Академический Документы
Профессиональный Документы
Культура Документы
Centro de tecnologia - CT
MTR0305 - Propriedades físicas dos materiais
RADIAÇÃO
ELETROMAGNÉTICA
INTERAÇÕES DA
LUZ COM SÓLIDOS
POLARIZAÇÃO ELETRÔNICA
PROPRIEDADES ÓTICAS
E TRANSIÇÃO DE ENERGIA
DOS ELÉTRONS
METAIS
NÃO - METAIS
RADIAÇÃO
ELETROMAGNÉTICA
INTERAÇÕES DA LUZ
COM SÓLIDOS
POLARIZAÇÃO ELETRÔNICA E
TRANSIÇÃO DE ENERGIA DOS
ELÉTRONS
METAIS
https://www3.epa.gov/radtown/industrial-radiography.html
The radiograph image shows the condition of metal around a welding site. The
welding site shows up bright white because it is thicker than the rest of the
material. It has stopped the rays almost completely from passing through. The
cracks are the darker areas.
X-ray radiography devices are powered by electricity. When the device is turned
off, x-rays are not produced. X-ray radiography generally creates very clear
pictures. The devices are large and good for use in factories.
The gamma rays come from radioactive material inside the radiography device.
Gamma ray devices do not need electricity. They are smaller than x-ray devices.
Their small size makes them useful for checking inside pipes, ships and other
small spaces. However, they cannot be turned off like an x-ray device. The
radionuclides in the device always produce gamma rays. The only way to “turn
off” a gamma ray radiography device is to interrupt the beam by covering the
opening with a heavy metal plate. Workers must be careful to close the opening
when the gamma device is not in use to avoid exposure.
Onde: C = Velocidade da luz
λ = Comprimento de onda
= Frequência
RADIAÇÃO
ELÉTROMAGNÉTICA
INTERAÇÕES DA LUZ
COM SÓLIDOS
POLARIZAÇÃO ELETRÔNICA
E TRANSIÇÃO DE ENERGIA
DOS ELÉTRONS
METAIS
. Absortividade: A = IA/Io
. Refletividade: R = IR/Io
• Materiais transparentes;
• Materiais translúcidos;
• Materiais opacos.
POLARIZAÇÃO ELETRÔNICA E TRANSIÇÃO DE
ENERGIA DOS ELÉTRONS
RADIAÇÃO
ELÉTROMAGNÉTICA
INTERAÇÃO DA LUZ
COM SÓLIDOS
POLARIZAÇÃO ELETRÔNICA E
TRANSIÇÃO DE ENERGIA DOS
ELÉTRONS
METAIS
NÃO METAIS
APLICAÇÕES DOS
FENÔMENOS ÓTICICOS
NÃO METAIS
APLICAÇÕES DOS
FENÔMENOS ÓTICICOS
NÃO METAIS
APLICAÇÕES DOS
FENÔMENOS ÓTICOS
• Ou
;
Se a direção da luz se dá em uma
direção perpendicular à interface.
Espectro eletromagnético
• Ou ainda ;
ou
Ex.: Deseja-se que a refletividade da luz sob condições de incidência normal com a superfície de um
meio transparente seja menos de 5%. Quais dos seguintes materiais da tabela a seguir são possíveis
candidatos para tal: vidro de cal de soda, vidro Pyrex, periclase, espinélio, poliestireno e polipropileno?
Justifique as suas seleções.
• Ex.:
Técnica tradicional:
Adições de bismuto,
cádmio, cobalto, ouro, o
cobre e outros, à massa
de vidro em fusão.
Espectro eletromagnético
TRANSIÇÃO ELETRÔNICA
• Se:
• Logo:
IT = I0 (1 – R)² е –βl
Onde:
R = Refletância.
Logo:
• A fração de luz incidente que é transmitida através de um material
transparente depende das perdas que são incorridas pela absorção e
reflexão.
Espectro eletromagnético 2
• É consequência da absorção seletiva de faixas específicas de
comprimento de onda da luz.
LUMINESCÊNCIA
RADIAÇÃO
ELÉTROMAGNÉTICA • Alguns materiais são capazes de absorver energia
INTERAÇÃO DA LUZ e depois reemitir luz visível em um fenômeno
COM SÓLIDOS
POLARIZAÇÃO ELETRÔNICA E
conhecido por luminescência.
TRANSIÇÃO DE ENERGIA DOS
ELÉTRONS
METAIS
NÃO METAIS
APLICAÇÕES DOS
FENÔMENOS ÓTICOS
• Ou seja, diferentemente do que foi visto até agora, nos lasers uma luz
coerente é gerada por transições eletrônicas que são iniciadas por
um “estímulo externo”.
• O átomo de Cr é um sistema de
3 níveis.
FUNCIONAMENTO
FUNCIONAMENTO
a) Antes da excitação.
b) Excitação de alguns
átomos.
c) Emissão espontânea
de fótons.
d) Fótons continuam a
estimular emissões.
e) Emissão do feixe
coerente e intenso.
FUNCIONAMENTO
APLICAÇÃO
APLICAÇÃO
Lasers e suas aplicações
Velocidade
Densidade de informação