Академический Документы
Профессиональный Документы
Культура Документы
LF12G301
distortion.
Copper voice coil construction, suspensions and cone materials designed to survive at 450
Watt RMS power.
40 2000
127
127 mm
mm
THIELE - SMALL PARAMETERS 4
Resonance frequency Fs 43 Hz
DC resistance Re 5.8 ohm
ø 180 mm Mechanical factor Qms 4.6
Electrical factor Qes 0.23
ø 280 mm
Total factor Qts 0.22
110
110 BL Factor BL 19 T·m
Effective Moving Mass Mms 56 gr
100
100 Equivalent Cas air load Vas 97 liters
(dB)
1w/1m (dB)
80
80 Half-space efficiency Eff 3.23 %
20
20 100
100 1.000 10.000 20.000
Frequency (Hz) MOUNTING INFORMATION
Frequency response curve of the loudspeaker taken in a hemispherical, free field environment Overall Diameter 320/12.6 mm/inch
and mounted in a closed box with an internal volume of 600 litres (21,2 cu.ft) enclosing the rear
of the driver Bolt Circle Diameter 293-304/11.5-12 mm/inch
Bolt Hole Diameter 6.5/0.3 mm/inch
316
316
Front Mount Baffle Cut-out 282/11.1 mm/inch
Rear Mount Baffle Cut-out 284/11.2 mm/inch
Impedance (ohms)
100
100
Depth 127/5 mm/inch
Volume occupied by the driver 6 2.6/0.09 liters/ft3
10
10
SHIPPING INFORMATION
Net Weight 7.3/16.2 Kg/Lbs
20
20 100
100 1.000 10.000 20.000
Shipping Weight 8.1/18.0 Kg/Lbs
Frequency (Hz)
NOTES TO SPECIFICATIONS
1 Program Power is defined as 3 dB greater than AES power. - 2 AES standard. - 3 Sensitivity measurement is based on a 500-2,5 kHz pink noise signal with input power of 2.83V @ 8 Ohms. - 4 Thiele-Small parameters are
measured after a 2 hour warm up period running the loudspeaker at full power handling capacity. - 5 The maximum linear excursion is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg the gap depth. - 6
Calculated for front mounting on 18 mm thick board.
The data are not binding; RCF reserves the right to modify the data at any time and without previous notice.
91