Академический Документы
Профессиональный Документы
Культура Документы
Gallant
handling
HP/HT drilling
Maersk Drilling Mærsk Gallant
Mærsk
Gallant
TYPE The Mærsk Gallant is one of the ultra harsh environment
MSC CJ62-120S, Ultra harsh environment jack-up drilling rig jack-ups in Maersk Drilling’s fleet.
Main advantages
• 120 – 125 m water depth year-round in the North Sea • Computerised drilling systems
• Fully equipped for HP/HT operations • 18 ¾” 15,000 psi BOP system
• 5,035 bbl dual mud system with dedicated oilbase storage • Unmanned engine room
tanks
• Cuttings slurrification and reinjection system
• Driller’s cabin, fully enclosed, touchscreen and joystick
controls
Maersk Drilling Mærsk Gallant
Main particulars
Key features
DRAWWORKS TENSIONER SYSTEM
Continental Emsco C-3 Type II, 3,000 hp. Conductor tensioning system consisting of 4 x 60 t hydraulic
cylinders. BOP handling system consisting of 4 x 45 t air-
TRAVELLING EQUIPMENT powered chain type trolley cranes.
Continental Emsco RA 60-7-750 travelling block, 750 t
capacity. DRILLING INSTRUMENTATION
HITEC/ABB 1000 drilling instrumentation with multi-
TOP DRIVE AND PIPE HANDLING parameter and alarm settings.
Varco TDS-6S with pipe handler and block retract system.
Varco PHM-3 pipe racking system with automatic POWER SUPPLY
fingerboards. Varco AR3200 integrated iron roughneck. 5 ea. Engines, Caterpillar 3516 DITA, air-start, diesel driven.
Varco fully interlocked zone management system (ZMS). Continuous output 1545 HP at 1200 RPM, maximum
output 1615 HP. Average fuel consumption 300 l/hr. Each
ROTARY TABLE is connected up to a AC Generator, Leroy Somer model LSA
Continental Emsco T4950-65 driven by Rexroth Mr-3600 52L9/6P. Output 1260 kW, 1800 KVA, 600 V, 60 Hz.
hydraulic motor. Opening 49 ½”.
1 ea Caterpillar 3516C-HD, continuous output 1880 HP at
MUD PUMPS 1200 RPM, driving Leroy somer generator type LSA 53 VS65-
Three Continental Emsco FC-2200, 2,200 hp, rated for 6P, 1800 KVA 1260 KW 600V 60Hz.
7,500 psi.
SCR SYSTEM
CEMENTING EQUIPMENT ABB SCR system.
Halliburton HCS-25D 15,000 psi wp. On free placement
agreement. CRANES
1 Liebherr BOS 2600-50 LITRONIC, 44,0 m (144 ft), 50 t
WELL CONTROL EQUIPMENT capasity and 15 t whipline, 1 Liebherr BOS 50/1100 crane,
NL Shaffer 18 ¾” 15,000 psi NXT BOP consisting of one 42,7 m (140 ft), 50 t capacity and 8 t whipline, and 1 Liebherr
annular + one double ram preventer + one single ram BOS 34/930 crane, 42,7 m (140 ft), 25,9 t capacity and 10 t
preventer. Vetco Gray diverter system type KFDJ 500 psi. whipline.
Main layouts
TOP VIEW AND DRILL FLOOR
K
RS NT
MÆ LLA
G A
TANK TOP
Maersk Drilling Mærsk Gallant
QUARTERS
SIDE VIEW
September 2015
Head office:
“DISCLAIMER: This brochure is for promotional purposes only. All descriptions, specifications and other information contained in this brochure and/or in any accompanying material is: (i) intended to give only a general indication of the sorts
of service or equipment or performance that might be available (ii) intended to be no more than an invitation to treat (iii) subject to contract and possible change or alteration at our discretion and without notice to you (iv) not to be relied
upon by you for any purposes whatsoever when entering into any legally binding agreement with us.”