Академический Документы
Профессиональный Документы
Культура Документы
Rig No: DS 6 Procedure No: DS6-WI- Revision No: 0 Date: DEC 19, 2011
CAR-009
Issued by OIM: Approved by Rig Manager:
Job Description: Working with knifes
Summary: (Brief description of procedure): Safe knife handling
Detailed Procedure (develop step by step instructions on how to do the job including the Safety, Health
& Environmental Considerations & Possible Hazards):
Sequence of Job Steps Hazards/Potential Risks (Energy Sources)
1) Hold a JSA meeting with all personnel involved in the
job. Ask “open-ended” questions that encourage input
and participation and managed the potential hazards
identified in this WI and potential unsafe acts /
conditions that are not already identified in the WI
2) Put on latex gloves on both hands. Place cutting glove Cutting your hand
on the hand that is not holding the knife and then
cover the glove with a latex glove
3) Place item to be cut on the approve cutting board for Cutting yourself when removing the cut item off the cutting
cutting. Hold the knife firmly when using so it does board.
not slip when in use. Cutting awayfrom you. After
completing needed cuts of item place the knife on its
side in front of you turned away.
4) Remove knife from area after completed cutting of Prevents others from becoming cut by knife when knife is
product. Hand wash with soap and water and return not in use
knife to its approved holding area for use later
5) After knife has been cleaned and placed back into its Prevents cross contamination of knife and product being
approved holding area then remove all gloves and prepaired
wash hands.