0 оценок0% нашли этот документ полезным (0 голосов)
56 просмотров2 страницы
This document announces a one day workshop on 3D printing and cutting edge technology to be held on July 13th, 2018 at Government College of Engineering, Srirangam, Trichy. The workshop aims to cover the basics of 3D printing techniques, demonstrate cutting edge techniques, and evaluate additive technologies. Students and faculty from engineering colleges can register by July 9th and 40 participants will be selected on a first come first served basis. Lunch and snacks will be provided.
This document announces a one day workshop on 3D printing and cutting edge technology to be held on July 13th, 2018 at Government College of Engineering, Srirangam, Trichy. The workshop aims to cover the basics of 3D printing techniques, demonstrate cutting edge techniques, and evaluate additive technologies. Students and faculty from engineering colleges can register by July 9th and 40 participants will be selected on a first come first served basis. Lunch and snacks will be provided.
This document announces a one day workshop on 3D printing and cutting edge technology to be held on July 13th, 2018 at Government College of Engineering, Srirangam, Trichy. The workshop aims to cover the basics of 3D printing techniques, demonstrate cutting edge techniques, and evaluate additive technologies. Students and faculty from engineering colleges can register by July 9th and 40 participants will be selected on a first come first served basis. Lunch and snacks will be provided.
3-D PRINTING & CUTTING EDGE The information provided by me is TECHNOLOGY true to the best of my knowledge. I agree to 3-D PRINTING & CUTTING EDGE abide by the rules and regulations TECHNOLOGY 13th JULY, 2018 governing the workshop. If selected, I shall attend the training programme for the 13th JULY, 2018 REGISTRATION FORM entire duration. I also undertake the Name: responsibility to inform the co-ordinator in advance in case of inability to attend the DOB & Gender: programme. (For Students) Date : Year : Place : Branch : College: Signature of the Applicant
Phone : Forwarded/Recommended E-mail : Address for Communication:
Signature & Seal of the Sponsoring Organized by
(For Faculty) Authority Designation : Department of Electronics and Department : Communication Engineering, Qualification: Government College of Experience(in years) Address for Correspondence: Engineering, Srirangam, The Coordinator, Trichy – 620 012. Teaching: Industrial: 3-D Printing Workshop, Phone: Department of Electronics and E-mail: Communication Engineering, Government College of Engineering, Prof. K. BOMMARAJU College: Srirangam, Trichy-620012 AP& HOD/ECE Address for Communication: Email: hodece@gces.edu.in Coordinator Phone: 9944536426 ABOUT THE INSTITUTION: OBJECTIVE: ORGANIZING COMMITTEE: Government College of Engineering, The development of three-dimensional Srirangam, was started during the year 2013 and is printers is experiencing rapid growth, due to the PATRON located at Srirangam Constituency on a 13.2 acres spread of technology both in low-cost "consumer" Dr. V.M.SHANTHI site. This was the Tenth state owned Government PRINCIPAL and in value added applications for industrial use. GCE-SRIRANGAM Engineering College in Tamil Nadu. The campus has The scenarios opened to the evolution of this TRICHY-12 been registering steady progress from the academic technology are numerous, with impact both from year 2013 – 2014 and currently offers five UG RESOURCE PERSON Programmes in ECE, EEE, CSE, Mechanical and a point of view of the final consumer and Civil Engineering. The Teaching and learning industrial perspective. Dr.M.PRADEEP KUMAR process emphasizes equally on theoretical and Analysis of " best practices" for the design ASSOCIATE PROFESSOR practical aspects catering to the needs of Industries. of new products developed according to the ANNA UNIVERSITY The campus is situated at Trichy – Madurai National additive approach and development of tools for ChENNAI-25 Highways (NH 45B) Sethurappatti about 14 Kms the evaluation and choice of additive technologies CO-ORDINATOR from Tiruchirappalli Junction and about 6 Kms from rather than the traditional technology. Prof. K. BOMMARAJU Viralimalai Town. TOPICS TO BE COVERED: AP& HOD/ECE, Basics & Needs of 3D printing technology GCE-SRIRANGAM,TRICHY-12 ABOUT THE DEPARTMENT: 3D Printing techniques Department of Electronics and TECHNICAL SUPPORT Cutting Edge Techniques Prof. G.THIRUMALVALAVAN Communication Engineering was started in the year Demonstrations TECHKNOW LEADER, D15-10thE 2013. The department with its highly qualified CROSS,THILLAI NAGAR,TRICHY 18. infrastructure and modernized high tech laboratory ELGIBILTY: facilities strives to empower the students with the Any Engineering branch(UG/PG) Students P.KANAGARAJ LAB ASSISTANT theoretical and as well as the practical knowledge in Faculty members from Anna University ECE/GCE-SRIRANGAM all the domains in order to face the competitive TRICHY-12 Affiliated Engineering Colleges world with confidence, courage & success. Presently VENUE Department of ECE has a total strength of 152 REGISTRATION: students. The department has a team of highly Seminar Hall, Ground Floor, Faculty members/Students from Engineering qualified and dedicated faculty members. The Administrative Block, Colleges, University Departments, Affiliated / department has been conducting many workshops Autonomous Institutions Participants will be Government College of Engineering, and seminars for the welfare of the students & selected on First Come First Served basis Srirangam, Sethurappatti, faculties. The department has computing and Registration fee Rs 200/- for each participant. Trichy-12. interactive facility like smart class room. The number of participants is restricted to 40 only IMPORTANT DATE: Laboratories such as Electronics Lab, Embedded No TA/DA will be provided Submission of Application : 09.07.2018 Lab, Microprocessor Lab, VLSI Lab, DSP Lab and Lunch and snacks will be provided Intimation of Selection : 10.07.2018 Optical and Microwave Lab were established to cater Application may also be send through email. Confirmation by Participants : 11.07.2018 the needs of the aspiring students. Selected candidates will be intimated through email Email: hodece@gces.edu.in