Академический Документы
Профессиональный Документы
Культура Документы
Bucket Capacity:
0.63 m3
Engine Power:
100 kW/2,000 min-1
Operating Weight:
18,800 – 20,500 kg
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that
differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Specialist equipment is needed to use this machine
in demolition work. Before using it please contact your KOBELCO dealer. Due to our policy of continuous product improvements all designs and specifications are subject to
change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.
1 2
Power Meets Efficiency
1 2
Evolution Continues, with
The significant reduction of in-line resistance and
pressure loss boosts fuel efficiency. The electronic-control
common-rail engine features high-pressure fuel injection
Efficient Performance! Hydraulic Circuit Reduces Energy Loss Engine meets Stage IV Standards
We have made every effort to enhance fuel efficiency by minimizing hydraulic pressure
EGR valve
Pull up safety lock lever The variable-geometry turbocharger While ensuring sufficient oxygen for EGR
H-mode Maximum power for maximum productivity on your If the safety lock lever is left up, the
toughest jobs adjusts air intake to maximize combustion, cooled emission gases are
engine will stop automatically. Engine deceleration
combustion efficiency. mixed with the air intake and re-circulated
This eliminates wasteful idling Alarm
Engine
4 sec At low engine speeds the nozzles are into the engine. The lowered oxygen
Engine rpm
S-mode Ideal balance of productivity and fuel efficiency for a during standby, saving fuel and stops
range of urban engineering projects 55 sec closed, the turbo speed increased and temperature lowers the combustion
reducing CO2 emissions as well.
air intake is boosted. This helps lower temperature and increases combustion
60 sec Elapsed fuel consumption. efficiency.
ECO-mode Minimum fuel consumption for utility projects and time At low-speed At high-speed
other work that demands precision
3 4
Evolution Continues, with
The significant reduction of in-line resistance and
pressure loss boosts fuel efficiency. The electronic-control
common-rail engine features high-pressure fuel injection
Efficient Performance! Hydraulic Circuit Reduces Energy Loss Engine meets Stage IV Standards
We have made every effort to enhance fuel efficiency by minimizing hydraulic pressure
EGR valve
Pull up safety lock lever The variable-geometry turbocharger While ensuring sufficient oxygen for EGR
H-mode Maximum power for maximum productivity on your If the safety lock lever is left up, the
toughest jobs adjusts air intake to maximize combustion, cooled emission gases are
engine will stop automatically. Engine deceleration
combustion efficiency. mixed with the air intake and re-circulated
This eliminates wasteful idling Alarm
Engine
4 sec At low engine speeds the nozzles are into the engine. The lowered oxygen
Engine rpm
S-mode Ideal balance of productivity and fuel efficiency for a during standby, saving fuel and stops
range of urban engineering projects 55 sec closed, the turbo speed increased and temperature lowers the combustion
reducing CO2 emissions as well.
air intake is boosted. This helps lower temperature and increases combustion
60 sec Elapsed fuel consumption. efficiency.
ECO-mode Minimum fuel consumption for utility projects and time At low-speed At high-speed
other work that demands precision
3 4
More Power and
Higher Efficiency
The highly efficient hydraulic system Improved Fuel Efficiency Contributes to High Performance Get More Done Faster with Superior Operability
minimizes fuel consumption while Superior Digging Volume Piping for Quick Hitch A Light Touch on the Lever Means
Smoother, Less Tiring Work NEW
maximizing power. With nimble movement Powerful digging force delivers outstanding performance.
and ample digging power, this excavator Max. Bucket Digging Force Max. Arm Crowding Force Top-class excavating
114 kN 82.3 kN
reach extends
promises to improve your job productivity. Normal: Normal: working range
8,970 mm
Max. digging depth
5,990 mm
Max. vertical wall digging depth
A quick hitch hydraulic line, which speeds It takes 25% less effort to work the
5,450 mm up attachment changes, is equipped as operation lever, which reduces fatigue over
standard. long working hours or continued
*Values are for STD arm (2.6 m)
operations.
Multi-Display in Color
Brilliant colors and graphic displays are easy to
1 recognize on the LCD multi-display in the console. The
display shows fuel consumption, maintenance intervals,
and more.
2
1 Analog gauge provides an intuitive reading of PM accumulation/ Fuel consumption Maintenance
fuel level and engine water temperature Urea accumulation display
3
2 Green indicator light shows low fuel consumption
during operation
3 PM accumulation display (left)/
4 Urea level gauge (right)
4 Fuel consumption
5 Digging mode switch
6 Monitor display switch
Breaker mode Nibbler mode
One-Touch Attachment
Mode Switch
A simple flick of a switch converts the hydraulic circuit
and flow amount to match attachment changes. Icons
help the operator to confirm the proper configuration
5 6 at a glance.
5 6
More Power and
Higher Efficiency
The highly efficient hydraulic system Improved Fuel Efficiency Contributes to High Performance Get More Done Faster with Superior Operability
minimizes fuel consumption while Superior Digging Volume Piping for Quick Hitch A Light Touch on the Lever Means
Smoother, Less Tiring Work NEW
maximizing power. With nimble movement Powerful digging force delivers outstanding performance.
and ample digging power, this excavator Max. Bucket Digging Force Max. Arm Crowding Force Top-class excavating
114 kN 82.3 kN
reach extends
promises to improve your job productivity. Normal: Normal: working range
8,970 mm
Max. digging depth
5,990 mm
Max. vertical wall digging depth
A quick hitch hydraulic line, which speeds It takes 25% less effort to work the
5,450 mm up attachment changes, is equipped as operation lever, which reduces fatigue over
standard. long working hours or continued
*Values are for STD arm (2.6 m)
operations.
Multi-Display in Color
Brilliant colors and graphic displays are easy to
1 recognize on the LCD multi-display in the console. The
display shows fuel consumption, maintenance intervals,
and more.
2
1 Analog gauge provides an intuitive reading of PM accumulation/ Fuel consumption Maintenance
fuel level and engine water temperature Urea accumulation display
3
2 Green indicator light shows low fuel consumption
during operation
3 PM accumulation display (left)/
4 Urea level gauge (right)
4 Fuel consumption
5 Digging mode switch
6 Monitor display switch
Breaker mode Nibbler mode
One-Touch Attachment
Mode Switch
A simple flick of a switch converts the hydraulic circuit
and flow amount to match attachment changes. Icons
help the operator to confirm the proper configuration
5 6 at a glance.
5 6
Increase in
Increased Power, productivity
means
“Power”
with Enhanced Durability
to Maintain the Structural design increases strength, while
eliminating hydraulic problems.
Enhanced durability takes productivity to a
Clean, contaminant-free fuel and hydraulic fluid are essential to stable performance. The improved filtration systems 500 Hour Attachment Lubrication Interval Reliable Construction
reduce the risk of mechanical trouble and enhance longevity and durability. The self-lubrication bushings are used at the attachment pins and the bushings with high Forged and cast components are used throughout. Under-side of arm reinforced with a
abrasion resistant property are used at the pins around the bucket. The lubrication cycle rock guard to prevent damage to arm. Track guides help prevent the crawlers from
NEW NEW
Hydraulic Fluid Filter Hydraulic Fluid Filter Clog Detector of the lubrication points around the bucket is 250 hours and that of other lubrication coming off the rollers.
Pressure Pressure points is 500 hours.
Recognized as the best in the industry, Pressure sensors at the inlet and outlet of the hydraulic fluid detection system detection system
our premium-fine filter separates out filter monitor differences in pressure to determine the degree
even the smallest particles. New cover of clogging If the difference in pressure exceeds a
prevents contamination when changing predetermined level, a warning appears on the multi-display,
filters. so any contamination can be removed from the filter before it Hydraulic fluid reservoir
Hydraulic fluid filter
reaches the hydraulic fluid reservoir.
Reinforced track guide
NEW
Double-Element Fuel Filter *Additionally the two piece bucket bushings protect the
Air Cleaner The pre-filter, with built-in water New Return Larger-size
side of the arm from contact and then wear from the
bucket ears. Should the bucket bushings need
separator, is a new addition that replacement, they can be replaced separately from the Reinforced arm with rock guard
The large-capacity element features a
features a final stage to maximize larger main bushing, reducing costs.
double-filter structure that keeps the
filtering performance.
engine running clean even in
industrial environments. Engine Final filter
Main filter
Pre-filter Fuel tank
7 8
Increase in
Increased Power, productivity
means
“Power”
with Enhanced Durability
to Maintain the Structural design increases strength, while
eliminating hydraulic problems.
Enhanced durability takes productivity to a
Clean, contaminant-free fuel and hydraulic fluid are essential to stable performance. The improved filtration systems 500 Hour Attachment Lubrication Interval Reliable Construction
reduce the risk of mechanical trouble and enhance longevity and durability. The self-lubrication bushings are used at the attachment pins and the bushings with high Forged and cast components are used throughout. Under-side of arm reinforced with a
abrasion resistant property are used at the pins around the bucket. The lubrication cycle rock guard to prevent damage to arm. Track guides help prevent the crawlers from
NEW NEW
Hydraulic Fluid Filter Hydraulic Fluid Filter Clog Detector of the lubrication points around the bucket is 250 hours and that of other lubrication coming off the rollers.
Pressure Pressure points is 500 hours.
Recognized as the best in the industry, Pressure sensors at the inlet and outlet of the hydraulic fluid detection system detection system
our premium-fine filter separates out filter monitor differences in pressure to determine the degree
even the smallest particles. New cover of clogging If the difference in pressure exceeds a
prevents contamination when changing predetermined level, a warning appears on the multi-display,
filters. so any contamination can be removed from the filter before it Hydraulic fluid reservoir
Hydraulic fluid filter
reaches the hydraulic fluid reservoir.
Reinforced track guide
NEW
Double-Element Fuel Filter *Additionally the two piece bucket bushings protect the
Air Cleaner The pre-filter, with built-in water New Return Larger-size
side of the arm from contact and then wear from the
bucket ears. Should the bucket bushings need
separator, is a new addition that replacement, they can be replaced separately from the Reinforced arm with rock guard
The large-capacity element features a
features a final stage to maximize larger main bushing, reducing costs.
double-filter structure that keeps the
filtering performance.
engine running clean even in
industrial environments. Engine Final filter
Main filter
Pre-filter Fuel tank
7 8
Comfortable Cab is
Now Safer than Ever
The high level of air-tightness keeps dust The large air-conditioner has registers on the
out of the cab. back pillars that blow from behind and to the Seat suspension absorbs vibration Seat recliner can be pushed back flat Double slides allow adjustment for optimum comfort
right and left of the operator’s seat. They can be
Quiet Inside adjusted to put a direct flow of cool/warm air Interior Equipment Adds to Comfort and Convenience
on the operator, which means a more
The high level of air-tightness ensures a comfortable operating environment.
quiet, comfortable cabin interior.
Low Vibration
Coil springs absorb small vibrations, and
high suspension mounts filled with USB pin/12V power outlet
silicone oil reduce heavy vibration. The Bluetooth Installed Radio
long stroke achieved by this system Bluetooth installed to allow connections
provides excellent protection from with smartphones and other devices.
vibration.
Safety
Greater safety assured by rearview Rear view shows the area directly
mirror. behind the cab.
9 10
Comfortable Cab is
Now Safer than Ever
The high level of air-tightness keeps dust The large air-conditioner has registers on the
out of the cab. back pillars that blow from behind and to the Seat suspension absorbs vibration Seat recliner can be pushed back flat Double slides allow adjustment for optimum comfort
right and left of the operator’s seat. They can be
Quiet Inside adjusted to put a direct flow of cool/warm air Interior Equipment Adds to Comfort and Convenience
on the operator, which means a more
The high level of air-tightness ensures a comfortable operating environment.
quiet, comfortable cabin interior.
Low Vibration
Coil springs absorb small vibrations, and
high suspension mounts filled with USB pin/12V power outlet
silicone oil reduce heavy vibration. The Bluetooth Installed Radio
long stroke achieved by this system Bluetooth installed to allow connections
provides excellent protection from with smartphones and other devices.
vibration.
Safety
Greater safety assured by rearview Rear view shows the area directly
mirror. behind the cab.
9 10
GPS
Operating Hours Fuel Consumption Data Graph of Work Content
• A comparison of operating times of machines at multiple Data on fuel consumption and idling times can be used to The graph shows how working hours are divided among
locations shows which locations are busier and more indicate improvements in fuel consumption. different operating categories, including digging, idling,
profitable. traveling and optional operations.
• Operating hours on site can be accurately recorded, for
running time calculations needed for rental machines, etc.
Customer KOBELCO office KOBELCO service personnel Remote Monitoring for Peace of Mind Alarm Information Can Be Received Daily/Monthly Reports
KOMEXS (Kobelco Monitoring Excavator System) uses satellite
communication and internet to relay data, and therefore can be
through E-mail Operational data downloaded onto a computer helps in
Alarm information or maintenance notice can be received formulating daily and monthly reports.
deployed in areas where other forms of communication are difficult.
through E-mail, using a computer or cell phone.
When a hydraulic excavator is fitted with this system, data on the
machine’s operation, such as operating hours, location, fuel
consumption, and maintenance status can be obtained remotely.
Direct Access to Operational Status Alarm messages can be received on mobile device.
Location Data
Accurate location data can be obtained even from sites where communications are difficult. Security System
Engine Start Area Alarm
Alarm It can be set an alarm if the
machine is moved out of its
The system can be set an
designated area to another
alarm if the machine is
location.
operated outside designated
time.
Latest location Location records Work data Engine start alarm outside prescribed work time Alarm for outside of reset area
11 12
GPS
Operating Hours Fuel Consumption Data Graph of Work Content
• A comparison of operating times of machines at multiple Data on fuel consumption and idling times can be used to The graph shows how working hours are divided among
locations shows which locations are busier and more indicate improvements in fuel consumption. different operating categories, including digging, idling,
profitable. traveling and optional operations.
• Operating hours on site can be accurately recorded, for
running time calculations needed for rental machines, etc.
Customer KOBELCO office KOBELCO service personnel Remote Monitoring for Peace of Mind Alarm Information Can Be Received Daily/Monthly Reports
KOMEXS (Kobelco Monitoring Excavator System) uses satellite
communication and internet to relay data, and therefore can be
through E-mail Operational data downloaded onto a computer helps in
Alarm information or maintenance notice can be received formulating daily and monthly reports.
deployed in areas where other forms of communication are difficult.
through E-mail, using a computer or cell phone.
When a hydraulic excavator is fitted with this system, data on the
machine’s operation, such as operating hours, location, fuel
consumption, and maintenance status can be obtained remotely.
Direct Access to Operational Status Alarm messages can be received on mobile device.
Location Data
Accurate location data can be obtained even from sites where communications are difficult. Security System
Engine Start Area Alarm
Alarm It can be set an alarm if the
machine is moved out of its
The system can be set an
designated area to another
alarm if the machine is
location.
operated outside designated
time.
Latest location Location records Work data Engine start alarm outside prescribed work time Alarm for outside of reset area
11 12
Efficient Maintenance Keeps the Machine
in Peak Operating Condition
Self-diagnostic function provides early-warning detection and display of electrical system malfunctions
More finely differentiated fuses make it easier to locate malfunctions. Internal and external air conditioner filters can be easily removed
DEF/Urea tank
without tools for cleaning.
Positioned where the step opens.
Easy Cleaning
Step Handrail
Maintenance Work, Daily Checks, Etc., Can Be Done from Ground Level
The layout allows for easy access from the ground for many daily checks and regular maintenance tasks.
Special crawler frame design is easily cleaned Detachable two-piece floor mat with handles Engine oil pan equipped with drain valve.
of mud. for easy removal. A floor drain is located
under floor mat.
1 3
2 Long-life
Long-Interval Maintenance Replacement
Highly Durable Premium-fine Filter
hydraulic oil: Long-life hydraulic oil reduces cost and labor. cycle: The high-capacity hydraulic oil filter incorporates glass fiber with
superior cleaning power and durability.
Left side
Fuel filter with built-in
water separator
Pre-fuel filter with built-in
water separator Right side Engine oil filter 5,000 1,000
hours hours
Laid out for easy access to radiator and 1 Fuel filter with built-in water separator
cooling system elements 2 Pre-fuel filter with built-in water separator
3 Engine oil filter
13 14
Efficient Maintenance Keeps the Machine
in Peak Operating Condition
Self-diagnostic function provides early-warning detection and display of electrical system malfunctions
More finely differentiated fuses make it easier to locate malfunctions. Internal and external air conditioner filters can be easily removed
DEF/Urea tank
without tools for cleaning.
Positioned where the step opens.
Easy Cleaning
Step Handrail
Maintenance Work, Daily Checks, Etc., Can Be Done from Ground Level
The layout allows for easy access from the ground for many daily checks and regular maintenance tasks.
Special crawler frame design is easily cleaned Detachable two-piece floor mat with handles Engine oil pan equipped with drain valve.
of mud. for easy removal. A floor drain is located
under floor mat.
1 3
2 Long-life
Long-Interval Maintenance Replacement
Highly Durable Premium-fine Filter
hydraulic oil: Long-life hydraulic oil reduces cost and labor. cycle: The high-capacity hydraulic oil filter incorporates glass fiber with
superior cleaning power and durability.
Left side
Fuel filter with built-in
water separator
Pre-fuel filter with built-in
water separator Right side Engine oil filter 5,000 1,000
hours hours
Laid out for easy access to radiator and 1 Fuel filter with built-in water separator
cooling system elements 2 Pre-fuel filter with built-in water separator
3 Engine oil filter
13 14
Specifications
4.49 5.35
ground level
f
Cab j- Digging depth for 8' (2.4 m)
5.76 6.31
All-weather, sound-suppressed steel cab mounted on the silicon-sealed flat bottom
1
Hydraulic System suspension mounts and equipped with a heavy, insulated floor mat.
Control
Bucket capacity (ISO heaped) 0.63 m3 0.63 m3
i
2
Digging Force (ISO 6015) Unit: kN j g 3
Two hand levers and two foot pedals for travel c
Pump Boom 5.2 m 4
Two hand levers for excavating and swing Standard Long
Two variable displacement pumps + Arm length 5
Type Electric rotary-type engine throttle 2.6 m 3.1 m
One gear pump 6
Noise Levels 114 114
Max. discharge flow 2 x 160 L/min, 1 x 20 L/min Bucket digging force 7
External 102 dB (ISO 6395) 126* 126*
Relief valve setting Operator 68 dB (ISO 6396) 82.3 71.7 11m 10 9 8 7 6 5 4 3 2 1
8m
Arm crowding force
Boom, arm and bucket 34.3 MPa 90.6* 78.8*
Power Boost 37.8 MPa *Power Boost engaged. Standard Arm Long Arm
Travel circuit 34.3 MPa
Swing circuit 28.0 MPa Boom, Arm & Bucket Dimensions
Control circuit 5.0 MPa Unit: mm
Pilot control pump Gear type Standard Long SK180LC 3,660
Boom cylinder 110 mm x 1,156 mm Arm length G Tumbler distance
2.6 m 3.1 m SK180N 3,280
Main control valves 8-spool
Arm cylinder 125 mm x 1,285 mm A Overall length 8,700 8,710 SK180LC 4,450
Oil cooler Air cooled type H Overall length of crawler
Bucket cylinder 105 mm x 1,025 mm SK180LC 2,800 SK180N 4,070
B Overall width of crawler
SK180N 2,490 SK180LC 2,200
I Track gauge
C Overall height (to top of hand rail) 3,080 SK180N 1,990
D Ground clearance of rear end* 1,050 SK180LC 600
J Shoe width
Refilling Capacities & Lubrications E Ground clearance* 460 SK180N 500
Swing System F
F'
Tail swing radius
Distance from center of swing to rear end
2,550
2,550
K Overall width of upperstructure 2,490
G J
I
Attachments H B
4.49 5.35
ground level
f
Cab j- Digging depth for 8' (2.4 m)
5.76 6.31
All-weather, sound-suppressed steel cab mounted on the silicon-sealed flat bottom
1
Hydraulic System suspension mounts and equipped with a heavy, insulated floor mat.
Control
Bucket capacity (ISO heaped) 0.63 m3 0.63 m3
i
2
Digging Force (ISO 6015) Unit: kN j g 3
Two hand levers and two foot pedals for travel c
Pump Boom 5.2 m 4
Two hand levers for excavating and swing Standard Long
Two variable displacement pumps + Arm length 5
Type Electric rotary-type engine throttle 2.6 m 3.1 m
One gear pump 6
Noise Levels 114 114
Max. discharge flow 2 x 160 L/min, 1 x 20 L/min Bucket digging force 7
External 102 dB (ISO 6395) 126* 126*
Relief valve setting Operator 68 dB (ISO 6396) 82.3 71.7 11m 10 9 8 7 6 5 4 3 2 1
8m
Arm crowding force
Boom, arm and bucket 34.3 MPa 90.6* 78.8*
Power Boost 37.8 MPa *Power Boost engaged. Standard Arm Long Arm
Travel circuit 34.3 MPa
Swing circuit 28.0 MPa Boom, Arm & Bucket Dimensions
Control circuit 5.0 MPa Unit: mm
Pilot control pump Gear type Standard Long SK180LC 3,660
Boom cylinder 110 mm x 1,156 mm Arm length G Tumbler distance
2.6 m 3.1 m SK180N 3,280
Main control valves 8-spool
Arm cylinder 125 mm x 1,285 mm A Overall length 8,700 8,710 SK180LC 4,450
Oil cooler Air cooled type H Overall length of crawler
Bucket cylinder 105 mm x 1,025 mm SK180LC 2,800 SK180N 4,070
B Overall width of crawler
SK180N 2,490 SK180LC 2,200
I Track gauge
C Overall height (to top of hand rail) 3,080 SK180N 1,990
D Ground clearance of rear end* 1,050 SK180LC 600
J Shoe width
Refilling Capacities & Lubrications E Ground clearance* 460 SK180N 500
Swing System F
F'
Tail swing radius
Distance from center of swing to rear end
2,550
2,550
K Overall width of upperstructure 2,490
G J
I
Attachments H B
SK180N Long Arm: 3.1 m Bucket: without Shoe: 500 mm HEAVY LIFT
B 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach
Radius
A
7.5 m kg *2,260 *2,260 5.73 m
6.0 m kg *3,910 3,820 *2,040 *2,040 6.93 m
4.5 m kg *4,870 *4,870 *4,370 3,720 *2,630 2,560 *1,970 *1,970 7.66 m
3.0 m kg *8,960 *8,960 *6,070 5,450 *4,900 3,540 *3,950 2,490 *2,000 *2,000 8.04 m
1.5 m kg *7,790 *7,790 *7,290 5,010 5,460 3,340 3,890 2,400 *2,130 2,120 8.13 m
G. L. kg *7,550 *7,550 *7,960 4,730 5,280 3,180 3,810 2,330 *2,370 2,150 7.93 m
-1.5 m kg *6,000 *6,000 *10,460 8,510 *7,900 4,620 5,200 3,110 *2,830 2,340 7.43 m
-3.0 m kg *9,530 *9,530 *10,060 8,650 *7,060 4,650 *5,070 3,140 *3,790 2,810 6.55 m
-4.5 m kg *7,050 *7,050 *4,910 4,850 *3,980 *3,980 5.09 m
Notes:
1. Do not attempt to lift or hold any load that is greater than these lifting capacities at their specified 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic
lifting point radius and heights. Weight of all accessories must be deducted from the above lifting lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by
capacities. hydraulic capacity rather than tipping load.
2. Lifting capacities are based on machine standing on level, firm, and uniform ground. User must make 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before
allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden operating this machine. Rules for safe operation of equipment should be adhered to at all times.
stopping of loads, hazardous conditions, experience of personnel, etc. 6. Lifting capacities apply to only machine as originally manufactured and normally equipped by
3. Arm top defined as lift point. KOBELCO CONSTRUCTION MACHINERY CO., LTD.
17 18
Lifting Capacities
SK180N Long Arm: 3.1 m Bucket: without Shoe: 500 mm HEAVY LIFT
B 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m At Max. Reach
Radius
A
7.5 m kg *2,260 *2,260 5.73 m
6.0 m kg *3,910 3,820 *2,040 *2,040 6.93 m
4.5 m kg *4,870 *4,870 *4,370 3,720 *2,630 2,560 *1,970 *1,970 7.66 m
3.0 m kg *8,960 *8,960 *6,070 5,450 *4,900 3,540 *3,950 2,490 *2,000 *2,000 8.04 m
1.5 m kg *7,790 *7,790 *7,290 5,010 5,460 3,340 3,890 2,400 *2,130 2,120 8.13 m
G. L. kg *7,550 *7,550 *7,960 4,730 5,280 3,180 3,810 2,330 *2,370 2,150 7.93 m
-1.5 m kg *6,000 *6,000 *10,460 8,510 *7,900 4,620 5,200 3,110 *2,830 2,340 7.43 m
-3.0 m kg *9,530 *9,530 *10,060 8,650 *7,060 4,650 *5,070 3,140 *3,790 2,810 6.55 m
-4.5 m kg *7,050 *7,050 *4,910 4,850 *3,980 *3,980 5.09 m
Notes:
1. Do not attempt to lift or hold any load that is greater than these lifting capacities at their specified 4. The above lifting capacities are in compliance with ISO 10567. They do not exceed 87% of hydraulic
lifting point radius and heights. Weight of all accessories must be deducted from the above lifting lifting capacity or 75% of tipping load. Lifting capacities marked with an asterisk (*) are limited by
capacities. hydraulic capacity rather than tipping load.
2. Lifting capacities are based on machine standing on level, firm, and uniform ground. User must make 5. Operator should be fully acquainted with the Operator’s and Maintenance Instructions before
allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden operating this machine. Rules for safe operation of equipment should be adhered to at all times.
stopping of loads, hazardous conditions, experience of personnel, etc. 6. Lifting capacities apply to only machine as originally manufactured and normally equipped by
3. Arm top defined as lift point. KOBELCO CONSTRUCTION MACHINERY CO., LTD.
17 18
SK180LC-10 SK180N-10
Bucket Capacity:
0.63 m3
Engine Power:
100 kW/2,000 min-1
Operating Weight:
18,800 – 20,500 kg
Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that
differ from those of machines sold in your areas. Please consult your nearest KOBELCO distributor for those items you require. Specialist equipment is needed to use this machine
in demolition work. Before using it please contact your KOBELCO dealer. Due to our policy of continuous product improvements all designs and specifications are subject to
change without advance notice.
Copyright by No part of this catalog may be reproduced in any manner without notice.