Академический Документы
Профессиональный Документы
Культура Документы
30m
80m
Area: 2040m2
Can fit up to 400 x C20TS12
42.5MW = $9.8mil
$0.23/W
http://www.mccullough.com.au/wp-content/uploads/2017/07/Renewable-energy-in-Australia-
Part-3_Funding-and-investment_FINAL.pdf
Questions that should be addressed as part of your report:
1. How does the amount of renewable energy supplied vary as the collector area is varied from
20% to 200% of the pool area?
196kW
Fraction of the heat load of the pool = 419kW × 100 = 46.8%
My understandings: fraction = 51.4%
3. With the above cost structure assess the viability of the system with natural gas prices of
$5, $10, $15 and $20 per GJ. (assume an energy content of natural gas of 40MJ/m 3). Do
you think such a project would be economically viable on the basis of your analysis?
5$ 40𝑀𝐽 0.2$
× = 3
1000𝑀𝐽 𝑚3 𝑚
𝑁𝑎𝑡𝑢𝑟𝑎𝑙 𝑔𝑎𝑠 𝑒𝑛𝑒𝑟𝑔𝑦 𝑐𝑜𝑛𝑡𝑒𝑛𝑡 = 40𝑀𝐽/𝑚3
10$ 40𝑀𝐽 0.4$
× = 3
1000𝑀𝐽 𝑚3 𝑚
15$ 40𝑀𝐽 0.6$
× = 3
1000𝑀𝐽 𝑚3 𝑚
20$ 40𝑀𝐽 0.8$
× = 3
1000𝑀𝐽 𝑚3 𝑚
4. Include a GHG emissions reduction analysis in your investigation. What is the net GHG
emissions reduction in your study? What assumptions did you make in deriving this
answer?
Assumptions
Also includes e
base/proposed
($0.8 /m3)
5. How sensitive is your answer to the collector loss coefficient used? (ie vary the collector
parameter by a certain percentage and get the percentage change in the overall result)