Академический Документы
Профессиональный Документы
Культура Документы
HORN SYSTEM
BODY ELECTRICAL
HORN
PARTS LOCATION
HATCHBACK:
STEERING PAD
- HORN RELAY
HO
B117145E03
HO–2 HORN – HORN SYSTEM
SEDAN:
STEERING PAD
- HORN RELAY
HO
B142261E01
HORN – HORN SYSTEM HO–3
SYSTEM DIAGRAM
HORN
HORN
HO
Battery
B133326E01
HO–4 HORN – HORN SYSTEM
HO
HORN – HORN RELAY (for Sedan) HO–5
COMPONENTS
INTEGRATION RELAY
(Built in Horn Relay)
HO
CONNECTOR
B135209E01
HO–6 HORN – HORN RELAY (for Sedan)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2. REMOVE NO. 1 RELAY BLOCK COVER
(a) Disengage the 3 claws and remove the No. 1 relay
block cover.
B135210
Protective Tape
HO B135211E01
B135213
HORN – HORN RELAY (for Sedan) HO–7
INSPECTION
1. INSPECT INTEGRATION RELAY (Built in Horn Relay)
(a) Check the resistance.
(1) Remove the horn fuse.
Battery (2) Using an ohmmeter, measure the resistance
between the terminals.
Standard resistance
Tester Connection Specified Condition
10 kΩ or higher
Ohmmeter A8 - T6 Below 1 Ω
(Battery voltage applied to terminals A7 and T6)
HO
B138430E01
INSTALLATION
1. INSTALL INTEGRATION RELAY (Built in Horn Relay)
(a) Connect the 3 connectors.
B135213
B135212
HO–8 HORN – HORN RELAY (for Sedan)
B135210
HO
HORN – HORN RELAY (for Hatchback) HO–9
COMPONENTS
HO
INTEGRATION RELAY
(Built in Horn Relay)
CONNECTOR
B138539E01
HO–10 HORN – HORN RELAY (for Hatchback)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2. REMOVE NO. 1 RELAY BLOCK COVER
(a) Disengage the 3 claws and remove the No. 1 relay
block cover.
B114446
Protective Tape
HO B114447E01
B114448
HORN – HORN RELAY (for Hatchback) HO–11
INSPECTION
1. INSPECT INTEGRATION RELAY (Built in Horn Relay)
(a) Check the resistance.
Battery
(1) Remove the horn fuse.
(2) Using an ohmmeter, measure the resistance
between the terminals.
Standard resistance
Tester Connection Specified Condition
10 kΩ or higher
Ohmmeter
A8 - T6 Below 1 Ω
(Battery voltage applied to terminals A7 and T6)
HO
B114449E01
INSTALLATION
1. INSTALL INTEGRATION RELAY (Built in Horn Relay)
(a) Connect the 3 connectors.
B114448
B114450
HO–12 HORN – HORN RELAY (for Hatchback)
B114446
HO
HORN – LOW PITCHED HORN (for Sedan) HO–13
COMPONENTS
x2
w/ Fog Light:
FOG LIGHT
CONNECTOR
FOG LIGHT CONNECTOR
x3
x2
x2
x3
w/ Front Spoiler:
x10 x2
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2. REMOVE FRONT SPOILER COVER (w/ Front Spoiler)
(See page ET-6)
3. REMOVE FRONT BUMPER COVER (See page ET-55)
4. REMOVE LOW PITCHED HORN ASSEMBLY
(a) Disconnect the low pitched horn connector.
(b) Remove the bolt and the low pitched horn.
B134901
INSPECTION
1. INSPECT LOW PITCHED HORN ASSEMBLY
(a) Check the operation.
(1) Apply battery voltage to the terminal and the
bracket, and check that the horn sounds.
HO Standard
Measurement Condition Standard
Battery Battery positive - Terminal 1 (IG+)
Horn sounds
B114453E01
Battery negative - Horn bracket
COMPONENTS
x5
HO
x2
x3
x2 x2
x3
w/ Fog Light:
B114656E02
HO–16 HORN – LOW PITCHED HORN (for Hatchback)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY
TERMINAL
2. REMOVE FRONT BUMPER COVER (See page ET-66)
3. REMOVE LOW PITCHED HORN ASSEMBLY
(a) Disconnect the low pitched horn connector.
(b) Remove the bolt and the low pitched horn.
B114452
INSPECTION
1. INSPECT LOW PITCHED HORN ASSEMBLY
(a) Check the operation.
(1) Apply battery voltage to the terminal and
bracket, and check that the horn sounds.
Standard
Condition Standard
HO Battery Positive battery - Terminal 1 (IG+)
Horn sounds
B114453E01
Negative battery - Horn bracket