Вы находитесь на странице: 1из 3

9900V

MICROCODE VERSION 21-14-17-00/00


RELEASED 01/06/06
Newly supported features and functions for Version 21-14-17-00/00

1. Common
NONE

2. Mainframe System
1-1 Support for Concatenation of FCv2 Source VOL and CC Primary VOL
Description It has been available to use the Concurrent Copy primary volume as the FCv2
source volume.
Supported emulation types: 3390-1, 3390-2, 3390-3/3R, 3390-9, 3390-L.
Changed DKCMAIN
Note Concatenated secondary Concurrent Copy volume not allowed with FCv2 volumes.

3. Open System
NONE

The change of contents for Version 21-14-17-00/00


(1) Timeout Error when Refreshing FCv2 Info Panel
Item Description
Contents When refreshing FCv2 Info panel on Storage Navigator during an initial copy of FCv2
relationship, "A timeout error occurred (7005.8000)", and panel failed to display. SSB=22be
(Correct History log start pointer) was output.
Conditions This problem occurs with all conditions met.
1. Performing pair operations by using one or more program products below:
Shadow Image, Shadow Image for z/OS, Compatible Mirroring for IBM Flash Copy, Cross
System Copy, or Volume Migration operation,
2. Performing a pair operation by using Compatible Mirroring for IBM Flash Copy Version 2
Category Flash Copy Version 2
Changed DKCMAIN

(2) SSB=9680 occurred in FCv2 Operation


Item Description
Contents SSB=9680 may occur right after PS/ON or when a relationship is established/deleted. If it does
not cause Job ABEND etc., it will not cause any problem.
Conditions This problem occurs with any of the following conditions met.
1. Right after PS/ON
2. A relationship is established.
3. Relationship deleted
Category Flash Copy Version 2
Changed DKCMAIN

HDS Confidential 1of 3


(3) Logical Inconsistency Error
Item Description
Contents Deleting FCv2 relationship by specifying TDEVN/DDSW (no), SSB=9681 occurred.
Conditions This problem may occur when you delete multiple relationships at a time. Since a retry is
successful, the problem does not cause any damage.
Category Flash Copy Version 2
Changed DKCMAIN

(4) Failed to Establish FCv2 Relationships


Item Description
Contents If establishing many relationships one after another, timeout occurs on host, and fail to establish.
Conditions This problem occurs when to many relationships are established in succession.
Category Flash Copy Version 2
Changed DKCMAIN

(5) SIM when Withdrawing FCv2 Relationships


Item Description
Contents When withdrawing FCv2 relationships, SIM=4b2X-YY occurred.
However, the relationships successfully withdrawn after hosts retry.
Conditions Issuing the Withdraw command with DDSW (NO) specified. However, since the problem
caused by the lock contention of control information, the chance of occurrence is low.
Category Flash Copy Version 2
Changed DKCMAIN

(6) FCv2 Pair Suspend


Item Description
Contents After having established one relationship for multiple datasets, when performing the SCRATCH
or INITIALIZE operation on the secondary volume, FCv2 pairs suspended with SIM reported.
Note After performing the following operations on the FCv2 secondary volume, relationship
establishing may fail. Therefore, after these operations, please use the FCWITHDR command to
withdraw the relationship or wait until the copy processing ends and the relationship released.
1. Scratch operation
2. Dataset deletion
3. Volume initialization
Category Flash Copy Version 2
Changed DKCMAIN

(7) FCv2 Pair Suspend when Performing INITIALIZE during Establishing


Item Description
Contents Establishing FCv2 relationships while program products FCv1 and FCv2 were available, FCv2
pairs suspend with SIM reported if Initialize operation of Shadow Image for z/OS performed.
Category Flash Copy Version 2
Changed DKCMAIN

(8) Head reliability improvement


Item Description
Contents Read error on ORM. The HDD program modified to set optimum head sense current on ORM.
Category HDD
Changed DKU Micro-Program

HDS Confidential 2of 3


(9) Relationship Withdraw Failure
Item Description
Contents When WCHK1 and CHK3 occurred due to a failure, relationships failed to be withdrawn.
However, the relationships removed after a host retry.
Conditions This problem occurs with any of the following conditions met.
Receiving command Withdraw (when removing relationships),
WCHK1 and CHK3 occur due to a failure, FRR processing started.
Category Flash Copy Version 2
Changed DKCMAIN

(10) SSB=9681, 9680


Item Description
Contents When performing update I/Os from a host while FCv2 relationships existed, SSB=9681 (failed
to lock), SSB=9680 (logic inconsistency) occurred.
Conditions This problem occurs with any of the following conditions met.
Receiving a lot of Establish/Withdraw commands,
Update I/O from the host.
Category Flash Copy Version 2
Changed DKCMAIN

(11) Timeout when at a time Pair split via RAID Manager


Item Description
Contents A command timeout occurred when performing a Pair split operation for 500 or more Shadow
Image pairs in same consistency group at a time via RAID Manager. 300-500 pairs’ status
changed, but others failed.
Conditions Problem occurs when performing Pair split operation at a time under anyone of the conditions.
1. The connection to the host might be interrupted due to defective cable,
2. Plugging in/off cable during pair status changing,
3. A reset is performed to inactivate the Sync channel job, etc.
Category Shadow Image
Changed DKCMAIN

(12) Command PSF 27 Rejected during OS IPL


Item Description
Contents After having applied APAR OA11492 and OA13907 to z/OS, command PSF 27 (suborder 0D)
rejected during OS IPL. Micro-program modified to allow command PSF 27 (suborder 0D).
Conditions This problem occurs with all the following conditions met.
APAR OA11492, OA13907 are applied, and OS IPL.
Category True Copy for S/390/ True Copy for S/390 Async
Changed DKCMAIN

(13) FCv2 Pairs Suspend during SCRATCH Operations


Item Description
Contents FCv2 pairs suspended when performing SCRATCH operations for multiple relationships.
SSB=9684 and MIH occurred frequently. For a long time, the SCRATCH operations performed
frequently for multiple relationships by using FCv2. The Problem may occur depending on the
number of relationships and the timing of SCRATCH operations.
Category Flash Copy Version 2
Changed DKCMAIN

HDS Confidential 3of 3

Вам также может понравиться