Академический Документы
Профессиональный Документы
Культура Документы
WEAR(MICROMETER)
together with outstanding chemical and good electrical 20
All the PTFE composite samples are influenced by the Fig.3 Comparison of wear vs sliding distance for 2kg
parameters: sliding distance and time. loading condition by eliminating pure PTFE.
Fig. 3 shows comparison of wear vs sliding distance for
Wear Behaviour 2kg loading condition by eliminating pure PTFE and it is
clearly seen that 25%Graphite+PTFE have minimum wear
9 rate (5µm) along with this 40% bronze+ PTFE also exhibit
8
PURE PTFE
25%CARBON+PTFE low wear rate as compare to other materials.
40%BRONZE+PTFE
25%GRAPHITE+PTFE
Friction Behaviour
7
PEEK The trends of the friction coefficients along the distance
WEAR(MICROMETER)
6
are shown in fig 4. At regime, there is relatively steady
5
friction coefficient in the sliding process even with the
4 presence of fillers. Under 0.5 Kg loading condition plain
3 PEEK exhibits more coefficient of friction and
2 40%Bronze+PTFE have minimum COF.
1
0.6
for wear rate under 0.5kg loading condition against the 0.2
sliding distance which gives that the pure PTFE have PURE PTFE
150
0.45
0.4
100
0.35
COEFF. OF FRICTION
50 0.3
0.25
0
0.2
0 500 1000 1500 2000
SLIDING DISTANCE PURE PTFE
0.15
0.3
0.25
COEFF. OF FRICTION
0.2
0.15
IV Conclusions