Вы находитесь на странице: 1из 5

® 656 bkW / 880 bhp

3412 C
2100 rpm
Industrial

CATERPILLAR ENGINE
SPECIFICATIONS
V12, 4-Stroke-Cycle Diesel
Bore........................................................137.2 mm (5.4 in)
Stroke.....................................................152.4 mm (6.0 in)
Displacement................................... 27.02 L (1,648.86 in3)
Aspiration.............................Turbocharged / Aftercooled
Compression Ratio...................................................14.5:1
Rotation (from flywheel end).............. Counterclockwise
Capacity for Liquids
Cooling System....................................... 58.6 L (15.5 gal)
Lube Oil System (refill)........................... 68.1 L (18.0 gal)
Engine Weight, Net Dry (approximate).. 2,141 kg (4,720
lb)
Image shown may not reflect
actual engine

FEATURES
Emissions Full Range of Attachments
Non-certified rating. Meets Tier 1, Stage I Wide range of bolt-on system expansion
emissions. attachments, factory designed and tested

Single Source Supplier Unmatched Product Support Offered Through


Caterpillar Worldwide Caterpillar Dealer Network
- Casts engine blocks, heads, cylinder liners, and More than 1,500 dealer outlets.
flywheel housings Caterpillar factory-trained dealer technicians service
- Machines critical components every aspect of your industrial engine.
- Assembles complete engine 99.7% of parts orders filled within 24 hours
Ownership of these manufacturing processes worldwide.
enables Caterpillar to produce high quality, Caterpillar parts and labor warranty.
dependable product. Preventive maintenance agreements available for
repair before failure options.
Factory-designed systems built at Caterpillar ISO Scheduled Oil Sampling program matches your oil
certified facilities sample against Caterpillar set standards to
determine:
- internal engine component condition
Testing - presence of unwanted fluids
- presence of combustion by-products
Prototype testing on every model:
- proves computer design
- verifies system torsional stability Web Site
- functionality tests every model For all your industrial power requirements, visit
www.cat-industrial.com.
Every Caterpillar engine is dynamometer tested
under full load to ensure proper engine performance

Out of Production 10 July 2008 1:40 AM


®
3412 C INDUSTRIAL ENGINE
656 bkW (880 bhp)

STANDARD ENGINE EQUIPMENT


Lube System
Crankcase breather, top mounted, Oil cooler, RH, Oil
filler in valve cover and dipstick, RH, Oil filter, RH,
Rear sump oil pan

2 10 July 2008 1:40 AM


®
3412 C INDUSTRIAL ENGINE
656 bkW (880 bhp)

PERFORMANCE CURVES

IND - D - DM0394-01

Torque Metric
N•m

Engine
Power kW

BSFC
g/kW-hr

Engine Speed - rpm

Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 656 2983 212.4 166.1
2000 646 3085 210.8 162.3
1900 633 3179 209.7 158.1
1800 615 3261 208.9 153.0
1700 594 3334 211.2 149.4
1600 569 3394 213.5 144.7
1500 541 3442 215.9 139.2
1400 507 3460 222 134.2
1300 468 3440 228.9 127.8

3 10 July 2008 1:40 AM


®
3412 C INDUSTRIAL ENGINE
656 bkW (880 bhp)

PERFORMANCE CURVES

IND - D - DM0394-01

Engine English
Torque
lb•ft

Engine
Power bhp

BSFC
lb/bhp-hr

Engine Speed rpm

Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
rpm bhp lb•ft gal/hr
2100 880 2200 .349 43.9
2000 866 2275 .347 42.9
1900 848 2345 .345 41.8
1800 824 2405 .343 40.4
1700 796 2459 .347 39.5
1600 763 2503 .351 38.2
1500 725 2539 .355 36.8
1400 680 2552 .365 35.5
1300 628 2537 .376 33.8

4 10 July 2008 1:40 AM


®
3412 C INDUSTRIAL ENGINE
656 bkW (880 bhp)

RATINGS AND CONDITIONS

IND - D For service where maximum power is


required for periodic overloads. The maximum
power and speed capability of the engine can be
utilized for a maximum of 30 uninterrupted minutes
followed by one hour at IND - C. Time at full load is
not to exceed 10% of the duty cycle. Typical service
examples are: offshore cranes, runway snow
blowers, water well drills, portable air compressors,
and fire pump certification power.

Engine Dimensions
(1) Length 1995.4 mm (78.56 in) Note: Do not use for installation design.
See general dimension drawings for
(2) Width 1483.5 mm (58.41 in) detail (Drawing # 5N9282 ).
(3) Height 1496.1 mm (58.9 in)

Performance Number: DM0394-01 © 2008 Caterpillar


Feature Code: 412DI16 Arr. Number: 7W7541 All rights reserved.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
11684501 CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos,
"Caterpillar Yellow," and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of
Caterpillar and may not be used without permission.

Вам также может понравиться