Академический Документы
Профессиональный Документы
Культура Документы
SKILLS-BASED ASSESSMENT
(Total – 44 Points)
Name: Darren Boudreau Date: 12/09/2011__________
Topology Diagram
Background
Hardware Qty Description
Cisco Router 1 Included in Packet Tracer file.
Cisco Switch 1 Included in Packet Tracer file.
Computer (host) 2 Included in Packet Tracer file.
CAT-5 or better straight-through UTP cables 2 Connects Router1 and Host2 to Switch1.
CAT-5 cross-over UTP cable 1 Connects Host 1 to Router1.
Console (rollover) cable 1 Connects Host1 to Router1 console.
Table 1 - Equipment and Hardware for Skills-Based Assessment
The necessary equipment and cables will be provided and/or available within the Packet Tracer file called “SBA
- Student File.pkt”
Task 1: Design the Logical LAN Topology. (18 Points / Time – 40 Minutes)
Given two IP addresses and masks of 192.168.25.0/24 and 192.168.35.0/24 (address / mask), design an IP
addressing scheme that satisfies the following requirements:
Host computers will use the FIRST IP address in the subnet. The router port(s) will use the LAST network host
address in each subnet.
Subnet A (6 Points)
Student
Specification Answers
Total number of bits in the network portion 28
IP mask (binary) 11111111.11111111.11111111.00000000
IP mask (decimal) 255.255.255.0
Number of usable hosts per network 254
First IP Host address 192.168.25.1
Last IP Host address 192.168.25.254
Subnet B (6 Points)
Student
Specification Answers
Total number of bits in the network portion 24
IP mask (binary) 11111111.11111111.11111111.00000000
IP mask (decimal) 255.255.255.255.0
Number of usable hosts per network 254
First IP Host address 192.168.35.1
Last IP Host address 192.168.35.254
After configuring each host computer, record the host network settings with the ipconfig /all command.
Use the following table to methodically verify connectivity with each network device. Take corrective action to
establish connectivity if a test fails: