Академический Документы
Профессиональный Документы
Культура Документы
Standard Specifications
● Range : 0.37kW to 7.5 kW
(0.5 HP to 10.0 HP).
● Supply : 415V, 3 Phase,
50Hz, AC.
● Pipe Size : 32 x 32 mm to
100 x 100 mm.
● Total head : Upto 30 metres.
● Capacity : Upto 1400 LPM.
● Liquid : Clear water.
Crompton Greaves Vertical In-Line ● Rotation : Anti-clockwise as
● Back pull-out design. viewed from motor end.
Pumps are designed and developed
for hot and cold water handling and ● Flange mounted motor ensures ● Operating temperature :
occupy minimum floor space. These easy maintenance. 0
Suitable for 65 C water.
are power driven centrifugal monoset ● TEFC motor with class 'F' insulation
pumps. and temperature rise restricted to Electric Motor
class 'B' for long life.
Features ● TEFC, SCR, 2 Pole (3000 RPM
● Volute and adaptor are fitted with syn. speed), Electric Motor 415 V,
● Vertical In-line design means bronze wearing ring for least
minimum space requirement, easy 3 phase, 50Hz , AC supply with
internal leakage. class 'F' insulation and temperature
installation with smooth and quite
operation. ● High quality and long life rise restricted to class 'B', for
mechanical seal. ambient temperature upto 400C.
● These are single stage, single 0
suction monoset pumps and are ● Suitable for 65 C water with ● Special Motors with different
mounted by their suction and standard mechanical seal and 1100C enclosures, supply voltage,
delivery flanges, with additional water with special mechanical seal. frequency and ambient can be
support, if required. ● Rust-free bronze impeller. offered on request.
1 Motor _
1
2 Shaft Graded Cast Iron
3 Adaptor Graded Cast Iron
4 Aircock Brass
2 5 Volute Casing Graded Cast Iron
8 3 6 Delivery Flange Graded Cast Iron
9 7 Base Plate Graded Cast Iron
4
10 8 Mechanical Seal _
11 5 9 Wearing Ring Brass
6 (Adaptor)
12 10 Impeller Graded Cast Iron
7
/ Brass
11 Wearing Ring Brass
(Volute)
12 Delivery Flange Graded Cast Iron
68
PERFORMANCE CHART
Total Head in Metres
Pipe size Motor
Rating Suc. x Del. 10 12 14 16 18 20 22 24 26 28 30
kW (HP)
(mm) Discharge in LPM
ILM7.52/A 100 x 100 5.5 (7.5) 1300 1260 1200 1110 1000 850
ILM10.2/A 100 x 100 7.5 (10.0) 1400 1320 1250 1180 1090 1000 900
Notes :-
1. The above performance is based on rated voltage (415+6%-15% for 1 Phase) and rated frequency (50Hz+3%).
2. The above performance is subjected to tolerances as per applicable standards.
3 Pipe sizes mentioned in mm are nearest conversion of inches, but actual pipe threadings are provided as per 'BSP' standard
4 Total Head = Static Suction + Static Delivery + Losses in pipes, bends etc.
A Ø D 4 HOLES FOR
FOUNDATION BOLTS
H
B
E
BASE PLATE
`X'
Ø M 4 HOLES EQUI
SPACED ON PCD N.
W
ØG
ØK
ØJ
F C
L
VIEW -'X' FLANGE
ILM052/A 120 112 140 12 75 140 32 70 120 14 90 280 200 370 24 41.5 0.08
ILM12/A 120 115 150 12 82 150 40 80 130 14 100 300 210 430 33 54 0.105
ILM22/A 120 120 160 12 100 150 50 90 140 14 110 310 265 475 48 74 0.138
ILM32/A 130 120 180 12 115 165 65 115 185 18 145 345 285 510 59 88 0.16
ILM52/A 135 120 190 12 130 185 80 128 190 18 150 375 315 550 71 101.5 0.182
ILM7.52/A 178 130 255 12 140 235 100 148 210 18 170 490 340 615 101 140.5 0.265
ILM10.2/A 178 130 255 12 140 253 100 148 210 18 170 490 340 650 117 158.5 0.28
69