Академический Документы
Профессиональный Документы
Культура Документы
REG1117A
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
D BATTERY-POWERED INSTRUMENTATION 5V n n
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
Copyright 1992−2004, Texas Instruments Incorporated
! !
www.ti.com
"#$$$%
"#$$$%
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
CONNECTION DIAGRAM
Front View
Plastic DDPAK
Plastic SOT−223
Tab is
VOUT
Tab is VOUT
2
"#$$$%
"#$$$%
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
PACKAGE/ORDERING INFORMATION(1)
OPERATING TRANSPORT
PACKAGE PACKAGE ORDERING
PRODUCT VO/IO PACKAGE-LEAD TEMPERATURE MEDIA,
DESIGNATOR MARKING NUMBER
RANGE QUANTITY
REG1117-2.85 Rails, 80
−40°C to
REG1117-2.85 2.85/800mA SOT223-3 DCY BB11172 Tape and Reel,
+125°C REG1117-2.85
2500
REG1117-3.3 Rails, 80
−40°C to
REG1117-3.3 3.3/800mA SOT223-3 DCY BB11174 Tape and Reel,
+125°C REG1117-3.3
2500
Tape and Reel,
REG1117F-3.3KTTT
−40 C to
−40°C 50
REG1117F-3.3 3.3/800mA DDPAK-3 KTT BB1117F4
+125°C Tape and Reel,
REG1117F-3.3/500
500
REG1117-5 Rails, 80
−40°C to
REG1117-5 5V/800mA SOT223-3 DCY BB11175 Tape and Reel,
+125°C REG1117-5
2500
REG1117 Rails, 80
−40°C to
REG1117 Adj./800mA SOT223-3 DCY BB1117 Tape and Reel,
+125°C REG1117
2500
REG1117A-1.8 Rails, 80
−40°C to
REG1117A-1.8 1.8V/1A SOT223-3 DCY R111718 Tape and Reel,
+125°C REG1117A-1.8
2500
Tape and Reel,
REG1117FA-1.8KTTT
−40 C to
−40°C 50
REG1117FA-1.8 1.8/1A DDPAK-3 KTT REG1117FA1.8
+125°C Tape and Reel,
REG1117FA-1.8/500
500
REG1117A-2.5 Rails, 80
−40°C to
REG1117A-2.5 2.5/1A SOT223-3 DCY R111725 Tape and Reel,
+125°C REG1117A-2.5
2500
Tape and Reel,
REG1117FA-2.5KTTT
−40 C to
−40°C 50
REG1117FA-2.5 2.5/1A DDPAK-3 KTT REG1117FA2.5
+125°C Tape and Reel,
REG1117FA-2.5/500
500
Tape and Reel,
REG1117FA-5/KTTT
−40 C to
−40°C 50
REG1117FA-5 5/1A DDPAK-3 KTT BB1117FA5.0
+125°C Tape and Reel,
REG1117FA-5/500
500
REG1117A Rails, 80
−40°C to
REG1117A Adj./1A SOT223-3 DCY BB1117A Tape and Reel,
+125°C REG1117A
2500
Tape and Reel,
REG1117FA/KTTT
−40 C to
−40°C 50
REG1117FA Adj./1A DDPAK-3 KTT REG1117FA
+125°C Tape and Reel,
REG1117FA/500
500
(1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.
3
"#$$$%
"#$$$%
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
ELECTRICAL CHARACTERISTICS
At TJ = +25°C, unless otherwise noted.
REG1117, REG1117A
4
"#$$$%
"#$$$%
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
REG1117, REG1117A
5
"#$$$%
"#$$$%
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
SIMPLIFIED SCHEMATIC
VIN
Current
Limit
Thermal
Limit
VOUT
10X
(Substrate)
6
"#$$$%
"#$$$%
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
TYPICAL CHARACTERISTICS
At TA = +25°C, all models, unless otherwise noted.
LOAD REGULATION
SHORT−CIRCUIT CURRENT vs TEMPERATURE ( ∆I LOAD = 800mA)
1400 1
1
REG1117A REG1117A−1.8
1200
−2
1100 −3
REG1117 Models −4
1000
−5
900 REG1117−5
−6
800 −7
−50 −25 0 25 50 75 100 −50 −25 0 25 50 75 100
Temperature (_ C) Temperature (_C)
80
4 REG1117−5
Ripple Rejection (dB)
70
3 60
2 50
1 40
REG1117A−1.8 30
0
VIN = 3.8V to 10V 20
−1 10
−2 0
−50 −25 0 25 50 75 100 10 100 1k 10k 100k
Temperature (_C) Frequency (Hz)
IO = 10mA 7
Fixed−Voltage Models
Output Voltage Change (%)
1.0 6
0 4
−1.0 2
−2.0 0
−50 −25 0 25 50 75 100 −50 −25 0 25 50 75 100
Temperature (_ C) Temperature (_C)
7
"#$$$%
"#$$$%
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
Output Voltage
Deviations (V)
Deviation (mV)
0.1 40 COUT = 10µF Tantalum
0 IOUT = 0.1A
20
−0.1 0
−20
CIN = 10µF
0.5 −40
Load Current (A)
COUT = 10µF
3.25
0 20 40 60 80 100 0 20 40 60 80 100 120 140 160 180 200
Time (µs) Time (µs)
VIN 3 2 VO
REG1117 VOUT R1 R2
(Adj) (V ) (Ω)(2) (Ω)(2)
C1 + + C2
10µF R1 10µF R1 + R2 1.25 Open Short
1 VO = x (1.25V) + (50µA) (R2)
Load R1 1.5 750 147
2.1 158 107
C3(1) + 2.85 169 215
R2 This term is negligible with
10µF 3 137 191
proper choice of values−see 3.3 115 187
table at right. 5 113 340
10 113 787
NOTES: (1) C3 optional. Improves high−frequency line rejection. (2) Resistors are standard 1% values.
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
3−Lead DDPAK(1)
0.51
0.45
0.085
0.2
All measurements
in inches.
0.155 0.05
0.10
THERMAL RESISTANCE vs
CIRCUIT BOARD COPPER AREA
Circuit Board Copper Area
60
Thermal Resistance, qJA (°C/W)
REG1117F
50 DDPAK Surface Mount Package
1oz copper
40
30
20
REG1117F
DDPAK Surface−Mount Package
10
0 1 2 3 4 5
Copper Area (inches2)
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
The SOT-223 package derives heat sinking from Table 1. SOT-223 qJA for Various Board
conduction through its copper leads, especially the large Configurations
mounting tab. These must be soldered to a circuit board
with a substantial amount of copper remaining, as shown SOT-223
in Figure 5. Circuit board traces connecting the tab and the THERMAL
TOTAL PC TOPSIDE(1) BACKSIDE RESISTANCE
leads should be made as large as practical. The mounting BOARD COPPER COPPER JUNCTION-
tab of both packages is electrically connected to VOUT. AREA AREA AREA TO-AMBIENT
2500mm2 2500mm2 2500mm2 46°C/W
2500mm2 1250mm2 2500mm2 47°C/W
Total Area: 50 x 50mm 2500mm2 950mm2 2500mm2 49°C/W
2500mm2 2500mm2 0 51°C/W
2500mm2 1800mm2 0 53°C/W
35 x 17 mm
1600mm2 600mm2 1600mm2 55°C/W
2500mm2 1250mm2 0 58°C/W
16 x 10 mm 16 x 10 mm
2500mm2 915mm2 0 59°C/W
1600mm2 600mm2 0 67°C/W
900mm2 340mm2 900mm2 72°C/W
900mm2 340mm2 0 85°C/W
Without backside copper: q JA ≈ 59_ C/W
With solid backside copper: q JA ≈ 49_C/W (1) Tab is attached to the topside copper.
Table 1 shows approximate values of qJA for various circuit INSPEC Abstract Number: B91007604, C91012627.
board and copper areas for the SOT-223 package. Nearby Kelly, E.G. “Thermal Characteristics of Surface 5WK9Ω
heat dissipating components, circuit board mounting Packages.” The Proceedings of SMTCON. Surface Mount
conditions, and ventilation can dramatically affect the Technology Conference and Exposition: Competitive
actual qJA. Proper heat sinking significantly increases the Surface Mount Technology, April 3−6, 1990, Atlantic City,
maximum power dissipation at a given ambient NJ, USA. Abstract Publisher: IC Manage, 1990, Chicago,
temperature, as shown in Figure 6. IL, USA.
www.ti.com
SBVS001D − OCTOBER 1992 − REVISED JULY 2004
TERMPWR TERMPWR
5V 5V
110Ω 110Ω
REG1117−5 REG1117−5
VIN > 12V In Out 5V to 10V VIN > 9.0V In Out 7.5V
+ + + +
10µF GND 100µF 10µF GND 100µF
2.5VOUT
+
10µF 1kΩ REF1004−2.5
Figure 8. Adjusting Output of Fixed Voltage Models Figure 9. Regulator with Reference
REG1117−5
5.2V Line
VIN In Out
5.0V Battery
+ GND
10µF
50Ω
1kΩ
REG1117−5
In Out
+ GND +
6.5V 10µF 100µF
REG1117−5
VIN In Out
+ GND +
10µF 100µF
VOUT = −5V
Floating Input
www.ti.com 17-Mar-2017
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
REG1117 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117
& no Sb/Br)
REG1117-2.85 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11172
& no Sb/Br)
REG1117-2.85/2K5 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11172
& no Sb/Br)
REG1117-2.85G4 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11172
& no Sb/Br)
REG1117-3.3 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11174
& no Sb/Br)
REG1117-3.3/2K5 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11174
& no Sb/Br)
REG1117-3.3/2K5G4 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11174
& no Sb/Br)
REG1117-3.3G4 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11174
& no Sb/Br)
REG1117-5 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11175
& no Sb/Br)
REG1117-5/2K5 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11175
& no Sb/Br)
REG1117-5G4 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB11175
& no Sb/Br)
REG1117/2K5 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117
& no Sb/Br)
REG1117/2K5G4 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117
& no Sb/Br)
REG1117A ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117A
& no Sb/Br)
REG1117A-1.8 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 R111718
& no Sb/Br)
REG1117A-1.8/2K5 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 R111718
& no Sb/Br)
REG1117A-1.8G4 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 R111718
& no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com 17-Mar-2017
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
REG1117A-2.5 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 R111725
& no Sb/Br)
REG1117A-2.5/2K5 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 R111725
& no Sb/Br)
REG1117A-2.5G4 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 R111725
& no Sb/Br)
REG1117A/2K5 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117A
& no Sb/Br)
REG1117A/2K5G4 ACTIVE SOT-223 DCY 4 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117A
& no Sb/Br)
REG1117AG4 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117A
& no Sb/Br)
REG1117F-3.3/500 ACTIVE DDPAK/ KTT 3 500 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG1117F4
TO-263 & no Sb/Br)
REG1117F-3.3KTTT ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG1117F4
TO-263 & no Sb/Br)
REG1117F33KTTTG3 ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG1117F4
TO-263 & no Sb/Br)
REG1117FA-1.8KTTT ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA1.8
REG1117FA-2.5/500 ACTIVE DDPAK/ KTT 3 500 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA2.5
REG1117FA-2.5KTTT ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA2.5
REG1117FA-5.0/500 ACTIVE DDPAK/ KTT 3 500 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA5.0
REG1117FA-5.0KTTT ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA5.0
REG1117FA-5.0KTTTG ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA5.0
REG1117FA/500 ACTIVE DDPAK/ KTT 3 500 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG1117FA
TO-263 & no Sb/Br)
REG1117FA1.8KTTTG3 ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA1.8
REG1117FA2.5KTTTG3 ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG
TO-263 & no Sb/Br) 1117FA2.5
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com 17-Mar-2017
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) (6) (3) (4/5)
REG1117FAKTTT ACTIVE DDPAK/ KTT 3 50 Green (RoHS CU SN Level-2-260C-1 YEAR 0 to 125 REG1117FA
TO-263 & no Sb/Br)
REG1117G4 ACTIVE SOT-223 DCY 4 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 125 BB1117
& no Sb/Br)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com 17-Mar-2017
Addendum-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Aug-2017
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Aug-2017
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Aug-2017
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
REG1117FA-5.0/500 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
REG1117FA-5.0KTTT DDPAK/TO-263 KTT 3 50 367.0 367.0 45.0
REG1117FA/500 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0
REG1117FAKTTT DDPAK/TO-263 KTT 3 50 367.0 367.0 45.0
Pack Materials-Page 3
MECHANICAL DATA
6,70 (0.264)
6,30 (0.248)
3,10 (0.122)
2,90 (0.114)
4
0,10 (0.004) M
Gauge Plane
1 2 3
0,25 (0.010)
0,84 (0.033) 0°–10°
2,30 (0.091)
0,66 (0.026)
0,10 (0.004) M
4,60 (0.181) 0,75 (0.030) MIN
1,70 (0.067)
1,80 (0.071) MAX 1,50 (0.059)
0,35 (0.014)
0,23 (0.009)
Seating Plane
4202506/B 06/2002
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated