Академический Документы
Профессиональный Документы
Культура Документы
Quality and Value for the ed0-002 Exam TestInside Practice Exams for Ericsson Ericsson Certification Certification
ed0-002 are written to the highest standards of technical accuracy, using only certified subject matter experts and
published authors for development.
3. 100% Guarantee to Pass Your Ericsson Certification exam and get your Ericsson Certification Certification.
If you do not pass the Ericsson Certification ed0-002 exam (ericsson bts competence exam) on your first attempt
using our TestInside testing engine and pdf file, we will give you a FULL REFUND of your purchasing fee.
use TestInside ed0-002 Q&A ensure you pass the exam at your first try.
TestInside professional provide Ericsson Certification ed0-002 the newest Q&A, completely covers ed0-002 test
original topic. With our complete Ericsson Certification resources, you will minimize your Ericsson Certification cost
and be ready to pass your ed0-002 tests on Your First Try, 100% Money Back Guarantee included!
Ericsson ed0-002 Test belongs to one of the Ericsson Certification certified test, if needs to obtain the Ericsson
Certification certificate, you also need to participate in other related test, the details you may visit the Ericsson
Certification certified topic, in there, you will see all related Ericsson Certification certified subject of examination.
Try free ed0-002 exam demo before you decide to buy it in Test-Inside.com.
Note:This pdf demo do not include the question's picture.
3. If VSWR supervision is disabled in the IDB, an alarm is sent to the BSC if the level reaches_____.
A. 1.8
B. 2.2
C. 2.8
D. The alarm is not sent to the BSC
Answer: D
9. Why should you use the ESD wrist strap when handling RUs?
A. to avoid an electrical shock to you
B. To ensure good contact is made
C. To avoid a static charge, which can damage electronic components
D. Both B and C
Answer: C
11. In OMT, what view shows the RUs installed in the GSM cabinet?
A. System View
B. Radio view
C. MO View
D. Cabinet View
Answer: D
12. What common LED indicators are in the CDU, PSU, BFU, and dTRU?
A. RBS Fault
B. Operational
C. Fault
D. B and C
Answer: D
13. Which one of the following safety precautions should be used when working on a live cabinet?
A. Have a licensed electrician on stand-by for power-related issues.
B. Always power down site to minimize potential hazards.
C. Energize all equipment before the power-up procedures are performed.
D. Never touch AC voltage connections when working on energized equipment
Answer: D
15. Bends to RF cables (coaxial) should be a minimum of ten (10) times the cable diameter.
A. RLSTC:CELL=12002B, STATE=HALTED;
B. RLSTC:SITE=12002,STATE=HALTED;
C. RLSTP:CELL=12002B, HALTED;
D. RLSTP:CELL=12002B, STATE=HALTED;
Answer: A
19. An ESD wrist strap must always be used when handling or installing _____.
A. a DXU
B. printed circuit boards
C. TRU/dTRU
D. All of the above
Answer: D