oN CXA2165Q
CRT DRIVER
Description
‘The CXA2165Q is a bipolar IC which integrates base- 64 pin QFP (Plastic)
band Y/G signal processing, RGB signal processing,
horizontal sync signal processing that supports
28/31.5/33,75/37.9/45kHz, and a vertical deflection
circuit that supports 50/60/100/120Hz into a single
chip.
This IC has been developed for DTV, and realizes
the configuration of a high-end TV system that
supports 960i, 1080i, 720p, etc. in addition to 480i.
Features
+ 12C bus supported
+ YCbCr input offset adjustment circuit
+ LTIand CTI circuits
* Sharpness f0 switching circuit that supports band width of various input sources
* Color (Cr signal) dependent sharpness circuit
* Coring circuit for VM signal
+ AKB system
* Various ABL functions
* Two sets of analog RGB inputs
* Horizontal syne processing that supports 28/31.5/38.75/37.9/45kHz
* Vertical defiection circuit that supports 50/60/100/120Hz
* Quick responsed VAGC when switching channels ete.
* Deflection compensation circuit capable of supporting various wide modes
* For flat-TV suitable various VSAW waveform and parabola output
Applications
Color TVs (4:3, 16:9)
Structure
Bipolar silicon monolithic IC
Absolute Maximum Ratings (Ta = 25°C)
* Supply voltage ; Voc -0.3 to +10 v
* Operating temperature Topr -20 to +75 °C
* Storage temperature Tstg -65 0 +150 °c
+ Allowable power dissipation Po 17 w
(when mounted on a 50mm x 50mm board)
* Voltages at each pin -0.3 to Vec9, Vec_OUT +03 V
Operating Conditions
Supply voltage Voc8, Vec_OUT 9.0#0.5 v
za . . Voc’ 5.00.25 v
‘Sony reserves the right to change products and spectications without prior notice. This information does not convey any license by
‘ny implication or otherwise under any patents or ether right. Application circuits shown, if any, are typical examples illustrating the
‘operation of the devices. Sony cannot assume resporsibiily for any problems arising out othe use of these circus,
= 02259SONY
Package Outline Unit: mm
64PIN QFP (PLASTIC)
23.9204
404
PACKAGE STRUCTURE
PACKAGE MATERIAL | EPOXY RESIN
‘SONY CODE (GFP-6sPLoT LEAD TREATMENT
EIA) CODE PLOFR6A1420-10_ LEAD MATERIAL ‘COPPER ALLOY
JEDEC CODE: pacnasewass | 1.69
-90-
OxAz1650
Sony Corporation