Вы находитесь на странице: 1из 5

KST2907A

KST2907A

General Purpose Transistor 3

SOT-23
1
1. Base 2. Emitter 3. Collector

PNP Epitaxial Silicon Transistor


Absolute Maximum Ratings Ta=25°C unless otherwise noted
Symbol Parameter Value Units
VCBO Collector-Base Voltage -60 V
VCEO Collector-Emitter Voltage -60 V
VEBO Emitter-Base Voltage -5 V
IC Collector Current -600 mA
PC Collector Power Dissipation 350 mW
TSTG Storage Temperature 150 °C

Electrical Characteristics Ta=25°C unless otherwise noted


Symbol Parameter Test Condition Min. Max. Units
BVCBO Collector-Base Breakdown Voltage IC= -10µA, IE=0 -60 V
BVCEO * Collector-Emitter Breakdown Voltage IC= -10mA, IB=0 -60 V
BVEBO Emitter-Base Breakdown Voltage IE= -10µA, IC=0 -5 V
ICBO Collector Cut-off Current VCB= -50V, IE=0 -0.01 µA
hFE DC Current Gain VCE= -10V, IC= -0.1mA 75
VCE= -10V, IC= -1.0mA 100
VCE= -10V, IC= -10mA 100
*VCE= -10V, IC= -150mA 100 300
*VCE= -10V, IC= -500mA 50
VCE (sat) * Collector-Emitter Saturation Voltage IC= -150mA, IB= -15mA -0.4 V
IC= -500mA, IB= -50mA -1.6 V
VBE (sat) * Base-Emitter Saturation Voltage IC= -150mA, IB= -15mA -1.3 V
IC= -500mA, IB= -50mA -2.6 V
fT Current Gain Bandwidth Product IC= -50mA, VCE= -20V 200 MHz
f=100MHz
Cob Output Capacitance VCB= -10V, IE=0, f=1.0MHz 8 pF
tON Turn On Time VCC= -30V, IC= -150mA 50 ns
IB1= -15mA
tOFF Turn Off Time VCC= -6V, IC= -150mA 110 ns
IB1=IB2= -15mA
* Pulse Test: PW≤300µs, Duty Cycle≤2%

Marking

2F

©2002 Fairchild Semiconductor Corporation Rev. A2, November 2002


KST2907A
Typical Characteristics

VBE(sat), VCE(sat)[V], SATURATION VOLTAGE


1000 -10
VCE = 10V

IC = 10 IB
hFE, DC CURRENT GAIN

-1 VBE(sat)

100

-0.1

VCE(sat)

10 -0.01
-1 -10 -100 -1000 -1 -10 -100 -1000

IC[A], COLLECTOR CURRENT IC[mA], COLLECTOR CURRENT

Figure 1. DC current Gain Figure 2. Collector-Emitter Saturation Voltage


Base-Emitter Saturation Voltage

12 1000
CURRENT GAIN BANDWIDTH PRODUCT

IE = 0
10
f = 1MHz VCE = -20V
Cob [pF], CAPACITANCE

8
fT[MHz],

6 100

0 10
-1 -10 -100 -1000
-1 -10 -100

VCB [V], COLLECTOR-BASE VOLTAGE IC[mA], COLLECTOR CURRENT

Figure 3. Output Capacitance Figure 4. Current Gain Bandwidth Product

©2002 Fairchild Semiconductor Corporation Rev. A2, November 2002


KST2907A
Package Dimensions

SOT-23

0.20 MIN
0.45~0.60
0.40 ±0.03

±0.10

±0.10
1.30

2.40
0.03~0.10

0.38 REF

0.40 ±0.03 +0.05


0.12 –0.023

0.96~1.14
2.90 ±0.10
0.97REF

0.95 ±0.03 0.95 ±0.03

1.90 ±0.03 0.508REF

Dimensions in Millimeters

©2002 Fairchild Semiconductor Corporation Rev. A2, November 2002


TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.

ACEx™ FACT™ ImpliedDisconnect™ PACMAN™ SPM™


ActiveArray™ FACT Quiet series™ ISOPLANAR™ POP™ Stealth™
Bottomless™ FAST® LittleFET™ Power247™ SuperSOT™-3
CoolFET™ FASTr™ MicroFET™ PowerTrench® SuperSOT™-6
CROSSVOLT™ FRFET™ MicroPak™ QFET™ SuperSOT™-8
DOME™ GlobalOptoisolator™ MICROWIRE™ QS™ SyncFET™
EcoSPARK™ GTO™ MSX™ QT Optoelectronics™ TinyLogic™
E2CMOS™ HiSeC™ MSXPro™ Quiet Series™ TruTranslation™
EnSigna™ I2C™ OCX™ RapidConfigure™ UHC™
Across the board. Around the world.™ OCXPro™ RapidConnect™ UltraFET®
The Power Franchise™ OPTOLOGIC® SILENT SWITCHER® VCX™
Programmable Active Droop™ OPTOPLANAR™ SMART START™

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body, device or system whose failure to perform can be
or (b) support or sustain life, or (c) whose failure to perform reasonably expected to cause the failure of the life support
when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to
result in significant injury to the user.

PRODUCT STATUS DEFINITIONS


Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative or In This datasheet contains the design specifications for
Design product development. Specifications may change in
any manner without notice.

Preliminary First Production This datasheet contains preliminary data, and


supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.

No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.

Obsolete Not In Production This datasheet contains specifications on a product


that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.

©2002 Fairchild Semiconductor Corporation Rev. I1


www.s-manuals.com

Вам также может понравиться