Академический Документы
Профессиональный Документы
Культура Документы
Product Data
_______________________________________________________________________________
Form Comp. A: Liquid Silicate Dispersion
Comp. B: Finely-graded quartz powder with specially
selected chemical protective additives
_______________________________________________________________________________
Chemrite Silicate Mortar
_______________________________________________________________________________
Packaging 20 Kg set:
Powder Component: 16 Kg
Liquid Component: 4 Kg
_______________________________________________________________________________
Storage Condition Store in a dry area between 5°C and 35°C. Protect from
sunlight.
_______________________________________________________________________________
Shelf life 12 months minimum from production date if stored
properly in original unopened packaging in a cool, shaded
area.
_______________________________________________________________________________
Technical Data
_______________________________________________________________________________
Pot life (Mixture) 40 minutes (at 25°C)
20 minutes (at 40°C)
_______________________________________________________________________________
Density Fresh mixture: Approximately 2.00 Kg/Lit
_______________________________________________________________________________
Consumption 2.0 – 2.5 Kg/m2 per one mm thickness
_______________________________________________________________________________
Ambient Temperature Minimum 5°C; Maximum 40°C
(During Application)
_______________________________________________________________________________
pH Range (Resistant) 0 to 7
_______________________________________________________________________________
Compressive Strength ≥ 15 Mpa
_______________________________________________________________________________
Flexural Strength ≥ 1.5 Mpa
_______________________________________________________________________________
Application Details
_______________________________________________________________________________
Chemrite Silicate Mortar
_______________________________________________________________________________
Mixing Stir component A (liquid) thoroughly before pouring into a
clean mixing container. Add component B (powder) slowly
while mixing continuously. Use low speed electric mixers
(max.500 rpm) for 3 minutes avoiding entrapment of air.
By adding the powder in portions, the desired application
consistency can be obtained.
_______________________________________________________________________________
Application After mixing the two components of Chemrite Silicate
Mortar thoroughly in the specified proportion, apply the
wet mixture on the cleaned surface free of bitumen, oil,
grease, loose particles etc.
For effective protection against chemical attack, apply the
product to achieve required thickness in at least two layers.
_______________________________________________________________________________
Curing Apply regular curing methods on the finished mortar
surface.
_______________________________________________________________________________
Cleaning Application and mixing tools should be cleaned with water
while material is still fresh. Hardened material can only be
removed mechanically.
_______________________________________________________________________________
Safety
_______________________________________________________________________________
Precautions 1. Accidental splashes to the skin must be washed off
with water and soap.
2. Accidental splashes to the eyes must be rinsed with
clean water. Seek medical attention without delay.
_______________________________________________________________________________
Toxicity Non-toxic, Non-solvented
_______________________________________________________________________________
Transportation Non-hazardous
_______________________________________________________________________________