Академический Документы
Профессиональный Документы
Культура Документы
Now BPSL is reckoned as a leading fully integrated Steel Company with State of the
Art manufacturing plants at Chandigarh, Kolkata and Orissa in India and overseas
business interests in Nepal, Nigeria, Ethiopia, Sudan, Senegal, Ghana, Benin and
Dubai.
BPSL have enjoyed prime position in its market segments due to its leadership in
manufacturing technology vis-à-vis product quality that had established acceptability
of its products amongst customers in automotive (OEMs), auto-ancillary, engineering
“The First who innovates has the and Government sectors. Due to this quality leadership, BPSL have been able to
reins of the game in his hands ….. develop and supply various products including the niche products for specific
customers and specific applications.
This however does not make us complacent. Our zeal to be ahead of competition
through technological upgradation for process improvements, maintaining and
advancing our quality leadership, development and introduction of improved and
value added products and continuously improving our service to our esteemed
customers would be the driving forces for our future developments and growth. I look
forward to long and mutually beneficial associations with our valued customers in this
journey.
To become one of the Largest and the Best Quality Producer of Pipes /Tubes in the
l
World.
To be
l the most preferred supplier of tubes Global Brand Leaders and become an
inseparable part of our customers' existence and growth through reliability,
excellence in quality and service.
'Team BPSL', would be passionate about business leadership, would thrive always
l
to be ahead of competition and in establishing best practices.
To our
l associates as long term partners in progress, be fair and transparent in our
dealings with them and always honour our commitments.
Sanjay Singal
2
ABOUT US
During four decades of existence Bhushan Power and Steel Ltd.(BPSL) has grown
in to a leading business house having diversified business interests in a range of
basic and value added products viz, DRI, PIG Iron, Billets, H.R. Coils, CR Coils,
GP / GC Sheets, Galvanized / Colour Coated Profiles, Precision Tubes, Black Pipe
& G.I. Pipes, Pre-Galvanised Pipe, Cable Tape and Special Alloy Steel Round Bars,
RCS Hexagons, Wire Rods and Bright Bars.
The distinctive characteristics of BPSL's philosophy - Customer focus – every customer is considered as
and growth strategy that have set BPSL ahead of its the most important partner in the supply chain
competitors are : focusing not only on product aspects but also on
- Acquire and assimilate world class manufacturing ways and means to minimize their inventory costs
technology. through reliable, just in time distribution.
- Strict adherence to quality standards. We consider our associates as long term partners in
progress, be fair and transparent in our dealings with
- Rigorous application of metallurgical analysis and
statistical process control techniques to ensure zero them and always honour our commitments.
product nonconformity. High quality, high technique and sincere service are
- Offer superior customer service for customer the unchanged target that we aim at.
delight.
3
MANUFACTURING PROCESS OF
PIPES (ROUND & SECTION)
The basic raw material for manufacturing of pipes is After removal of Burr each pipe is Hydraulically tested
HR Coils. After receiving the raw material in Coil to check the leakage in the pipe.
shape these are slitted into various widths according Various tests according to specifications are carried
to requirements of Pipe Dia at Slitting machine. out at the shop floor itself.
After slitting the slitted coil is loaded on the uncoiler
and stored in accumulator to enable the continuous
GALVANIZING & THREADING:
running of the mill while tail end of slit is welded with
the leading end of next coil with the help of MIG After hydraulic testing of pipes at 51kg/cm2 or as per
welding. customer requirement, the pipes are sent for
galvanizing process to avoid the rusting on the surface
The strip is passed through a set of rolls to get the
if required by the customer. The pipes are dipped in
shape and the outer edges of strip are heated by high
Hydro Chloric acid to remove the rust from the surface.
frequency induction coil. Outside flash of welding is
After cleaning the surface the pipe is washed in
removed with the help of round tool(Scarfing tool)so
running water. After washing the pipe is dipped in flux
as to give better finish. The welded tube is again
solution to maintain adherent property of zinc on pipe.
passed through a set of rolls to get the specified
The pipes are dipped in a molten zinc Bath at a
tolerances on outside Diameter. Inside flash of weld
temperature of 450oC to get the proper adherent
can also be removed if required by the customer above
Coating.
75mm outside Diameter. Our product Range is from
10.00mm NB to 200mm NB. After the pipes are made After Galvanizing the pipes are sent for threading
these are cut into the Required lengths with wherever it is required. The threading is done on the
Programming Logistic Controls (PLC). highly sophisticated machines to have the best
threading to avoid any leakage on threads while laying
After cutting the pipes the pipes are sent together to
in the use. After threading each pipe is marked with the
Deburring machine for removal of burr at the end to
series paint as required by BIS and bundled for
avoid any injury to the workmen.
dispatch.
4
PRODUCT PROFILE
ERW PIPES
MODERN LABORATRORY
5
TESTING AND QUALITY
CONTROL FACILITIES
Besides the numerous quality assurance measures during the manufacturing process and at various inspection
points, the following facilities are also utilized for ensuring stringent quality standards.
Eddy current testing machine (NDT) For On-Line flaw detection on welds
Vickers hardness tester (Digital) For checking micro & macro hardness on weld,
heat affected zone and base metal
Mandrels and Fixtures Reverse bend test, GBT, root bend test, face bend test
Impact test machine (charpy vnotch) For checking energy absorption test on base
metal, weld and heat affected zone
Apart from the above important testing machines, we have temperature recorders for seam normalizing,
automatic pressure recording for hydrostatic test pressure and many other sophisticated measuring
instruments.
The trained and committed work force ensures high quality of pipes made to various national and International
standards. The quality systems are reviewed from time to time by the various certification bodies to maintain
the effectiveness of the systems.
6
CREDENTIALS TO QUALITY
IS OUR IDENTITY
7
EQUALENT INTERNATIONAL STANDARDS
FOR VARIOUS INDIAN STANDARDS
Indian Standard American Standard British Standard Japanese Standard European Standard
IS 1161-2014 ASTM A500 BS 4360 JIS G3444/ 1994 EN 10219
GR A /1993 BS 7613/ 1994 --
IS-1239 ASTM A53/ 1993 BS 1387 / 1985 -- EN 10255
(Part 1) /2004 Elong.20% for all
Galv. 550Gms/m2
IS 9295 / 1983 ASTM A-513 BS 6323 / 1982 -- --
IS 9537 / II -- BS 4568 -- --
8
ERW PIPES
APPLICATIONS & SPECIFICATIONS
9
STEEL PIPES FOR ORDINARY USES
IN WATER, GAS, STEAM & AIR
Conforming to IS:1239 (Part-I) 2004
Nominal Bore Outside Diameter Wall Thickness NOMINAL WEIGHT METERS / TON
(N.B.) Minimum Maximum
Kg / Meters
*
MM INCH MM MM CLASS MM SWG P.E. S&S P.E. S&S
TOLERANCE
10
11
HOLLOW STEEL SECTIONS FOR STRUCTURAL USE
SQUARE HOLLOW SECTION (SHS)
Conforming to IS : 4923 – 1997
*
SHS (DxB)* THICKNESS UNIT SHS (DxB) THICKNESS UNIT
WEIGHT WEIGHT
MM MM Kg/Meter Meter/Ton MM MM Kg/Meter Meter/Ton
15 X 15 1.20 0.53 1900 80 X 80 3.20 7.51 133
1.60 0.69 1455 4.00 9.22 108
2.00 0.84 1190
19 X 19 2.00 0.99 1010 5.00 11.27 89
Note: Min.% Elongation: 10% for GR. Yst 310, 15% for GR.
Yst 240 & 20% for Yst 210
e: The sizes which are not covered in the Table can also be
supplied as per customer requirement (Clause – 8.1)
* D : Depth
B : Breadth
12
13
HOLLOW STEEL SECTIONS FOR STRUCTURAL USE
RECTANGULAR HOLLOW SECTION (RHS)
14
GROOVED PIPE
15
STEEL PIPES FOR
STRUCTURAL PURPOSE
Confirming to IS : 1161 - 2014
Nominal Outside Nominal Weight
Size NB Diameter Thickness Black Tubes
D T Plain End
MM INCH MM MM SWG Kg/Meter Meter/Ton
16
SPECIFICATIONS OF STEEL PIPES
FOR WATER AND SEWAGE
Conforming to IS : 3589 - 2001
Nominal OutsideDiameter Wall Thickness Calculated Weight
N.B. Size
MM INCH MM MM Kg/m Mtr/Tonne
150 (6”) 168.30 2.60 10.60 94.30
168.30 3.20 12.00 83.30
168.30 4.00 16.21 61.70
168.30 5.00 20.14 49.66
168.30 6.00 24.01 41.64
168.30 7.00 27.84 35.91
175 (7”) 193.70 4.00 18.71 53.44
193.70 5.00 23.27 42.97
193.70 6.00 27.77 36.01
193.70 7.00 32.23 31.03
200 (8”) 219.10 2.60 13.88 72.00
219.10 3.60 19.13 52.27
219.10 4.00 21.22 47.13
219.10 5.00 26.40 37.88
219.10 5.40 28.46 35.14
219.10 6.00 31.53 31.72
219.10 7.00 36.61 27.31
TOLERANCE
Outside Diameter: +/- 0.75% of OD
Thickness: +/- 10%
Ovality: Shall not exceed 1% of the specified diameter
Bead Height: The maximum height of the weld bead on the internal surface of the
pipes shall not exceed 60% of nominal wall thickness
Straightness: Shall not deviate from the straightness by more than 0.2% of total length
Length: Single random length of 4 to 7 meter
PHYSICAL PROPERTIES
Grade Yield Stress Tensile Strength %elongation
Mpa(Min) Mpa(Min) (Min)
Fe-330 195 330 20
Fe-410 235 410 18
Fe-450 275 450 15
The sizes which are not covered in the Table can also be supplied as per
customer requirement (Clause – 11.1)
17
18
CARBON STEEL TUBES FOR
MECHANICAL & GENERAL ENGINEERING
Conforming to IS: 3601 - 2006
Area of
Outside cross Moment of Modules of Radius of
Diameter Thickness Mass Section Inertia Sections Gyration
mm mm Kg/m cm 4 cm4 cm3 cm
1.80 0.866 1.10 0.53 0.50 0.69
2.00 0.952 1.21 0.57 0.54 0.69
21.30
2.60 1.20 1.53 0.68 0.64 0.67
3.20 1.43 1.82 0.77 0.72 0.65
1.80 1.11 1.42 1.12 0.83 0.89
2.00 1.23 1.56 1.22 0.91 0.88
26.90 2.30 1.40 1.78 1.36 1.01 0.87
2.60 1.56 1.98 1.48 1.10 0.86
3.20 1.87 2.38 1.70 1.27 0.85
2.00 1.56 1.99 2.51 1.49 1.12
2.30 1.78 2.27 2.81 1.67 1.11
33.70 2.60 1.99 2.54 3.09 1.84 1.10
3.20 2.41 3.07 3.60 2.14 1.08
4.00 2.93 3.73 4.19 2.49 1.06
2.30 2.27 2.90 5.85 2.76 1.42
2.60 2.55 3.25 6.46 3.05 1.41
42.40 3.20 3.09 3.94 7.62 3.59 1.39
3.60 3.44 4.39 8.33 3.93 1.38
4.00 3.79 4.83 8.90 4.24 1.36
2.30 2.61 3.32 8.80 3.64 1.63
2.60 2.93 3.73 9.77 4.05 1.62
2.90 3.25 4.14 10.70 4.43 1.61
48.30
3.20 3.56 4.53 11.59 4.80 1.60
3.60 3.97 5.05 12.69 5.25 1.59
4.00 4.37 5.57 13.77 5.70 1.57
2.30 3.29 4.19 17.65 5.85 2.05
2.60 3.70 4.71 19.64 6.51 2.04
2.90 4.11 5.23 21.59 7.16 2.03
60.30 3.20 4.51 5.74 23.47 7.78 2.02
3.60 5.03 6.41 25.87 8.58 2.01
4.00 5.55 7.07 28.15 9.34 2.00
4.50 6.19 7.89 30.90 10.20 1.98
2.60 5.24 6.00 40.57 10.66 2.60
2.90 5.75 6.67 44.74 11.76 2.59
3.20 6.44 7.33 48.78 12.80 2.58
76.10
3.60 7.11 8.20 54.01 14.20 2.57
4.50 7.95 10.10 65.12 17.10 2.54
5.00 8.77 11.16 70.87 18.63 2.52
2.90 6.15 7.83 72.47 16.30 3.04
3.20 6.76 8.62 79.21 17.80 3.03
4.00 8.38 10.70 96.34 21.70 3.00
88.90
5.00 10.30 13.20 116.40 26.20 2.97
5.40 11.10 14.00 123.80 27.80 2.97
5.60 11.50 14.65 127.64 28.72 2.95
3.60 8.70 11.10 133.20 26.20 3.47
101.60 4.00 9.63 12.30 146.20 28.80 3.45
5.00 11.90 15.20 177.50 34.90 3.42
19
Area of
Outside cross Moment of Modules of Radius of
Diameter Thickness Mass Section Inertia Sections Gyration
mm mm Kg/m cm4 cm4 cm3 cm
3.20 8.77 11.16 172.33 30.15 3.93
3.60 9.83 12.50 192.00 33.60 3.92
114.30 4.50 12.20 15.50 234.30 41.00 3.89
5.40 14.50 18.50 274.50 48.00 3.86
6.30 16.80 21.20 315.00 55.10 3.83
3.60 12.10 15.38 356.36 51.02 4.81
4.00 13.40 17.04 392.57 56.20 4.80
4.50 15.00 19.10 437.20 62.60 4.78
5.00 16.60 21.20 480.50 68.80 4.77
139.70 5.40 17.90 22.80 514.50 73.70 4.75
6.30 20.70 26.30 591.00 84.70 4.73
4.50 16.40 20.90 572.20 75.10 5.23
5.00 18.20 23.20 629.50 82.60 5.21
152.40 5.40 19.60 24.90 674.50 88.50 5.20
4.50 17.80 22.70 732.60 88.70 5.68
5.00 19.70 25.10 806.60 97.70 5.66
5.40 21.20 27.10 864.70 105.00 5.65
165.10 6.30 24.80 31.40 992.00 120.00 5.63
4.00 16.20 20.64 696.87 82.81 5.81
4.50 18.20 23.20 777.20 98.40 5.79
5.00 20.10 25.70 855.80 102.00 5.78
5.40 21.70 27.60 917.70 109.00 5.76
6.30 25.20 32.10 1053.00 125.00 5.73
168.30 7.10 28.20 35.94 1169.66 139.00 5.70
8.00 31.60 39.70 1288.00 153.00 5.69
5.00 23.30 29.60 1320.00 136.00 6.67
5.40 25.10 31.90 1417.00 146.00 6.66
193.70 5.90 27.30 34.80 1536.00 159.00 6.64
6.30 29.10 37.00 1600.00 165.00 6.60
8.00 36.60 46.30 2004.00 207.00 6.57
4.50 23.80 30.32 1746.18 159.40 7.59
5.00 26.40 33.60 1928.00 176.00 7.57
219.10 5.60 29.50 37.60 2142.00 195.00 7.56
6.30 33.10 42.00 2404.00 219.00 7.54
8.00 41.60 52.00 1940.00 268.00 7.52
20
PRECISION TUBES
MANUFACTURING PROCESS
OF PRECISION TUBES
The Process of Tube making initiates with forming of Cold procured from MTM, Italy, which is designed to clean cut
Rolled Steel Strips in tubular shape and subsequently the tubes at a speed of 150mtr./minute. The tubes are tested,
welding the edges under pressure by induction heating. Hot oiled, packed and are dispatched to various
Rolled Strips subjected to Cold Rolling to close tolerances is customers/warehouses located all over India.
the basic raw material for the manufacturing of Precision
To meet the requirement of our customers spread
ERW Tubes. These strips are procured from our Odisha
throughout the country, manufacturing units have been
plant having latest facilities for production of Hot Rolled /
established at Odisha, Chandigarh, Bengaluru & Kolkatta.
Cold Rolled Steel.
At Present we have the production capacity of 25000
The tube mill has series of forming rolls to shape the Cold MT/Month being produced by 15 Tube Mills, procured
Rolled strips progressively in tubular form, followed by from most reliable tube mill machinery makers like
edge welding by high frequency induction welding using Kusakabe and MTM, Italy with latest technology covering
solid state welder from THERMATOOL USA. The welded the wide range of OD- 6mm to 127mm & Thickness-
tube is cooled to normal temperature by coolant sprays, 0.25mm to 5.5mm. Further addition of new tube Mills are
passing through sizing rolls, straightened and automatically likely to be commissioned in future covering the entire tube
cut off to rquired length by Cold saw flying cutting machine, requirement.
SALIENT FEATURES
lThe cold saw flying cutting machine, procured from
MTM, Italy, has capacity to cut the online tubes within
+/- 1.50mm with straight end (90 Degree) and clean
cut.
lEddy Current Testing system from FLAWMARK-EC
to ensure surface and weld defects free tubes.
lRe Cut Cum End facer machines from SOCO, Taiwan
for smaller cut lengths with cutting accuracy of +/-
0.5mm.
lWire Brush Machine: To clean tube ends burr's
thorougly.
lMicro Alloy Tube: Developed special grade high
tensile strength tube, which can achieve up to 20%
weight/thickness reduction and still making the tube
more stronger, in turn saves on cost and weight
reduction of the Auto vehicle and there by increasing
fuel efficiency.
lInternal fin cutting in tube OD 19.05mm and above.
21
QUALITY CONTROL CUTTING SECTION
With a commitment to Continual Quality The cut to length requirements in the range of 40mm to
Improvement, we strive for quality in all our actions, to
2000mm are accomplished with SOCO cutting
achieve our goal of full customer satisfaction. Use of machines procured from Taiwan. With the capability
best quality material from our steel plant, state-of-the-
to memorize parameters for both single and
art technology and prescribed quality control tests multibatch cutting, these machines not only cut in
make it happen. close tolerence of +/- 0.5mm but also ensure end facing
of the tube from outside as well as inside. Wire
The tube division is fully equipped with the advanced brushing is also available for deburring tubes requiring
integrated quality control system to produce tubes 90 degree straight cut with further facility to cut
matching the national and international standards. The desired taper angle too.
quality control system is backed by an advanced
testing laboratory for physical, metallurgical and
chemical tests. The laboratary is equipped with:
TOOL ROOM
Spectrometer
l for determining chemical/
Metallurgical composition.
Universal Testing Machine.
l Highly sophisticated Tool Room equipped with C.N.C
Erichson Testing machine.
l
machines like, Roll profile, Saw Blade sharpening etc.
Vicker’s Hardness Tester and Rockwell Hardness
l
Tester.
Online Eddy current Tester for weldability defects
l
detection.
Hydraulic Press For Weld Ability Test.
l
22
PRECISION STEEL TUBES
Handle Bar
Shock
Absorber Main Frame
Front Forks
Saree Guard
ERW
Axle Shaft
Propeller Shaf
Steering Column
Hydraulic Tubes
Cross Member
APPLICIATIONS ATTRIBUTES
FRAME FOR TWO WHEELERS EASE OF APPLICATION
HANDLE BAR & LEG GUARD HIGH STRENGTH
SEAT SURFACE FINISH
MAIN STAND BENDABILITY
BRAKE PEDAL FLARING APPLICATIONS
DEAD AXLES
STANDARDS WE FOLLOW
STEELS WE USE IS 3074-2005 (Automobile application)
SAE 1008, SAE 1010, SAE 1020 JIS G 3445 : 1996 (Carbon Steel)
IS 513 D, DD, EDD, IF Tubes for Machine Structural appliciation
ST 37, ST 44, ST 52.3 ASTM A513
E235, E215, E355, E195 among others. Customer Specification
23
SPECIFICATIONS
Sno APPLICATION GRADE CHEMICAL COMPOSITION (%AGE) MECH.PROPERTIES(MIN.) WELD TEST DIMENSIONAL TOLERANCES(mm)
EQUIVALENT
INDIAN INTERNATIONAL C Mn S P UTS YS %ELG. FLARING FLATENING BENDING CONDITION 00 t
STANDARD STANDARDS Max. except where range is given kgf/mm2 kgf/mm2 S.650Ao Min. Min.
1 STEEL TUBE FOR BICYCLE AND ALLIED
PURPOSES
IS:2039/1991 BS:1717 ERWC1 0.15 0.60 0.06 0.06 30.60 20.40 10.00 12.00% 3t UPTO 30.00 OD +0.03
-0.13
ERWC2 0.20 0.90 0.05 0.05 40.80 30.60 8.00 10.00% 5t 30.00-44.50 +0.06
-0.14
ERWC3 0.25 1.20 0.05 0.05 43.90 35.70 8.00 8.00% 8t
24
PRECISION TUBE – ROUND (METER/TON)
Thickness
0.25 0.30 0.35 0.40 0.45 0.52 0.61 0.71 0.81 0.91 1.02 1.22 1.42 1.63 2.03 2.34 2.64 3.00 3.25 3.50 3.90 4.20 4.60 5.20 5.50
OD
6.00 16241 14235 12337 10800 9649 8757 7985 6956
8.00 11939 10429 8998 7837 6965 6287 5697 4904
8.80 12072 10795 9421 8119 7062 6268 5650 5112 4386
9.53 17484 14649 12625 11107 9927 8658 7455 6477 5743 5171 4673 4001 3522 3150
10.00 16641 13939 12010 10563 9439 8228 7082 6150 5449 4904 4428 3787 3329 2973 2507
11.00 15093 12636 10882 9567 8544 7443 6400 5552 4914 4418 3985 3400 2982 2656 2228
12.00 13809 11556 9948 8742 7804 6795 5838 5060 4475 4019 3622 3084 2700 2400 2004
12.70 13032 10904 9384 8245 7358 6404 5500 4765 4212 3781 3405 2896 2532 2248 1873
14.00 11800 9869 8490 7456 6652 5787 4966 4299 3797 3405 3064 2602 2271 2012 1669 1487 1353
15.00 11000 9198 7911 6946 6195 5387 4621 3998 3529 3164 2845 2413 2103 1861 1541 1369 1243
15.88 10381 8678 7463 6551 5842 5079 4355 3766 3323 2978 2676 2268 1975 1746 1443 1280 1160 1050
16.20 10173 8504 7312 6418 5723 4975 4265 3688 3254 2915 2620 2220 1933 1708 1410 1251 1133 1024
17.25 9544 7977 6858 6018 5365 4663 3996 3454 3046 2728 2450 2074 1805 1593 1313 1163 1052 949
18.25 9014 7533 6475 5681 5064 4400 3770 3257 2871 2571 2308 1952 1697 1497 1232 1090 984 887
19.05 8630 7211 6198 5437 4846 4210 3606 3115 2745 2457 2206 1865 1620 1429 1174 1037 936 842
20.00 6863 5898 5174 4611 4004 3429 2962 2610 2335 2095 1770 1537 1355 1112 982 885 795
21.20 6469 5558 4875 4344 3772 3230 2788 2456 2197 1971 1664 1444 1272 1042 919 828 743
22.23 6166 5297 4645 4139 3593 3076 2655 2338 2091 1875 1583 1373 1208 989 872 784 703 658
23.42 5848 5024 4405 3924 3406 2915 2516 2215 1980 1775 1498 1298 1142 934 822 739 662
24.20 5657 4859 4261 3795 3294 2819 2432 2141 1914 1716 1447 1254 1103 901 793 713 638
25.40 5387 4627 4056 3613 3135 2682 2314 2037 1820 1631 1375 1191 1047 855 752 675 604 563 529 484
26.70 4398 3856 3434 2980 2549 2198 1934 1728 1549 1305 1130 993 810 712 639 571 532 500 456 429
26.99 4350 3814 3396 2947 2521 2174 1913 1709 1531 1290 1117 981 801 703 631 564 526 493 450 424
27.70 4237 3715 3308 2870 2455 2117 1862 1664 1491 1256 1087 955 778 684 613 547 510 479 437 411
28.58 4105 3599 3204 2780 2377 2050 1803 1611 1443 1215 1052 923 753 661 592 529 493 462 421 396
30.00 3050 2646 2263 1951 1716 1532 1372 1155 999 877 714 627 562 501 467 437 398 374
31.75 2880 2498 2135 1841 1619 1445 1294 1089 942 826 672 589 528 470 438 410 373 351
32.30 2830 2455 2098 1809 1590 1420 1271 1070 925 811 660 579 518 461 430 402 366 344
33.34 2741 2377 2032 1751 1539 1374 1230 1035 895 785 638 559 500 446 415 388 353 331
34.00 2687 2330 1992 1716 1509 1347 1206 1014 877 769 625 548 490 436 406 380 346 324
34.93 2614 2267 1938 1670 1468 1310 1173 986 852 747 607 532 476 423 394 369 335 314
38.10 2394 2076 1774 1528 1343 1199 1072 902 779 682 554 485 433 385 358 335 304 285 263 237
40.00 2279 1976 1688 1454 1278 1140 1020 857 740 649 526 460 411 365 340 318 288 270 249 224
41.28 2208 1914 1635 1408 1237 1104 988 830 717 628 509 445 398 353 328 307 278 260 240 216
42.70 1580 1361 1195 1067 954 802 692 606 491 430 384 341 316 296 268 251 231 208
44.45 1517 1306 1148 1024 916 769 664 581 471 412 367 326 303 283 256 240 221 199
47.70 1412 1216 1068 953 852 715 617 540 438 382 341 302 281 262 237 222 205 184
48.10 1400 1206 1059 945 845 709 612 536 434 379 338 300 278 260 235 220 203 182
50.80 1325 1141 1002 893 799 671 578 506 410 358 319 283 262 245 222 207 191 171
54.00 751 630 543 475 384 336 299 265 246 229 208 194 179 160
55.56 915 816 729 612 528 461 373 326 290 257 239 223 201 188 173 155
57.15 889 793 708 594 513 448 363 316 282 250 232 216 195 182 168 150
60.30 842 751 671 563 485 424 343 299 266 236 219 204 184 172 158 142
63.50 799 712 636 534 460 402 325 283 252 223 207 193 175 163 150 134 127
65.00 622 521 449 393 317 277 246 218 202 188 170 159 146 130 124
69.95 577 484 417 364 294 256 228 202 187 174 157 147 135 120 114
76.20 529 443 382 334 269 235 209 185 171 159 144 134 123 110 104
81.00 497 417 359 314 253 220 196 173 161 150 135 126 115 103 98
88.90 379 327 285 230 200 178 157 146 136 122 114 105 93 88
96.00 351 302 264 213 185 165 145 135 125 113 105 96 86 81
101.00 333 287 250 202 176 156 138 128 119 107 100 91 81 77
108.00 311 268 234 189 164 146 129 119 111 100 93 85 76 72
111.50 226 183 159 141 125 115 107 97 90 82 73 70
114.30 221 178 155 138 121 112 105 94 88 80 71 68
120.60 209 169 147 130 115 106 99 89 83 76 68 64
127.00 198 160 139 124 109 101 94 84 79 72 64 61
25
PRECISION TUBE – SECTION (METER/TON)
Thickness
0.25 0.30 0.35 0.40 0.45 0.50 0.61 0.71 0.81 0.91 1.02 1.22 1.42 1.63 2.03 2.34 2.64 3.00 3.25 3.50 3.90 4.20 4.60 5.20 5.50
OD
10 x 10 13032 10904 9384 8245 7358 6404 5500 4765 4212 3781 3405 2896 2532 2248
12 x 12 10381 8678 7463 6551 5842 5079 4355 3766 3323 2978 2676 2268 1975 1746
15 x 15 8630 7211 6198 5437 4846 4210 3606 3115 2745 2457 2206 1865 1620 1429 1174
20 x 10 7211 6198 5437 4846 4210 3606 3115 2745 2457 2206 1865 1620 1429 1174 1037
19 x 19 5848 5024 4405 3924 3406 2915 2516 2215 1980 1775 1498 1298 1142 934 822
25 x 12 4405 3924 3406 2915 2516 2215 1980 1775 1498 1298 1142 934 822
20 x 20 4056 3613 3135 2682 2314 2037 1820 1631 1375 1191 1047 855 752
25 x 15 4056 3613 3135 2682 2314 2037 1820 1631 1375 1191 1047 855 752
21 x 21 3814 3396 2947 2521 2174 1913 1709 1531 1290 1117 981 801 703
30 x 15 3599 3204 2780 2377 2050 1803 1611 1443 1215 1052 923 753 661
27 x 20 3426 3050 2646 2263 1951 1716 1532 1372 1155 999 877 714 627 562 501
25 x 25 3235 2880 2498 2135 1841 1619 1445 1294 1089 942 826 672 589 528 470 438 410 373
30 x 20 2498 2135 1841 1619 1445 1294 1089 942 826 672 589 528 470 438 410 373 351
32 x 19 2498 2135 1841 1619 1445 1294 1089 942 826 672 589 528 470 438 410 373 351
30 x 30 1528 1343 1199 1072 902 779 682 554 485 433 385 358 335 304 285
40 x 20 1528 1343 1199 1072 902 779 682 554 485 433 385 358 335 304 285
38 x 25 1454 1278 1140 1020 857 740 649 526 460 411 365 340 318 288 270
40 x 25 1408 1237 1104 988 830 717 628 509 445 398 353 328 307 278 260
40 x 30 1306 1148 1024 916 769 664 581 471 412 367 326 303 283 256 240
50 x 20 1306 1148 1024 916 769 664 581 471 412 367 326 303 283 256 240
50 x 25 1206 1059 945 845 709 612 536 434 379 338 300 278 260 235 220
38 x 38 1193 1048 935 836 702 605 530 429 375 334 297 275 257 233 218
40 x 40 1141 1002 893 799 671 578 506 410 358 319 283 262 245 222 207
50 x 30 799 671 578 506 410 358 319 283 262 245 222 207
45 x 45 708 594 513 448 363 316 282 250 232 216 195 182
50 x 40 708 594 513 448 363 316 282 250 232 216 195 182
60 x 30 708 594 513 448 363 316 282 250 232 216 195 182
50 x 50 636 534 460 402 325 283 252 223 207 193 175 163
60 x 40 636 534 460 402 325 283 252 223 207 193 175 163
70 x 30 636 534 460 402 325 283 252 223 207 193 175 163
75 x 25 636 534 460 402 325 283 252 223 207 193 175 163
60 x 60 529 443 382 334 269 235 209 185 171 159 144 134 123
80 x 40 529 443 382 334 269 235 209 185 171 159 144 134 123
75 x 75 353 304 265 214 186 165 146 135 126 114 106 97 86 82
100 x 50 353 304 265 214 186 165 146 135 126 114 106 97 86 82
80 x 80 330 284 248 200 174 155 137 126 118 106 99 91 81 76
115 x 60 302 260 227 183 159 141 125 115 107 97 90 83 73 70
90 x 90 293 252 220 178 154 137 121 112 104 94 87 80 71 68
100 x 100 263 227 198 159 139 123 109 101 94 84 78 72 64 61
26
GLOBAL PRESENCE
OF OUR PRODUCTS
Please contact us :
27
Bhushan Power & Steel Ltd.
F-Block, 1st Floor, International Trade Tower, Nehru Place
New Delhi -110019 INDIA
www.bpsl.net
T +91 (0)11 30451000 l F +91 (0)11 26282737