Академический Документы
Профессиональный Документы
Культура Документы
CERTIFICATE OF CALIBRATION
Certificate No : 08-OC31356 -RevNo:0 WO.No : WA32662-FEB-18 Date Received : N/A
Customer Details :
Name : Emaar Community Management (L.L.C) Area :
Instrument Details :
Environmental Conditions :
Temperature : 21.1°C Atm - Pressure: 1002mbar Relative Humidity : 52%RH
ArabCal certifies that the above instrument meets all specifications as stated in the referenced procedure or manufacturer’s specification mentioned below unless
otherwise it will be mentioned in the attached data sheet or in the comments below). It has been calibrated against Arabcal’s Primary and secondary standards whose
calibration is traceable through NIST, NPL, DCL or other International/National Standards Institutes to the international Systems of Units (SI) or to accepted Intrinsic
standards of measurement or whose accuracy have been determined by ratio-type calibration techniques. ArabCal recommends recalibration of this instrument as per
manufacturers’ specifications/ clients’requirements/standard practices. Pass/Fail of an instrument is decided on the manufacturers’ specification or customer
requirements.
ArabCal’s Quality Management System complies with the requirements of ISO 9001:2008 and ISO/IEC 17025 standard. This report applies only to the instrument
identified above and it shall not be reproduced other than in full except with specific written approval of ArabCal. The reported data is valid only at the time of test and it
provides no guarantee that the unit will remain accurate between the calibration intervals. Copies of Traceable Certificates are available upon request.
The uncertainty evaluation has been carried out in accordance with EA-4/02; Guide to the Expression of the Uncertainty of Measurement in Calibration, requirements. Reported
expanded uncertainty is based on a combined uncertainty multiplied by a coverage factor k=2, providing the level of confidence of approximately 95 % (This statement is only
applicable if the datasheet contains uncertainty estimation).
Page : 1