Академический Документы
Профессиональный Документы
Культура Документы
4 year Warranty
Wide temperature range:
550 to 3200°C (1020 to 5792°F)
For induction heating applications where you ramp from
low temps to high temps over a long period of time
A single unit with a wide range can cover more
applications (fewer units needed)
Customers can reduce spares inventory
Sighting options:
Laser through the lens and visible through the lens
Local viewing where you cannot easily get to head
Video through the lens and visible through the lens
Remote viewing
LED through the lens and visible through the lens
Local viewing where you are concerned about spot size
and obstructions in FOV
A: (TEMPERATURE RANGE)
Mounting nut
1R L 600 to 1800°C (1112 to 3272°F) (2 color mode) 100:1 D:S
550 to 1800°C (1022 to 3272°F) (single color mode) 100:1 D:S
Fixed bracket H 1000 to 3200°C (1832 to 5792°F) 150:1 D:S
Printed Quick Start Guide C: (Sighting) L Laser through the lens and Visible through the lens
V Video Camera through the lens and Visible through the lens
D LED through the lens and Visible through the lens
Endurance Software mini DVD (Windows 7, 8) Note: Video Camera option not available with Profinet interface option.
Temperature range E: (Communications) 0 Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP-
Server server (Gives you ASCII, Ethernet, video, webserver)
1 Profinet network communications interface with installed M12 fieldbus connector
Lens type Note: Video "V" option not available with profinet option
E-CERT Calibration is traceable to the International System of Units (SI) through National Metrological
Sighting type Institutes, such as NIST (order as a separate line item).
Mounting Nut
(E_MN)
Fixed Bracket
(E_FB)
M12 Connector
Multi-conductor
Cable Connector
LED Temperature
Display
Mounting Nut
(E_MN)
Fixed Bracket
(E_FB) LCD Sensor
Parameter
E: (Communications) 0 Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP-
Server server (Gives you ASCII, Ethernet, video, webserver)
1 Profinet network communications interface with installed M12 fieldbus connector
Note: Video "V" option not available with profinet option
A: (TEMPERATURE RANGE)
C: (Sighting) L Laser through the lens and Visible through the lens
V Video Camera through the lens and Visible through the lens
D LED through the lens and Visible through the lens
Manual Focus Note: Video Camera option not available with Profinet interface option.
Far Focus (Knurl) 1 Harsh environment option - Air purge and integrated water cooling
Note: For cooling in ambient temperatures in excess of 175°C (350°F), see Thermojacket prices
below
Note: E-PW Spare
protective window E: (Communications) 0 Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP-
available 1
Server server (Gives you ASCII, Ethernet, video, webserver)
Profinet network communications interface with installed M12 fieldbus connector
Note: Video "V" option not available with profinet option
Laser designating
center spot of
LED designating
reticle
accurate spot size
Ambient limits E 1 R L F 1 L 0 0
C: (Sighting) L Laser through the lens and Visible through the lens
V Video Camera through the lens and Visible through the lens
D LED through the lens and Visible through the lens
Note: Video Camera option not available with Profinet interface option.
E: (Communications) 0 Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP-
Server server (Gives you ASCII, Ethernet, video, webserver)
1 Profinet network communications interface with installed M12 fieldbus connector
Note: Video "V" option not available with profinet option
M12 Connector
(Same as Mi3, MP150)
Ethernet Option
Web Server
Power over Ethernet (PoE)
ASCII over Ethernet
Video Stream
Connect to E-
Connect to PC or
Profinet Option ETHXXXXX
Ethernet network
Power over Ethernet (PoE) Connection to
Profinet Protocol M12 cable on
sensing head
E 1 R L F 1 L 0 0
PART NUMBER
A B C D E DESCRIPTION
A: (TEMPERATURE RANGE)
C: (Sighting) L Laser through the lens and Visible through the lens
V Video Camera through the lens and Visible through the lens
D LED through the lens and Visible through the lens
Note: Video Camera option not available with Profinet interface option.
E: (Communications) 0 Ethernet network communications interface with installed M12 fieldbus connector and built-in HTTP- E-ETHLTCB Ethernet cable, 80°C max.
Server server (Gives you ASCII, Ethernet, video, webserver) 7.5 meters ( 24ft.) long (Ordered
1 Profinet network communications interface with installed M12 fieldbus connector
Note: Video "V" option not available with profinet option
Separately)
Modline 5 Sensor
Existing Sensor connector Endurance Sensor
connector
connector
Terminal Block
Not the same as MR (only 2 wire RS-485)
Can still use existing MR terminal block
E-ETHXXXXX
M12 Connector Ethernet cable
(Same as Mi3, MP150) (Ordered Separately)
Ethernet Option
Web Server (Can fully
configure head)
Power over Ethernet
(PoE)
ASCII over Ethernet Connect to E-
Video Stream Connect to PC or
ETHXXXXX
Access to Endurance Ethernet network
Connection to
software M12 cable on
sensing head
Polarizing Filter
End Cup
Air Purge Collar
Mounting Nut
Existing MR Installation
Interconnection cable
RAYMAPB or
XXXMATBN4
Modline 5 Sensor
Endurance Sensor
connector
connector
Endurance Software
Sensor setup
Sensor Monitoring
Archiving
Web Server
Sensor setup
Sensor Monitoring
VLC player
Video camera streaming
Need to download from Internet
Items to Order
E-DC Demo Case $450 (400 €) which includes the
following items:
Swivel clamp
E-ETHLTCB Ethernet cable, 80°C max.
7.5 meters ( 33ft.) long.
E-POE PoE Injector provides power and also
acts as a single Ethernet hub (110/220VAC
input)
Endurance
Marathon Series (MM, MR) models
Modline 5 models
Modline 7 models ordered without cooling option (with head ordered as “XX-XXXX-X-X-2)
Model Description
Spot Scan Accessory for use with the following models:
Endurance E1R
SSA (uses BK-7 window) Marathon MR
MM 1M, 2M, 3M
Modline 5 5R, 52, 56, 5G
SSB (uses ZnS window) Spot Scan Accessory for use with the following models:
MM MT, G5, G7, LT
User Interface
Continuous Scanning
Stationary left scan Stationary right scan
position (for setup) position (for setup)
Stationary center
position (for setup)
Peak
emperatures
Endurance
Sensor Power MR
Supply MM
Sensor interconnect cable Modline 5
Modline 7
Periodic remote sighting through quartz window Camera video option to monitor sighting – Through the lens – Difficult to get to
2-3 times during a run. Need remote sighting Reduces maintenance costs
because hot and dangerous
Integrated heads moved from one vessel to the Ethernet network – PoE reduces installation Power supply and analog output cables each
next. costs vessel standalone
Long cable installation to control room. Needs Ethernet to network all sensors together Power supply and analog output cables each
to minimize this cost vessel standalone
Hostile environment. High ambient 65°C 4 year warranty. Sealed IP65 Ambient rating 60°C
(150°F). Cannot use water cooling. Need Ambient rating head - 65°C Ambient rating head in cooling jacket (water
durable solution Ambient rating head in cooling collar (air cooled) - 175°C
cooled) - 120°C
Need wide temperature range and measure up Wide temperature range 600-3200°C 600-2500°C range
to 3000°C
Sighting – work area can be caged so Camera sighting – simplifies LED sighting option difficult Provides EITHER laser or Visible
visible sighting from rear of sensor is troubleshooting (can see exactly what to resolve spot size and sighting. Not both simultaneously.
difficult. Need laser for local viewing is occurring on the process at the also if optimum focus is
or camera for remote viewing moment a temperature event occurs.) achieved IR Camera sighting via PAL or USB.
Also provides continuous monitor of Difficult to use this interface in a
sighting control room environment.
Laser sighting – local viewing sighting.
Use contact input to run laser on
EMF interference in process can cause Isolated analog outputs – reduce Does not provide isolation Power supply, analog output and
instability in sensor performance. installation costs and provides robust circuitry with analog digital interface are electrically
solution with isolation capability outputs isolated from each other
Hostile environment. High ambient 4 year warranty. Sealed IP65 3 year warranty 2 year warranty
65°C (150°F). Cannot use water Ambient rating head - 65°C
cooling. Need durable solution Ambient rating head in cooling collar
(air cooled) - 120°C
Sighting – work area extremely Camera sighting – Ethernet video with No video camera option for IR Camera sighting via PAL or USB.
dangerous. Need to continuously 640 x 480 camera can be remotely remote viewing. Only uses Difficult to use this interface in a
monitor the pour process with video monitored via webserver, Endurance through the lens sighting control room environment.
feed over an Ethernet network software or standard VLC video player
Need accurate temperature Endurance can handle up to 95% 90% attenuation on two 95% attenuation on two color unit
measurement attenuation and still make accurate color unit
measurement
Hostile environment. High ambient 4 year warranty. Sealed IP65 3 year warranty 2 year warranty
65°C (150°F). Cannot use water Ambient rating head - 65°C
cooling. Need durable solution Ambient rating head in cooling collar
(air cooled) - 120°C
Sighting – work area can be caged so Camera sighting – simplifies troubleshooting (can see exactly what LED sighting option difficult to Provides EITHER laser or Visible
visible sighting from rear of sensor is is occurring on the process at the moment a temperature event resolve spot size and also if sighting. Not both simultaneously.
difficult. Need laser for local viewing occurs.) Also provides continuous monitor of sighting optimum focus is achieved
or camera for remote viewing Laser sighting – local viewing sighting. Use contact input to run IR Camera sighting via PAL or USB.
laser on Difficult to use this interface in a
control room environment.
EMF interference in process can cause Isolated analog outputs – reduce installation costs and provides Does not provide isolation Power supply, analog output and
instability in sensor performance. robust solution with isolation capability circuitry with analog outputs digital interface are electrically
isolated from each other
Hostile environment. High ambient 4 year warranty. Sealed IP65 3 year warranty 2 year warranty
65°C (150°F). Cannot use water Ambient rating head - 65°C
cooling. Need durable solution Ambient rating head in cooling collar (air cooled) - 120°C
Video is important:
Important to know size and shape of flame for this application – while this is a primary
need, it may not be solvable with Endurance
Important to know size and form of material granules – dictates material quality
Watch out for dust and particulates in view as this can disrupt sensor
Speeds up troubleshooting process (remote temp indication and video option is a must)
Sighting – Control room video into kiln Camera sighting – Ethernet video with No video camera option IR Camera sighting via PAL or USB.
to monitor product quality, and flame 640 x 480 camera can be remotely Difficult to use this interface in a
characteristics. monitored via webserver, Endurance control room environment.
software or standard VLC video player
Hostile environment. High ambient 4 year warranty. Sealed IP65 3 year warranty 2 year warranty
requires high temperature water jacket Ambient rating enclosure - 315°C
solution