Академический Документы
Профессиональный Документы
Культура Документы
include a pump, Turbulator agitation nozzles will… Turbulator Nozzle Polypropylene Swedish Medical Center – Seattle, Washington
• Keep solids suspended for removal Clamp Base Fiberglass Reinforced Polypropylene Seven 300 Ton Cooling Towers utilizing V-200P skids with a
• Significantly reduce… Clamp Cap Fiberglass Reinforced Polypropylene Turbulator Eductor nozzle agitating system; unlike separator
– Tower “blow down” cycles Swivel Ball Polypropylene systems, which have constant circulation, these small, economical
– Water waste Clamp Spring Hardened 304 SS filter systems only have to operate a few hours a day to maintain
– Equipment maintenance Clamp O-Ring Buna-N a clean basin. Filtering 23 m3/hr (100 gpm) at 50 micron.
– Chemical use
Typical Installation PEMEX – Guanajuato, Mexico
Several wells supplying water to the Pemex facility had centrifugal separators
that were not removing fine particulate. VAF installed V-1000 filters with 50
micron filtration and the results are “clearly” indicated in the photo!
The patented BHD (Bi-directional Hydrodynamic Drive) Cooling Tower Skids Using V-Series Automatic Screen Filters
Skid Configurations: Models: improves screen cleaning efficiencies resulting in:
All models may be purchased with or without • 100% screen cleaning with controlled suction LCF-SERIES
pump and pump control. nozzle rotation
• Flush waste is less than 1% of filtrate flow 300 50 11 LCF200 LCF200-5 5 / 3.7 8 3
LCF-Series includes: basic painted steel
500 100 23 LCF200 LCF200-5X 5 / 3.7 15 6
skid, V-200P automatic filter, isolation • 70% fewer moving parts 700 150 34 LCF200 LCF200-7.5 7.5 / 5.6 23 9
valve, MF4 control and diaphragm flush
valve. Option includes bag recovery vessel. • Pre-assembled filtration systems to meet any
flow demand
CTF-SERIES
CTF-Series includes: upgraded epoxy • Filtration 10 to 1500 micron
coated steel railed skid, V-Series automatic 500 100 23 CTF200 CTF200-5X 5 / 3.7 15 6
• V-Series filter bodies, models 250 - 1500, 700 150 34 CTF250 CTF250-7.5 7.5 / 5.6 23 9
filter, isolation valves, inlet strainer, MF4 control
LC F-Series CTF-Series manufactured in 316L stainless steel 1000 300 68 CTF500 CTF500-15 15 / 11 45 18
and Option includes bag recovery vessel.
• All systems competitively priced 2300 700 159 CTF1000 CTF1000-30 30 / 22 106 41
3500 1100 250 CTF1500 CTF1500-50 50 / 37 167 65
LCS-Series includes: basic painted steel
skid, VHS separator, isolation valve and
manual purge valve. Options include pre- Cooling Tower Basin
strainer, auto purge and bag recovery vessel.
Filtered Water to Cooling Tower Skids Using Separators
Manifold of
CTS-Series includes: upgraded epoxy Turbulator TM Nozzles
coated steel railed skid, pre-strainer, VHS LCS-SERIES
separator, isolation valve and manual purge
valve. Options include auto purge and bag
recovery vessel. 300 100 23 LCS100 LCS100-3 3 / 2.2 20 7
400 150 34 LCS150 LCS150-5 5 / 3.7 30 11
500 200 45 LCS200 LCS200-7.5 7.5 / 5.6 40 15
LC S-Series CTS-Series 1000 300 68 LCS300 LCS300-10 10 / 7.5 60 22
Seawater Specialists
1800 500 114 LCS500 LCS500-20 20 / 14.9 100 37
CTS-SERIES
Remove Organic and Inorganic System Cleaning Features: Turbulator TM Nozzles
Filtration Skid Prevent Settling of
Particulates Including: • Standard flow range from 23 to 341 m3/hr
The optional 100% Recovery Vessel Eliminates Particulate to Maintain
(100 to1,500 gpm)
300 100 23 CTS100 CTS100-3 3 / 2.2 20 7
Efficiency Robbing a Clean Basin
• Sand • Rust Particles (Other flow rates available upon request) provides for Zero cooling tower waste 400 150 34 CTS150 CTS150-5 5 / 3.7 30 11
flo-WISE Particulate
TM