Академический Документы
Профессиональный Документы
Культура Документы
SYSTIMAX
LESSON 1
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - iii
Table of Contents
INTRODUCTION .............................................................................................................................. 1
COPPER CABLES .............................................................................................................................. 2
MULTIPAIR CABLES ...................................................................................................................... 10
SUMMARY ....................................................................................................................................... 35
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - iv SYSTIMAX Products
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1-1
Introduction
SYSTIMAX is a ‘Brand’ name for SCS Products
PowerSUM exceeds CAT5E & GigaSPEED XL exceeds CAT6.
GigaSPEED X10D also exceeds the10GBaseT standards
CAT3 Products such as the M1 module and 1010 cables are
available for voice backbones
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1-2 SYSTIMAX Products
Copper Cables
Note:- Not all cables are available with different jacket types
1291 / 2291 & 3291 U/FTP cable exceed CAT 6A and meet
GigaSPEED X10D performance
1571 4pr OSP cable exceeds CAT6 specs and meets GigaSPEED
XL7 performance.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1-3
61 Series Cable
Long bundle
twist applied
Cylindrical space
claimed by
tight twists
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1-4 SYSTIMAX Products
71 Series Cable
Tight bundle
twist applied
Bi-sector tape in
between
Pairs to further improve
Cable performance
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1-5
88 Series Cable
PAIR INSULATION
ISOLATOR
PAIR SEPARATOR
23AWG CONDUCTOR
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1-6 SYSTIMAX Products
Outer Jacket
Pair Insulation
Flute
Flooding Compound
Conductor
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1-7
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1-8 SYSTIMAX Products
Packaging
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1-9
Foil wire
Typical Build Foil Flute
Solid 23 AWG (0.545 mm*)
Design separates
Pairs and improves
crosstalk
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 10 SYSTIMAX Products
Multipair Cables
1010 Cables
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 11
Administration Panels
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 12 SYSTIMAX Products
VisiPatch 360
FACT SHEET
Panel Description: - 32pr panels (8 x 4pr cables) in a 12 way or 4 way vertical frame.
The cables are punched down onto the blocks, cutting off the
excess tails with VP360 bits in a D Impact tool. They are then
terminated with 4pr dual row connecting blocks as required. A
clear plastic cover is fitted over the top making the cables
visible for checking. The patchcords ‘lock’ into place
preventing accidental disconnection whilst working on the
panel field. Can be wall mounted or panel mounted using
appropriate mounting frames.
Cable Applications: - Designed specifically for the X10D range of cables but can also
be used for GigaSPEED XL and also multipair cables for both
voice and data.
Common Sizes: - Available in 128pr (4 panel) or 384pr (12 panel) wall mounted
(4 or 12 way) frames. Supplied as kits complete with back
frame, wiring blocks, connecting blocks, cover and label
holders. Frames come ready snapped together and can be
extended vertically a maximum of 3 x 12 panel high as required
to make large patching fields.
Tooling Required: - Special VP360 bits which fit into the standard D-Impact tool
must be used using the High setting. These cut off 1pr of wires
at a time. There is also a 4pair bit available that fits the 788H1
tool. The 788H1 tool should also be used to seat the blocks
using the VP360 head.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 13
FACT SHEET
Category:- GigaSPEED XL (GS3) GigaSPEED X10D (GS6)
Panel Description:- Stainless steel-look finish front bezel. The Evolve GS6 panel
when combined with MGS600 modules and 91B series cable
offers improved performance and allows shorter patch cords in
the channel.
Cable Applications:- Suitable for entire range of GigaSPEED X10D and GigaSPEED
XL cables 4 pair cables.
Common Sizes:- Available in 24 and 48 port versions. The Evolve range has the
improved cable support management.
Upgradability:- iPatch ready-upgradeable. InstaPatch CU compatible.
Tooling Required:- The 110 D-Impact tools are used to terminate these panels
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 14 SYSTIMAX Products
FACT SHEET
Category:- GigaSPEED XL (GS3) GigaSPEED X10D (GS6)
Panel Description:- Stainless steel-look finish front bezel. The angled feature
eliminates the need for inter-bay cord and cable organizers
which significantly improves total frame density and improves
visibility of labeling and port identification
.
Cable Applications:- Suitable for entire range of GigaSPEED X10D and GigaSPEED
XL cables 4 pair cables.
Common Sizes:- Available in 24 and 48 port versions. This panel has the cable
support brackets mounted on the management bar.
Upgradability:- iPatch ready-upgradeable. InstaPatch CU compatible.
Tooling Required:- The 110 D-Impact tools are used to terminate these panels
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 15
FACT SHEET
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 16 SYSTIMAX Products
FACT SHEET
Category:- GigaSPEED GS3 (CAT 6)
GigaSPEED GS6 (CAT6A)
Panel Description:- PATCHMAX panels allow for termination to be made from the
front or the rear because its 6-Jack modules can be pivoted
forward for access. The system also features the termination
manager component used on the 1100GS panels and cable
management at the rear. This panel can be terminated from the
front or rear making it very adaptable. Panels all have the
stainless style finish.
Cable Applications:- Suitable for wide range of cables but specifically designed for
use with the 91B series Category 6A 4pr cable.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 17
PATCHMAX PowerSUM
FACT SHEET
Common Sizes:- Available in 24 (2U) & 48 (4U) port versions. Complete with
cable support bar on rear.
Tooling Required:- The 110 D Impact Tool is needed to terminate these panels.
Patchcords:- D8PS modular jack patch cords can be used.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 18 SYSTIMAX Products
FACT SHEET
Category:- Accepts modules from Category 3 MPS100E to GigaSPEED
X10D MGS600.
Panel Description:- Modular panel matching the rest of the Evolve range with the
stainless finish-look front bezel.
Common Sizes:- Available in 24 and 48 port versions both straight and angled.
Complete with cable support troughs mounted on the rear bar
to aid efficient cable management.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 19
FACT SHEET
Panel Description:- 19” modular panels. Easy insertion of modules from the rear
and easy removal using ‘cap’ from module inserted at the front.
Cable management is completed using ‘cone’ to bundle cables
in modules of 6. Angled version is also available
Cable Applications:- Suitable for all 4pr cables, MPS100E, MGS400 & MGS600
modules.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 20 SYSTIMAX Products
M4800 48 Port
M2400 24 Port
HD Caps
FACT SHEET
Category:- Dependant on modules used.
Up to X10D when used with MGS600 modules
Panel Description:- M2400 (24 way) or M4800 (48 way) PowerSUM Version
M2400 (24 way) or M4800 (48 way) GigaSPEED Version with
HD Caps for the MGS Modules.
Optional management bar available.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 21
FlexiMAX Panel
FACT SHEET
Category:- Dependant on modules used.
Cable Applications:- Suitable for all 4pr cables and MPS100E, MGS400 and MGS600
modules.
Common Sizes:- Available only in 1U 24 port versions. Provides integral cable
management at rear.
Tooling Required:- The 110 D-Impact Tools are used to terminate the modules
Patchcords:- Modular jack patch cords used either standard D8PS or GS8E
for XL applications.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 22 SYSTIMAX Products
FACT SHEET
Panel Description:- Stainless steel-look finish panel designed for GigaSPEED X10D
F/UTP applications.
Cable Applications :- Suitable for 4pr 1291 range of F/UTP cables
Common Sizes:- Available in 24 ports
Tooling Required:- THE HGS620 closure hand tool is required to terminate these
modules. A small flat-blade screwdriver is required to remove
the modules from the panel.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 23
FACT SHEET
Category:- PowerSUM (CAT5E), T568A & T568B color coded . Jack
identified by gray separation board. Available in a range of
colors.
Cable Applications:- PowerSUM compliant cable i.e. x061 4pr. All pairs are
terminated on the top.
Tooling Required:- The 110D-Impact Tool on High Setting. Also can be terminated
using the Jack rapid Tool MPS100E version.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 24 SYSTIMAX Products
MGS400 Module
FACT SHEET
Category:- GigaSPEED XL (CAT6) T568A & T568B color coded. Jack
identified by red separation board. Jack is available in a range
of colors.
Tooling Required:- The 110D-Impact Tool on High Setting or the SYSTIMAX MGS
Module Jack Rapid Tool
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 25
MGS600 Module
FACT SHEET
Category:- GigaSPEED X10D (CAT6) T568A & T568B color coded. Jack
identified by blue color circuit board. Available in a range of
colors.
Description:- Differs from MGS400 with ‘Blue’ colored circuit board
Cable Applications:- GigaSPEED cable i.e. x091 range for GigaSPEED X10D
applications. Terminated 2 pairs through the holes at the rear
and 2 pairs on the top of the block.
Tooling Required:- The 110D-Impact Tool on High Setting or the SYSTIMAX MGS
Module Jack Rapid Tool
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 26 SYSTIMAX Products
FACT SHEET
Category:- GigaSPEED X10D F/UTP (CAT6A) T568A & T568B color
coded.
Description:- Special termination procedure with two parts being clamped
together. It is designed to fit in M-series faceplates, Keystone
faceplates and high density patch panels like the 360 F/UTP
panels. Adapters available depending on outlet type required.
Cable Applications:- GigaSPEED cable i.e. x291 range for GigaSPEED X10D F/UTP
applications
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 27
Blanking Plate
FACT SHEET
Cable Applications:- Suitable for all 4pr cables from SYSTIMAX range. Can also be
used for internal SYSTIMAX fiber terminations.
Additional Information:‐ This is a low profile box that has been designed to make it
ideal for consolidation point type applications. It has a slim
design being 203mm x 305mm x 38mm (8” x 12” x 1.5”)
allowing it to be installed in a variety of places, such as under
false floors, inside paneled furniture or even mounted on the
wall! The box utilizes four removable 6-way panels that can
take a variety of connectors including M series copper
modules, MGS600/MGS400 and MPS100E.
Being a universal ZWB, 6 way fiber panels can also be
supplied. These will hold the couplers for ST, SC and LC
connectors.
If using fiber terminations a fiber optic spool kit must be fitted
to allow the correct management of the fibers.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 28 SYSTIMAX Products
FACT SHEET
Cable Applications:- Suitable for all internal 4pr cables from the SYSTIMAX range.
Can also be used for internal SYSTIMAX fiber terminations. If
used for the GigaSPEED X10D Solution, high density MGS
caps must be fitted.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 29
M32CPP/100HCP Zone Wiring Box M48CCP Zone Wiring Block
FACT SHEET
Cable Applications:- Suitable for 4pr cables from SYSTIMAX range x061 or x071.
Can also be used for internal SYSTIMAX fiber terminations.
The M32CCP and M48CCP Boxes can be used for
GigaSPEED X10D installations providing the high density
caps are fitted.
Additional Information:- The M32 is 332mm x 355mm x 110mm (13” x 14” x 4.25”) and is
specifically designed for underfloor / plenum type
applications. The design includes a rectangular knock-out
85mm x 65mm (3.35” x 2.56”) to be used in conjunction with a
standard dual gang electrical box. In addition to this there are
12 x 19.5mm (3/4”) knockouts, 6 per side that can be used for
glands or conduit.
The box has one fire foam entrance and four fire foam exit areas
for plenum rated cables.
The M48CCP has the same dimensions as the MC32CPP box
above and is to the same specification. The space for the extra
16 ports available in this ZWB has been gained by utilizing the
full box for the terminations excluding the 110A termination
block
The design of the box allows up to 32 ports of various
configurations using M series type copper modules, fiber
connectors as well as providing a space for a 100pr 110A
copper panel.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 30 SYSTIMAX Products
FACT SHEET
Cable Applications:- Suitable for 4pr or 25pr multipair cables from SYSTIMAX
range. CAT3 applications only.
Tooling Required:- The 110D-Impact Tool on Low Setting
Additional Information:- This panel provides 50 ports in a single ‘1U’. Each port is
capable of carrying up to three voice pairs. Functional earth
facilities (where required ) can be simply catered for by
commoning any single pair across the panel.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 31
Faceplates
FACT SHEET
Information:- Faceplates vary between countries; with some the modules fit
directly to the rear and others require shutters. There are many
different varieties available in the SYSTIMAX range with flush
mount, surface mount and also designer faceplates for
furniture. Other options include 1, 2, 3, 4 or 6 ports and even
flexible varieties. Reference should be made to the product
guide as these differ from region to region.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 32 SYSTIMAX Products
PowerSUM Patchcords
FACT SHEET
Available Types:‐ D8PS – Modular to Modular
117PS – Open ended
See eCatalog
Additional Information The D8PS cord will for PowerSUM CAT5E or below. These are
available in a variety of lengths and colors, including open
ended, hybrid connectors, LSZH and also solid cable
construction if required.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 33
GigaSPEED Patchcords
FACT SHEET
Available Types:‐ GS8E – Modular to Modular
GS117 – Open ended
GS8H – LSZH
GS8MGS – Modular to MGS400
GS8E-SP Solid Plenum
GS8L – Solid LSZH
See eCatalog for full range
Additional Information:‐ GigaSPEED patchcords (CAT6 / XL) are high bandwidth cords
specially designed to support high performance system level
requirements built into the GigaSPEED XL cabling solutions.
The modular plugs apart from being easily identifiable with the
red insert, has an anti-snag feature making the cords easier to
use in the patch fields. There are many different versions
available including length, color and construction.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 34 SYSTIMAX Products
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
SYSTIMAX Products 1 - 35
Summary
SYSTIMAX is a ‘Brand’ name for a group of structured cabling
products. There are a large variety of options for both cables
and administration panels. All require termination to the
SYSTIMAX recommended standards and practices.
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014
ND3361
1 - 36 SYSTIMAX Products
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved. ND3361 September 2014