Академический Документы
Профессиональный Документы
Культура Документы
MEASURED WORKS
3 Supplying and Laying Plain Cement Concrete of Grade 1:3:6 with stone
B4 aggregate of 40mm down size (including centering & shuttering if
required) and with cement of approved make as specified in all levelling
courses under Foundation, Floors,rigid pavement, Pits,trenches etc., at
all heights / depths and floors including scaffolding, unless otherwise
specified as per Drawings and Specifications and instruction of the
Engineer.
Culvert Area 1.00 42.00 14.600 0.100 61.32
Ramp Area 2.00 100.00 14.600 0.100 292.00
21,541,683.28
CLIENT/EMPLOYER:
BOQ of RUB
21,541,683.28
graded hard stone broken stone (strength of concrete to be not less than
350 kg/sq.cm for 28 days cube), including supplying and mixing Super-
Plasticizer of approved brand/conforming to relevant IS Standard;
including placing of concrete,providing pockets,openings,PVC pipe
75mm Dia Weep holes, providing steel hooks for lifting etc, form work
in precasting, handling, hoisting, centering, erection, machinery,
chamfering wherever required etc., vibrating, tamping, curing and
rendering if reqd. to give a smooth and even surface etc. all complete
(excluding the cost of reinforcement) for all structures ( confirming to
IS 456 ) as per the drawings, specificatons and as directed by
Engineering incharge.
Culvert Raft 1.00 40.00 13.600 0.800 435.20
Culvert Wall 3.00 40.00 0.800 7.800 748.80
Culvert Slab 1.00 40.00 15.600 0.800 499.20
Sleeper 200.00 10.00 0.400 0.400 320.00
MISC. 1.00 10.00 5.000 5.000 250.00
111,944,439.28
CLIENT/EMPLOYER:
BOQ of RUB
111,944,439.28
12 Supply and Applying of paint over the Centerline / Edge line Road
R6 marking / speed breaker marking over speed breaker after applying
suitable primer over the concrete surface followed by applying
thermoplastic paint (manufactured by(Brand:Cataline & Reflexline or
equivalent approved by Engineer in-charge) (Hot application) white /
yellow by indigenous modern propeller road marking machine with a
single coat of 2.5mm thickness as directed by the Engineer in-charge
including cost and conveyance, all ingredients such as binder, Glass
beads 250gms per sqm, Titanium Dioxide, calcium carbonate. Inters
pillars, pigments as per MORTH specification of clause 803.4.2.2 for the
preparation of Thermoplastic requirements for glass beads shall be the
table No.800.4 of MORTH specification as per IRC-35 / 1997 including
cost of all other materials, labour charges for mixing the ingredients to
the require temperature, cleaning the road surface, pre marking,
Necessary advance, cautionary sign boards, Red flags, Traffic cones as
per traffic rules, safeguarding the newly painted center line marking as
directed by the Engineer in-charge. The work should be strictly carried
out to meet the requirements specified in EN 1436.
Approach Road & Culvert 600.00
120,699,109.28
CLIENT/EMPLOYER:
BOQ of RUB
120,699,109.28
G1 temporary staging and supporting work and making all structural steel
work in accordance with the approved drawing for trusses, purlins,
girders, brackets, etc. with connections using plates, channels and angles,
gusset plate, foundation bolt, cleats, fasteners etc., steel conforming to IS
226 and IS 2062 with minimum yield strength of 250Mpa.The rate of
steel work shall include assembly, welding, jointing, building up new
sections, cost of fasteners (nuts, bolts and washers) etc. The rate shall
also include one coat zinc rich primer & two coat of Synthetic enamel
paint of approved shade after properly cleaning the steel surface,
necessary bolts & washers for fixing including grouting of bolts with 1:3
non shrink cement grout etc., complete all as per drawings,
specifications etc. with all lead & lift for all materials & labour and as
directed, at all heights & locations
Misc. 25.000 25.00
T O T A L INR 123,674,109.28
Date, 03/08/2018
Quantity Surveyor
IRCLASS