
12
Cordsets Cordsets for Cascadables
8-wire RD RD to M12
Length Length RD to RD
(Removable disconnect) Female* QD
8m DELP-1125E /
15 m DELP-1150E /
Length 8-pin RD (male) to M12 QD
23 m DELP-1175E /
0.3 m DELPE-81D
30 m DELP-11100E /
0.9 m DELPE-83D
*Can be used with DEE2R-8..D
2.4 m DELPE-88D
4.6 m DELPE-815D
8m DELPE-825D
15 m DELPE-850D
23 m DELPE-875D
30 m DELPE-8100D
IM-T-9A 3 NO 6A
IM-T-11A 2 NO / 1 NC 6A
Brackets
LPA-MBK-11* LPA-MBK-12* LPA-MBK-20
LPA-MBK-135 LPA-MBK-180
www.bannerengineering.com/eu 13
EZ-SCREEN LPM (Low Profile with Muting)
Type 4, Cat 4 Ple, SIL 3, SIL CL 3 – Integral muting
2 PNP Safety Outputs (OSSD), 2 muting inputs, additional inputs for configuration of the muting function,
1 auxiliary output, 24 VDC power supply
Cordsets
A) Pre-installed DELPE-121E
3-Branch Muting Splitter Cordsets B) QDE-12..E
Sensor (PNP) C) DEE2R-8..D
(D)
see page 15
CSM3DO-M12121FM12121M DO (pin 2)
CSM3LO-M12121FM12121M LO (pin 4) A A
4-Branch (E)
Sensor (PNP)
(EZ-SCREEN LP Emitter Hookup)
CSM4DO-M12121FM12121M DO (pin 2)
C
CSM4LO-M12121FM12121M LO (pin 4)
D E
Muting Sensor Cordsets (F) Length
DEE2R-51D 0.3 m B
B
DEE2R-53D 0.9 m
DEE2R-58D 2.5 m
DEE2R-815D 4.6 m
F F
Other hookup schemes are possible
4: Green/Yellow/Red/
TL50GYRWQ DELPEF-50D Multicolour cordset, 5 cm
White
14
EZ-SCREEN Type 2
Type 2, Cat 2 PLc – Hand and ankle detection suited to lower risk applications
2 PNP Safety Outputs (OSSD), 24 VDC power supply
Defined Area Housing Length Response Time Automatic Restart – Trip Manual Restart – Latch
Cordsets Brackets
Length 8-pin M12 QD USMB-1* USCMB-.
15 m QDE-850D
23 m QDE-875D
30 m QDE-8100D
Flanges in Flanges out
8-pin M12 QD
Length
Double-Ended
0.3 m DEE2R-81D
0.9 m DEE2R-83D
2.4 m DEE2R-88D
4.6 m DEE2R-815D
8m DEE2R-825D
USMB-6 USMB-8
15 m DEE2R-850D
23 m DEE2R-875D
30 m DEE2R-8100D
8-pin M12 QD
Trunk Length
Splitter
Flanges in Flanges out
No branches, no trunk CSB-M1280M1280
0.3 m CSB-M1281M1281
2.5 m CSB-M1288M1281
4.6 m CSB-M12815M1281
7.6 m CSB-M12825M1281
www.bannerengineering.com/eu 15
AG4 Safety Laser Scanner
Type 3, Cat 3 PLd, SIL 2, SIL CL 2 – Stationary and mobile applications
2 PNP Safety Outputs (OSSD), 2 PNP auxiliary outputs, 24 VDC power supply
Maximum Protective
Model Resolution Protective Fields
Range
AG4-4E 30 mm 1.6 m
AG4-4E 40 mm 2.2 m
4m
AG4-4E 50 mm 2.8 m (maximum warning range
15 m)
AG4-4E 70 mm 4.0 m
AG4-6E 30 mm 1.6 m
AG4-6E 40 mm 2.2 m
6.25 m
AG4-6E 50 mm 2.8 m (maximum warning range
15 m)
AG4-6E 70 mm 6.25 m
Includes scanner, plugs and CD with diagnostic and configuration software, cordset ordered separately
Cordsets Brackets
Length DB15 Machine Interface AG4-MBK1 Adjustable mounting bracket
5.00 m AG4-CPD15-5
10.0 m AG4-CPD15-10
25.0 m AG4-CPD15-25
50.0 m AG4-CPD15-50
3.00 m AG4-PCD9-3
5.00 m AG4-PCD9-5
10.0 m AG4-PCD9-10
1.00 m AG4-PCD9USB-1
Output AG4-TB1
Model Output
Rating
UM-FA-9A 3 NO 6A
UM-FA-11A 2 NO / 1 NC 7A
16
STB Self-Checking Touch Buttons
Touch Surface
Model Connection Output Power Supply
Material
2m MQDC-406 MQDC-406RA
9m MQDC-430 MQDC-430RA
15 m MQDC-450 MQDC-450RA
2m MQDC1-506 MQDC1-506RA
5m MQDC1-515 MQDC1-515RA
9m MQDC1-530 MQDC1-530RA
STBVP6-RB2
STBVP6-R Terminal strip Not included
STBVP6-R
STBVP6-RB2Q8 8-pin 7/8 QD Not included
STBVP6-R
STBVP6-RB2E02 Terminal strip SSA-EBM-02L
STBA-RB
STBA-RB2-S1 (floor mounted) STBA-RB2-S2 (free standing)
4.5 m QDS-815C
8m QDS-825C
15 m QDS-850C
23 m QDS-875C
www.bannerengineering.com/eu 17
E-Stop Buttons
30 mm Mount Electro-Mechanical E-Stop Push Button, IP65 rating
AB/Rockwell® and Siemens® Safety BUS node compatible models also available
Cordsets
A) Double-ended M12
5* 0.3 m DEE2R-51D
8 0.3 m DEE2R-81D
5* 2.5 m DEE2R-58D
8 2.5 m DEE2R-88D
4 0.3 m CSS-M12F41M12M41M12F41
8 0.3 m CSS-M12F81M12M81M12F81
4 2.5 m CSS-M12F48M12M41M12F41
A
8 2.5 m CSS-M12F88M12M81M12F81
4 2m MQDC-406
4 4.6 m MQDC-415
8 2m MQDC2S-806
*Use also with 4-pin E-Stop buttons.
8 4.6 m MQDC2S-815 Other hookup schemes are possible. More lengths available.
18
2-Hand-Control Modules
DUO-TOUCH SG Two-Hand Control Modules
2 NO Safety Outputs, 24 VAC/DC power supply, IP20 rating, meets Cat 4 and Type IIIC
*May also use 2 mechanical push buttons, each with 1 NO and 1 NC contact
STB Buttons
Kit Module IP Rating IP Rating Connection
(2 pieces)
ED1G-L20MB-1N 2 NO 2 NO
Also available:
E-Stop Modules, Muting Modules and Safe Speed Modules
• E-Stop and interlocked guard modules monitor contact failure or wiring fault
• Muting modules suspend safeguarding during hazard-free times in the machine’s
cycle and allow material to move into or from the process, without tripping the
primary safeguard
• Safe speed monitoring modules monitor two sensors with PNP outputs for
rotation and linear movements. They allow safety switches to release and safety
gates to be opened when the speed drops below the dangerous level.
Interlocking Switches
www.bannerengineering.com/eu 19
Lighting & Wireless Machine
Sensors Vision Indication I/O Safety
USA
EU JP
CN
TW
MX
TR
BR IN
Banner Engineering EMEA | Diegem, Belgium | Phone +32 2 456 07 80 | mail@bannerengineering.com | www.
bannerengineering.com/eu — Banner Engineering (HQ) | Minneapolis, MN, USA | Phone: +1 763 544 3164 |
www.bannerengineering.com — Banner Engineering Turkey | Batı Ataşehir, Istanbul | Phone: +90 216 688 8282
| turkey@bannerengineering.com.tr | www.bannerengineering.com.tr — Banner Engineering India | Pune | Phone:
+91 20 664 056 24 | salesindia@bannerengineering.com | www.bannerengineering.co.in — Banner Engineering
do Brasil | Jundiaí − SP | Phone: +55 11 2709 9880 | brasil@bannerengineering.com | www.bannerengineering.
com.br — Banner Engineering de Mexico | Monterrey | Phone: +52 81 8363 2714 | mexico@bannerengineering.
com | www.bannerengineering.com.mx — Banner Engineering China | Shanghai | Phone: +86 21 24 22 68 88 |
sensors@bannerengineering.com.cn | www.bannerengineering.com.cn — Banner Engineering Japan | Osaka |
Phone: +81 6 6309 0411 | mail@bannerengineering.co.jp | www.bannerengineering.co.jp — Banner Engineering
Taiwan | Taipei | Phone: +886 2 8751 9966 | info@bannerengineering.com.tw | www.bannerengineering.com.tw
www.bannerengineering.com/eu