Академический Документы
Профессиональный Документы
Культура Документы
ACCESSORY SPECIFICATIONS
Table of Contents
Part Assembled Accessories Page Part Stock Accessories Page
- Table of Contents 03 45 Flanges (Threaded Raised) 29
- Corrugated Flex Specifications 04 46 Flanges (Reducing/Increasing: Pipe & Tube) 29
10 Corrugated Flex Connectors 05-08 - Gasket Specifications 30
- Expansion Joint / Bellows Specifications 09 47 Nut Bolt Gasket Kits 31
11 Expansion Joint / Bellows 10-13 48 Gaskets 32
13 Wyes (Cummins) 14 49 Tube Fittings (Cuffed One End) 33
14 Wyes (MTU/Detroit) 15 50 Tube Fittings (Cuffed Both Ends) 33
15 Wyes (Caterpillar) 16 51 Tube Fittings (Reducer/Expanders) 33-34
20-A Thimbles (Combustible Walls Only) 17 52 Tube Fittings (Tube Connectors/Stack Breakers) 34
20-B Thimbles (Roof & Non-Combustible Walls) 17 53 90° Tube Elbows (Long Rad.: Cuffed One End) 35
21 Roof Jacks 18 54 90° Tube Elbows (Long Rad.: OD Tube Ends) 35
22 Rain Caps 19-20 55 90° Tube Elbows (Short Rad.: Tangent Cut) 35
23 90° Tube Elbows (Short Rad.: Flanged One End) 21 55-M 90° Mitred Elbows 35
24 90° Mitred Elbows (Short Rad.: Flanged One End) 21 56 90° Tube Elbows (Short Rad.: Cuffed One End) 36
25 Outlet Extensions (Tube: Flanged One End) 22 57 90° Tube Elbows (Short Rad.: OD Tube Ends) 36
25 Outlet Extensions (Tube: 45° w/ Bird Screen) 22 58 45° Tube Elbows (Long Rad.: Cuffed One End) 36
25 Outlet Extensions (Tube: Flanged Both Ends) 23 59 45° Tube Elbows (Long Rad.: OD Tube Both Ends) 36
26 90° Tube Elbows (Short Rad.: Flanged Both Ends) 23 60 45° Tube Elbows (Short Rad.: Cuffed One End) 37
26-M 90° Mitred Elbows (Short Rad.: Flanged Both Ends) 23 61 45° Tube Elbows (Short Rad.: OD Tube Both Ends) 37
62 45° Tube Elbows (Short Rad.: Tangent Cuts) 37
63 Stainless Steel Flex Hose (Interlocking) 38
64 Tubing 38
65 Stainless Steel Flex Hose (Corrugated) 38
Part Stock Accessories Page 67 Cones 39
27 Pipe Hangers 24 80-81 Rain Guards 40
28 Brackets 25 82 Drain Cocks 40
31 Clamps (Circle) 26 - Velcro Wrap Specifications 41
32 Clamps (Round Bolt) 26 103 Velcro Wrap (Tubing) 42
33 Clamps (TruSeal) 26 104 Velcro Wrap (Flex & Bellows) 42
35 Clamps (V-Band) 26 105 Velcro Wrap (Elbows) 43
36 Flanges (Flared) 27 106 Velcro Wrap (Flange) 44
37 Flanges (Machined Turbo) 27
38-40 Flanges (Engine) 27 Appendix Page
41 Flanges (ANSI) 28 Appdx. A Accessory Catalog Revisions 45
Nominal Hose ID (in.) Nominal Hose OD (in.) Max Lateral Offset / Max Axial Movement / Max Operating
Foot Foot Temperature (°F)
2 2.75 0.96 0.14 1500°
2.5 3.17 0.82 0.22 1500°
3 3.75 0.74 0.22 1500°
4 4.82 0.60 0.22 1500°
5 5.87 0.47 0.22 1500°
6 6.94 0.42 0.22 1500°
8 9 0.30 0.22 1500°
10 11 0.20 0.22 1500°
12 13 0.17 0.22 1500°
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Flex is 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
C D
Slotted ID Cuff / Female Half Coupling
PPC4
Part Number A B WT
10-43-218 2 18 5 B
10-43-2518 2.5 18 6
10-43-318 3 18 6
10-43-3518 3.5 18 8 A
10-43-418 4 18 9
All dimensions are in inches. All weights are in pounds. Weights are approximate. Other sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Flex is 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
B
D
A
A
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Flex is 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
A
C
B
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Flex is 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
All dimensions are in inches. Other sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Bellows are 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
Bellows flow liners are recommended for exhaust 6” and below when gas/stream flow conditions are greater than or equal to 4 feet / second / inch of diameter.
Bellows flow liners are recommended for exhaust 8” and above when gas/stream flow conditions are greater than or equal to 25 feet / second.
All dimensions are in inches. Larger sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Bellows are 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
Bellows flow liners are recommended for exhaust 6” and below when gas/stream flow conditions are greater than or equal to 4 feet / second / inch of diameter.
Bellows flow liners are recommended for exhaust 8” and above when gas/stream flow conditions are greater than or equal to 25 feet / second.
C D
B
A
All dimensions are in inches. Larger sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Bellows are 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
Bellows flow liners are recommended for exhaust 6” and below when gas/stream flow conditions are greater than or equal to 4 feet / second / inch of diameter.
Bellows flow liners are recommended for exhaust 8” and above when gas/stream flow conditions are greater than or equal to 25 feet / second.
A
B
C
B
C
All dimensions are in inches. Larger sizes available. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
Bellows are 321 stainless steel. End connections are carbon steel. Connections available in stainless steel. Call factory for details.
Bellows flow liners are recommended for exhaust 6” and below when gas/stream flow conditions are greater than or equal to 4 feet / second / inch of diameter.
Bellows flow liners are recommended for exhaust 8” and above when gas/stream flow conditions are greater than or equal to 25 feet / second.
Cummins QST 30
PPC7
Part Number Gen Set Model Size WT
13-34296 DQFAA 750 6 X 6 X 10 57
13-34296 DQFAB 800 6 X 6 X 10 57
13-33671 DQFAC 900 6 X 6 X 12 69
13-37290 DQFAD 1000 6 X 6 X 14 75
Floating Cummins flanged inlets. Floating ANSI flanged outlet.
Cummins QSK 50
PPC7
Part Number Gen Set Model Size WT
13-37291 DQKAA 1250 6 X 6 X 12 72
13-36209 DQKAB 1250 6 X 6 X 14 78
13-36209 DQKAB 1500 6 X 6 X 14 78
13-39349 DQKAB 1500 8 X 8 X 14 91
Floating Cummins flanged inlets. Floating ANSI flanged outlet.
Cummins QSK 60
PPC7
Part Number Gen Set Model Size WT
13-37294 DQKAA 1750 10 X 10 X 14 157
13-37295 DQKAA 1750 10 X 10 X 16 162
13-37295 DQKAB 2000 10 X 10 X 16 162
13-37296 DQKAB 2000 10 X 10 X 18 163
13-37297 DQKAB 2000 10 X 10 X 20 176
13-14913 DQKH 2250 10 X 10 X 18 163
13-37645 DQKH 2250 10 X 10 X 20 176
Floating ANSI flanged inlets and outlet, unless otherwise noted.
Cummins QSK 78
PPC7
Part Number Gen Set Model Size WT
13-22527 DQLA 2700 & DQLC 2500 12 X 12 X 18 187
13-23243 DQLA 2700 & DQLC 2500 12 X 12 X 20 203
13-23260 DQLA 2700 & DQLC 2500 12 X 12 X 22 212
13-23261 DQLA 2700 & DQLC 2500 12 X 12 X 24 226
Floating ANSI flanged inlets. Floating ANSI flanged outlet.
20-A-238 2.38 14 53
20-A-250 2.5 14 53
20-A-400 4 16 66
20-A-450 4.5 16 68
20-A-500 5 17 88
20-A-556 5.56 17 90
Exhaust Tube/Pipe
A
20-A-600 6 18 98 Pest Control Screen
(Not Included)
20-A-663 6.63 18 100
20-A-800 8 20 114
20-A-1600 16 28 175
20-A-1800 18 30 218
Inner Square
Type B Roof & Non-Combustible Walls
Flashing (Shipped Loose)
Part Number A B WT
20-B-200 2 9 38
20-B-288 2.88 10 43
B
20-B-300 3 10 43
20-B-350 3.5 10 44
20-B-400 4 11 46
All dimensions are in inches. All weights are in pounds. Weights are approximate. Carbon steel construction. Available in stainless steel. Call factory for details.
When calculating height thimble must have a 9” clearance on each side of the wall or roof. To prevent warping, outer flashing is not welded 100%.
Be sure to include correct roof pitch on all roof applications. There is an additional charge for non-flat roof applications.
Conforms to NFPA 37 and 110. The above thimbles have been sized for standard (8”) thick walls and roofs.
Thermal barrier used within the thimbles is composed of high density, type “E” fibers, fibrous glass heavy-duty insulation. Apply high-temp Mil-A-46106B 100 Series Silicon RTV where needed.
Pest Control Screen adds 2”-3” to exterior height. Consult GT for specifics.
All Thimbles will come with High Heat Black Paint standard.
For further information on quotes, please contact GT Exhaust
quotes@gtexhaust.com
1.888.894.3726
17 Ref.#: PSC-201209-ACC-03 17
21 - ROOF JACKS
Roof Jacks
Rainguards Cuffed
PPC8
Part Number A B C
21-C-400 4 5 15 C
CLAMP (INCLUDED)
21-C-450 4.5 5.5 15
21-C-500 5 6 15
RAINGUARD (INCLUDED)
21-C-556 5.56 6.5 15
21-C-600 6 7 15
7.00
21-C-663 6.63 7.8 15 STD
B EXHAUST TUBE/PIPE
21-C-800 8 9 18 A (Not Included)
Rainguards Flanged
PPC8
Part Number A B C
21-F-400 4 5 15 C
21-F-450 4.5 5.5 15 A RAINGUARD (INCLUDED)
21-F-500 5 6 15
21-F-556 5.56 6.5 15
21-F-600 6 7 15
3.00 B EXHAUST TUBE/PIPE
21-F-663 6.63 7.8 15 STD WITH ANSI FLANGE
(Not Included)
21-F-800 8 9 18
Outer Round Flashing
21-F-863 8.63 9.8 18 (Welded)
21-F-1000 10 11 20
ENGINE ENCLOSURE
21-F-1075 10.75 12 20 ROOF
21-F-1200 12 13 24
21-F-1275 12.75 14 24 INNER ROUND FLASHING
(LOOSE)
Roof jacks are designed for non-combustible
metal enclosures only.
CAUTION: Roof jacks are designed for non-combustible metal enclosures only. Avoid potential fire hazard. Product should never be exposed to
combustible material. DO NOT USE if combustible materials are present. Refer to Wall and Roof Thimbles (page 17) for applications where combus-
tible materials will come in contact with the product.
All dimensions are in inches. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Other sizes available. Call factory for details.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Other sizes available. Call factory for details.
23-1200 12 12 16 -
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
Connection(s) are ANSI steel plate flanges unless otherwise specified.
All dimensions are in inches. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
Connection(s) are ANSI steel plate flanges unless otherwise specified.
See price sheet for optional lengths.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
Connection(s) are ANSI steel plate flanges unless otherwise specified.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
**28 Series Brackets are not to be used for vertical installations. For vertical applications,
GT Exhaust reccomends the installation of 29 Series Brackets (found in the Silencer Catalog).
All dimensions are in inches. Larger sizes available. Call factory for details. Stainless steel available.
Flared
PPC12
Part Number Inner Dia Outer Dia Length V-Band Clamp
36-JD-250 2.5 3.13 3 35-JD-250
L
36-300 3 3.63 1.5 Call Factory
36-350 3.5 4.25 1.5 Call Factory
36-JD-400 3.9 4.41 3 35-JD-400
36-400 4 4.63 1.5 35-400 ID OD
A B
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
† 37-450 used on the following engines: Airesearch TV801,T1885, T18A40,All Schwitzer, DDA Turbo, and Cummins K.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
45-600 6 9.5
45-800 8 11.75
NPT Standard Pipe Threads.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
Recovery @ 34.5 MPa (5000 psi) 30% Min 34% ASTM F-806
Air Aging 70 hrs @ 540° C (1000° F) Thickness Loss 0-10% 6% ASTM D-573
Air Aging 70 hrs @ 540° C (1000° F) Weight Loss 20% Max 11%
Fluid Resistance ASTM IRM903 Oil - Weight Change 70% ▲ Max. 58% ASTM F-146
Fluid Resistance ASTM Fuel B - Thickness Change 10-20% 15% ASTM F-146
Fluid Resistance ASTM Fuel B - Weight Change 50% ▲ Max. 45% ASTM F-146
GT Fiber full face gaskets use a 0.008” ETP (electrolytic tin plate) low carbon steel core. The core is then laminated on two sides with a facing composed of heat resistant vermiculite and ceramic
fibers chemically bonded with an NBR binder. This gasket is designed for hot gas applications where extreme heat is present. The fiber facings are mechanically bonded without the use of any adhesives,
providing stability and integrity even when exposed to high heat, scrubbing, and vibration. Gasket is asbestos-free. Its color is light brown.
47-FF-200 2 .62 2 4 1
47-FF-250 2.5 .62 2 4 1
47-FF-300 3 .62 2 4 1
47-FF-350 3.5 .62 2 8 1
47-FF-400 4 .62 2 8 1
47-FF-500 5 .75 2 8 1
47-FF-600 6 .75 2 8 1
47-FF-800 8 .75 2 8 1
47-FF-1000 10 .88 2.5 12 1
47-FF-1200 12 .88 2.5 12 1
47-FF-1400 14 1.0 2.5 12 1
47-FF-1600 16 1.0 2.5 16 1
47-FF-1800 18 1.13 3 16 1
47-FF-2000 20 1.13 3 20 1
47-FF-2200 22 1.25 3 20 1
47-FF-2400 24 1.25 3 20 1
47-FF-2600 26 1.25 3 24 1
47-FF-2800 28 1.25 3 28 1
47-FF-3000 30 1.25 3 28 1
47-FF-3400 34 1.50 3.75 32 1
47-FF-3600 36 1.50 3.75 32 1
Grade 2 Zinc plated nuts/bolts. Available in 304 and 316 stainless steel consult factory for details.
Fiber gasket rated up to 1,800° F for continuous use, 2,300° F maximum temperature.
Sizes 26” and up gaskets will come in two pieces.
All dimensions are in inches. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
31 Ref.#: PSC-201209-ACC-03
31
48 - GASKETS
Fiber Full Face Gaskets
All dimensions are in inches. Larger sizes available. Call factory for details.
L L
Reducer / Expander Style 2
PPC17
Part Number Tube Size L WT Part Number Tube Size L WT
51-2-225-2 2 X 2.25 6 .67 51-35-450-2 3.5 X 4.5 7 1.49 OD ID ID
L L
51-2-250-2 2 X 2.5 6 .71 51-35-500-2 3.5 X 5 8 1.64
STYLE 3 STYLE
51-25-300-2 2.5 X 3 6 .85 51-4-450-2 4 X 4.5 6.5 1.50
51-3-350-2 3 X 3.5 6 1.00 51-4-500-2 4X5
OD 8 1.88
OD OD ID
51-3-400-2 3X4 6.5 1.28 51-5-550-2 5 X 5.5 6.5 1.90
51-35-400-2 3.5 X 4 6 1.17 51-5-600-2 5X6 8 2.46
STYLE 1 STYLE 2
L L
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
OD ID ID ID
STYLE 3 STYLE 4
OD OD OD ID
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in 304 stainless steel. Call factory for details.
Size 2.75” elbows are non-stock items. Call factory for details.
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in 304 stainless steel. Call factory for details.
Size 2.75” elbows are non-stock items. Call factory for details.
OD
64-200 2 .065 1.3 64-1000 10 .104 14.3
64-225 2.25 .065 1.5 64-1200 12 .104 15
64-250 2.5 .065 1.7 64-1400 14 .104 16.2
64-275 2.75 .065 1.9 64-1600 16 .104 18.5
64-300 3 .065 2 64-1800 18 .1345 Call
64-350 3.5 .065 2.4 64-2000 20 .1345 Call
64-400 4 .065 2.7 64-2200 22 .1345 Call
LENGTH
64-450 4.5 .065 3.1 64-2400 24 .1345 Call
64-500 5 .065 3.4 64-2600 26 .1345 Call
64-550 5.5 .065 3.4 64-2800 28 .1345 Call
64-600 6 .083 5 64-3000 30 .1345 Call
All dimensions are in inches. All weights are in pounds. Weights are approximate. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
No Flanges
PPC21
Part Number A B C
67-00-6080 6 8 9.5
67-00-6010 6 10 11.5
67-00-8010 8 10 11.5
67-00-8012 8 12 11.5
67-00-1012 10 12 11.5
C
67-00-1014 10 14 11.5
67-00-1214 12 14 11.5
67-00-1216 12 16 11.5
67-00-1416 14 16 13.5
67-00-1418 14 18 13.5
67-00-1618 16 18 15.5 A B
67-00-1620 16 20 15.5
67-00-1820 18 20 15.5
67-00-1822 18 22 15.5
67-00-2022 20 22 15.5
67-00-2024 20 24 15.5
67-00-2224 22 24 15.5
67-00-2226 22 26 15.5
Flanged Both Ends
PPC21
Part Number A B C
67-11-6080 6 8 10
67-11-6010 6 10 12
67-11-8010 8 10 12
67-11-8012 8 12 12
67-11-1012 10 12 12
67-11-1014 10 14 12 C
67-11-1214 12 14 12
67-11-1216 12 16 12
67-11-1416 14 16 14
67-11-1418 14 18 14
67-11-1618 16 18 16
A B
67-11-1620 16 20 16
67-11-1820 18 20 16
67-11-1822 18 22 16
67-11-2022 20 22 16
67-11-2024 20 24 16
67-11-2224 22 24 16
67-11-2226 22 26 16
All dimensions are in inches. Larger sizes available. Call factory for details.
Available in stainless steel. Call factory for details.
All ANSI flanges may be replaced with a standard Caterpillar, Cummins, or MTU engine flanges.
80-600 6 15 4 .083
THK
80-800 8 18 4 .083
A
80-1000 10 20 4 .083
80-1200 12 24 4 .083
80-1400 14 24 4 .083
Drain Cocks
PPC22
Part Number Port Pipe Size
82-0500 Full 0.50
82-0750 Standard 0.75
82-0100 Standard 1.00
NPT NIPPLE ADAPTER
82-0150 Standard 1.50
Bronze ball valve (union x NPT female). Ball is chrome plated brass.
Latch lock handle allows padlock.
Includes 4” long NPT male nipple adapter.
Custom Designed Flexible, Removable Insulation Blankets Temperature Rating: 1200° F (649° C)
Properties
Temperature Range 20° F - 1100° F process temperatures
Insulation 1” thick, 9 lb. density insulation composed of 100% Type “E” fibers
Attachments High-temp Velcro strips and belts with stainless steel double D-Rings
Physical Properties
Surface Temperature Used on surfaces up to 1100° F
300° F 0.40
500° F 0.50
700° F 0.65
Specification Compliance
MIL-1-24244
NRC-136
Thermal wrap provides a tough, durable exterior that can be custom fitted for nearly any product or accessory. The wrap is composed of 1” thick, 9 pound insulation composed of 100% Type “E”
fibers, fabricated in a mat form free of asbestos. The wrap is easy to install, and significantly reduces surface temperature. Its color is gray.
Tubing Wrap
PPC22
Part Number Tube/Pipe Size Application Part Number Tube/Pipe Size Application
103-300-WV 3 Tube 103-1200-WV 12 Tube
103-350-WV 3.5 Tube & 3” Pipe 103-1275-WV 12.75 Pipe
103-400-WV 4 Tube & 3.5” Pipe 103-1400-WV 14 Pipe
103-450-WV 4.5 Pipe 103-1600-WV 16 Pipe
103-500-WV 5 Tube 103-1800-WV 18 Pipe
103-556-WV 5.56 Pipe 103-2000-WV 20 Pipe
103-600-WV 6 Tube 103-2200-WV 22 Pipe
103-663-WV 6.63 Pipe 103-2400-WV 24 Pipe
103-800-WV 8 Tube 103-2600-WV 26 Pipe
103-863-WV 8.63 Pipe 103-2800-WV 28 Pipe
103-1000-WV 10 Tube 103-3000-WV 30 Pipe
103-1075-WV 10.75 Pipe 103-3600-WV 36 Pipe
Flex Wrap
PPC22
Part Number Size ID Part Number Size ID
104-F-300-WV 3 104-F-600-WV 6 -
Bellows Wrap
PPC23
Part Number Size ID Part Number Size ID
104-B-300-WV 3 104-B-1600-WV 16
104-B-350-WV 3.5 104-B-1800-WV 18
104-B-400-WV 4 104-B-2000-WV 20
104-B-500-WV 5 104-B-2200-WV 22
104-B-600-WV 6 104-B-2400-WV 24
104-B-800-WV 8 104-B-2600-WV 26
104-B-1000-WV 10 104-B-2800-WV 28
104-B-1200-WV 12 104-B-3000-WV 30
104-B-1400-WV 14 104-B-3600-WV 36
All dimensions are in inches. Larger sizes available. Call factory for details.
All dimensions are in inches. Larger sizes available. Call factory for details.
All Elbow wraps are for tangent cut elbows. Consult factor for elbow wraps with extended legs.
All dimensions are in inches. Larger sizes available. Call factory for details.