0 оценок0% нашли этот документ полезным (0 голосов)
13 просмотров1 страница
Side reinforcement bars are required in beams with a total depth of 1000 mm or greater according to EC2 Section 7.3.3(3) to control cracking. These side bars are placed in the side faces of deep beams.
Side reinforcement bars are required in beams with a total depth of 1000 mm or greater according to EC2 Section 7.3.3(3) to control cracking. These side bars are placed in the side faces of deep beams.
Side reinforcement bars are required in beams with a total depth of 1000 mm or greater according to EC2 Section 7.3.3(3) to control cracking. These side bars are placed in the side faces of deep beams.
To control cracking in beams with a total depth ≥ 1000 mm, side bars are provided in the side faces of the beam as per BS EN 199211:2004 Section 7.3.3(3).
A Short Guide to the Types and Details of Constructing a Suspension Bridge - Including Various Arrangements of Suspension Spans, Methods of Vertical Stiffening and Wire Cables Versus Eyebar Chains