Академический Документы
Профессиональный Документы
Культура Документы
CONTENTS
1. Theory of Operation
1. Paper Jam at First Paper Feed Area ..................................................................... 1
2. Paper Jam at Paper Receiving Area ..................................................................... 2
3. Print Start Timing Chart ......................................................................................... 3
4. During the Printing Timing Chart ........................................................................... 4
5. Print Stop Timing Chart ......................................................................................... 5
MEMO
1. Theory of Operation
1. Paper Jam at Paper Feed Area
1. Paper recieving sensor
> Paper recieving sensor[D] checks for paper every time the Drum angle at 334 and 104 turn
from the Position-A during printing.
> If the Paper recieving sensor does not detect paper either angle at Drum 334 nor 104,
the machine assumes paper has jammed at the paper feed area and displays message [J 2].
Drum 334 Drum 104 Drum 334 Drum 104
Main motor ON
ON
Position-A sensor
Blocked Blocked
A:If the Paper recieving sensor does not detect any paper at Drum angle from 334 to 104, the machine
assumes paper jam occurred and displays [J 2].
E
NORMAL PAPER FEED
A D
Main motor ON
Position-A sensor
Looks at the paper
Paper receiving
sensor Open
Paper Detected
A
A: Paper recieving sensor does not detect the paper at the drum angle from 257 to 280.
Paper stays under the Paper receiving sensor from Drum position at 257 to 280.
The paper has stuck on the suction unit or stuck with the separator.
OVERSEAS TECH. DEPT. WEB SITE
RISO KAGAKU CORPORATION 9-2
KS Series (Version 3.1)
Riso WEB Version
PAPER JAM
THEORY OF OPERATION
30 60 rpm
Main motor ON 90 rpm
rpm Detection
Paper receiving No detection 1st
sensor paper
Timing clutch 3 ON 4
Separation fan ON
Suction fan
1. 60 rpm: 66.3 / 90 rpm: 63.7
2. 60 rpm: 144.8 / 90 rpm: 142.2
3. 60 rpm: 160.3 / 90 rpm: 157.7
4. 60 rpm: 61.3 / 90 rpm: 58.7
1. When the drum angle becomes 66.3 or 63.7 degrees, the Paper feed clutch is turned ON.
2. When the drum angle becomes 144.8 or 142.2 degrees, the Paper feed clutch is turned OFF.
3. When the drum angle becomes 160.3 or 157.7 degrees, the Timing clutch is turned ON.
4. When the drum angle becomes 61.3 or 58.7 degrees, the Timing clutch is OFF.
Main motor
1. J 2 2. J 3 ON Detection
Paper receiving
sensor Detection Detection
Timing clutch ON ON ON
Separation fan
Suction fan
Count of A Count of B
Total counter
count
1. The Paper receving sensor checks whether the paper feeding is correct or not.
If the Paper receiving sensor does not detect paper at Drum angle 334 and 104 , the machine assumes
that the paper jam has occurred in the paper feeding area and indicates the message [J 2].
2. The Paper receving sensor checks whether the paper feeding is correct or not.
If the Paper receiving sensor detects paper at Drum angle 257 and 280 , the machine assumes
that the paper jam has occurred in the paper receiving area and indicates the message [J 3].
Drum angle
1
Blocked Blocked Blocked
Position-A sensor
2 3 4
Main motor ON 60 or 90 rpm 15 rpm 1.95 rpm OFF
Separation fan
Suction fan ON OFF
Total counter
count
(Count of the last paper)
1 When the Paper receiving sensor changes from "detecting ( the drum at 334 and 104 ) " to "not
detecting" (the drum angle at 257 and 280 ), the count signal is activated and the print quantity display
on the Panel
is decreased by one count and the Copy counter count goes up one count.
If at this time the print quantity display on the Panel becomes zero "0" or the STOP key is pressed, the
print stop movement starts from the next Drum position-A.
2 When the next Drum position-A is detected, the Drum rotation speed becomes 15 rpm to be ready for
the stopping the Drum rotation.
3 The Drum rotation speed becomes 1.95 rpm at Drum angle 315 .
MEMO