Академический Документы
Профессиональный Документы
Культура Документы
Mangala Field Data
Field Name Mangala
Oil Properties Oil Viscosity: 9 ‐ 17 cp
API Gravity: ~28 deg
Pour point: 42 – 44 deg C
Wax appearance temp. of live oil ~ 52 deg C
Wax dissolution temp. ~ 80 deg C
GOR ~ 180 – 200 scf/stb solution GOR
Bubble point: ~1300 psi (decreasing with depth)
Average Permeability ~2 darcy for FM‐1; ~8 darcy for FM‐3
Porosity 15 – 28%
Res. Temp. ~62 Deg C
Res. Pressure 1620 psi @ OWC (960 m TVDSS),
Avg gradient = 1.17 psi/m
CO2 Content ~4‐5 mole % in Reservoir Fluid, ~15‐25 mole% in
produced gas
H2S Content No initial H2S was present in Mangala formation fluid;
however, with contamination from injection water,
some wells show H2S concentration up to 500 ppm
Asphaltene Content <0.05 wt%
Wax Content 14.6 ‐ 25.5 wt%
Bhagyam Field Data
Oil Properties Oil Viscosity: 14 – 400 cp (Average 35 cp)
API Gravity: 21 – 32 deg; (decreasing with depth)
Pour point: 40 – 45 deg C
Wax appearance temp. of live oil ~ 49‐50 deg C
Wax dissolution temp. ~ 80 deg C
Initial solution GOR ~ 60 – 100 scf/stb (increasing
with depth)
Bubble point: 650‐880 psi (increasing with depth)
Sand Units
Upper Fatehgarh: FB‐1 (Sand) Lower Fatehgarh: FB‐
3 (Sand), FB‐4 (Sand), FB‐5 (Sand)
Average Permeability 3.5 D
Porosity 25‐30%
Res. Temp. ~53 Deg C
Res. Pressure 892 psi @ OWC (1470 ft TVDSS),
Avg gradient = 1.24 psi/m
CO2 Content
Live oil <1%
H2S Content
No initial H2S was present in Bhagyam formation
fluid; however, with contamination from injection
water, there is likelihood of H2S in low
concentrations.
Asphaltene Content <0.05 wt%
Wax Content 15‐30 wt%
Aishwariya Field Data
Oil Properties
Oil Viscosity: 6 – 30 cp
API Gravity: 26 – 30 deg; Average 28 deg
Pour point: 42 – 48 deg C
Wax appearance temp. of live oil ~ 67 deg C
Wax dissolution temp. ~ 80 deg C
GOR ~ 150 – 200 scf/stb solution GOR
Bubble point: 400 ‐900 psi (decreasing with depth)
Sand Units Upper Fatehgarh: FA‐1 (Sand) and FA‐2 (Shale)
Lower Fatehgarh: FA‐3 (Sand), FA‐4 (Sand), FA‐5A
(Shale) and FA‐5B (Sand)
Average Permeability 1.5 D (UF) and 2.5 D (LF)
Porosity 12 – 26%
Res. Temp. ~71 Deg C
Res. Pressure 1904 psi @ OWC (3796 ft TVDSS),
Avg gradient = 1.19 psi/m
CO2 Content ~30 mole % in Reservoir Fluid, ~80 – 90 mole% in
produced gas
H2S Content No initial H2S was present in Aishwariya formation
fluid; however, with contamination from injection
water, there is likelihood of H2S in low
concentrations.
Currently, wells with water cut have ~20 ppm H2S in
produced fluid.
Asphaltene Content 0.06‐0.08 wt%
Wax Content 32.86 wt%