Академический Документы
Профессиональный Документы
Культура Документы
Prof.C.Elayaraja
Asst.Prof/ECE
Kanchipuram (Dt.)
FORMAT FOR STUDENT PROJECT PROPOSAL
bonafide final year student of B.E (Electronics and Communication Engineering) course of our
college and it is also certified that two copies of utilization certificate and final report along with
seminar paper will be sent to the Council after completion of the project by the end of the April
2018.
1 Introduction 1
2 Objectives 1
3 Methodology 1
4 Block Diagram 2
5 Work Plan 3
6 Budget 3
Annexure - I
INTRODUCTION
Even though we have various sources for obtaining electric energy still we have demand on
electricity. In order to reduce the demands we are generating electricity from dense air. In this,
fan is used and this can be rotated because of dense air. Thus mechanical energy is converted
into electrical energy. The current obtained from this method is small compared to other
resources, this small energy even can used for glowing light, fans etc.
OBJECTIVE
A fan is mounted on the lamp post, which is situated near the railroads.
When the train crosses the lamp post, the fan which is mounted on the lamp post begins to
rotate in the desired direction.
The rotation of the fan is faster, as the train moves faster. This rotation of the fan is
mechanical energy, it is converted into electrical energy.
The energy obtained is stored in the battery and this energy can be used for glowing light,
sends the train passing message to next station about the train arrival automatically.
METHODOLOGY
A fan is mounted on the lamp post. When a train crosses the lamp post,the fan is rotated due
to dense air.
The fan is connected to the generator, in this mechanical energy is converted into electrical
1. Glowing of Lamps
BLOCK DIAGRAM
WORK PLAN: