Академический Документы
Профессиональный Документы
Культура Документы
How To Do Po
Tuesday, March 28, 2017 Blog Archive
▼ 2017 (1)
How To Enable LAN Port on PLDT Fibr Modem Po?
▼ March (1)
1. Make sure you're connected to the network via wifi or LAN (use LAN Port #1). How To Enable LAN Port
2. Open your browser and enter 192.168.1.1 in the address bar. on PLDT Fibr Modem
Po?
Note: You might be asked to nominate a new password and wifi name, make sure you
write it down for future reference.
4. Click the Network tab then click the Broadband Settings on the left side navigation.
5. Under Lan Binding, make sure to check the LAN 2, LAN 3 and LAN 4 check boxes.
6. Click the Apply button in the buttom of the page to save the changes.
24 comments:
Hi, this did not work for me, well.. it technically did, since the UN and PW wasn't that.. it was
username: admin
password: 1234
for me. Anyway, my problem is, when I click the Network tab, There aren't any options to
choose. Broadband settings and Lan Binding wasn't in the list. The only tab available was
WLAN Settings. Can you assist me with this one?
Reply
Replies
"admin" as username is not the administrator account of your router. That's why
the options you can see are limited. What's the model of your wifi router?
help me too AN5506-04-FA cant enter the said password user just the limited
function admin 1234 account
@kaiencross
Same problem with me, I can't find any broadband settings :( How to fix this?
step 1. log in
username admin
pass 1234
step 2. Copy paste this to your browser
"http://192.168.1.1/internet/wan_sfu.asp"
step 3. in the LAN Binding, Check the boxes...
LAN 2, LAN 3 AND LAN 4
step 4. click "Apply" at the very bottom of the page
Reply
With a recent update to PLDT FIBR units, you need to disconnect the fibre connector
(carefully and remember the direction of the plug), and reboot your router before you can
access 192.168.1.1
Reply
Login using 'admin' as your username and 1234 as your password (default).
Reply
Replies
SALAMAAAAAAAAAAAAAAAT!!!!
malaking tulong po sana ito, kaso hindi ako na route sa adminpldt account
permissions :(( please help
Reply
Reply
whooooo thanks...
Reply
Publish Preview
Home